Volvo Penta has been producing boat engines since 1907 and are world leading in this seg­ment. They have today an extended range and also sell industrial power stations. Quality, safe­ty and environmental care are three core values for Volvo and together they strive to give their customers the right product with the right quality.Volvo has developed a production system named Volvo Production System, VPS, and one of the pillars is continuous improvements. Within this pillar you can find value stream map­ping, which is used to analyze the value stream through the process. This tool gives a wide perspective and helps to keep focus on the entire process instead of just parts of it.Volvo Penta in Vara has earlier done value stream mapping but without good results since they didn?t take set-up times and imbalances in account.

Industries with energy costs as a large proportion of their total costs are greatly affected by the instruments deployed to cope with the Swedish climate and energy policy goals. With energy costs representing more than 30 % of the total costs, tomato cultivators are one of the affected industries. In order to remain competitive with other countries, a more resource- and cost-efficient cultivation of tomatoes in greenhouses is desirable in Sweden. Based on the concept of industrial symbiosis, this study investigates the prerequisites for a resource-efficient production of locally grown tomatoes in Sweden through the utilization of low grade industrial waste heat. The study is based on the foundry industry as the supplier of waste heat.To investigate the environmental, technical and economic potential of the exchange of waste heat, a comparative life cycle assessment, an inventory of the supply of industrial waste heat in Sweden, a compilation of potential technologies for the recovery of low grade industrial waste heat for heating greenhouses and a comparative life-cycle cost calculation were carried out.

The purpose of this thesis was to examine how the build-up of customer relations can be characterized at the end of the industrial selling process and how companies engage their cross-functional selling teams into this relationship building effort. Through a case study of Omega, a multinational company engaged in the selling of products of an industrial character, it was revealed that the build-up and maintaining of the customer relationship is of acute importance, as it presents the company with a window of opportunities. Through its relationship with the customer the company can be able to sell other products, which are related to the original purchase made by the customer. For the company?s competitors the established relationship might also serve as a barrier when attempting to enter the market or increase market share.

This report that is written in cooperation with Peab Sverige AB, studies the information and knowledge management from the production support to the production management. The conclusion of this report is that to have a good and functional information and knowledge management it is necessary that the company has a good way of regain and handling experiences from its projects. The way to do this is to develop the managing system on the production management?s terms. It is also critical to find an easy way for the production management to use the system..

A large part of the time losses in production in modern manufacturing industry are a cause of unplanned interruptions in production. In this essay we have studied the effects of an unplanned interruption in production. The study was performed during one month on a press production line at Volvo Cars Body Components (VCBC) in Olofström. The effects of the interruptions have been studied on the basis of two perspectives of the environment of the production. The study started at the level of automation and was mainly done as a survey of the unplanned interruptions in production.

Syftet med det här examensarbetet är att undersöka om det är möjligt att överföra hallbyggnadsteknik till produktion av småhus för att sänka produktionskostnaderna. Studien visar att hallbyggnadsteknik enkelt går att överföra till en villa. Dessutom blir det billigare att bygga klimatskalet med vårt byggsystem jämfört med ett traditionellt prefabricerat småhus. Genom detta system kan den totala byggkostnaden för villan i jämförelsen sänkas med 3-10 % beroende på vilket fasadmaterial som väljs..

En historisk fallstudie om strukturförändringar i Matsushita Electric Industrial Co, Ltd under 1933- 2003..

ABB Capacitors is looking to introduce LEAN within their organization. The purpose of this research is to suggest ways to improve the production planning in order to facilitate the company?s production processes. This should be done in accordance with the LEAN concept.Today, ABB will produce two of the customers? orders at the same time.

The worldwide industrial demand of energy, often in form of fossil fuel, is continuously growing and at the same time these resources are coming to an end (Hamamre, 2013). The interest and focus in renewable sources are then more important than ever and plants are suggested to be a good alternative for production of raw material for industrial purposes (Nilsson et al., 1998). But the world is also facing an increasing world population which also increase the nutritional needs, plants therefore need to be suitable for both industrial and nutritional purposes. To achieve this, common plants need to be improved but it also need new potential crops to be developed and introduced (Carlsson et al., 2009). Modern technology like gene engineering is an important tool to achieve these challenges (Carlsson et al., 2011). This work focused on analyzes and evaluation of different transgenic lines of field pepperweed (Lepidium campestre L.).

The purpose of this study is to investigate how much of the estimated annual electric energy production from Swedish wind power that actually was produced, as well as the history of this agreement over time. The aim is to also examine if there are properties that have caused some group of wind power plants to produce more or less, compared to their estimated production. Operational data on wind turbines collected by the Swedish Energy Agency was analyzed. A survey was made among owners of wind power plants with a nominal power of at least 2 MW. Two different methods for normal year correction of production data were used and compared.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

When constructing an industrial- or hall building, the most common framework materials thatis used are wood, steel or concrete. Due to an assignment from Byggnadstekniska Byrån ABhas a document been created that makes it possible to investigate how the final costs is af-fected by gapes in between elements and which used foundation. And this with steel as thematerial. The purpose with this essay is to investigate which is the most well fitted materialwhen constructing an industrial- or hall building wood, steel or concrete. Information aboutthe different materials has been collected by litterateurs and by different internet pages.

Today, there are few industries left in our cities. Industrial areas thatare located in urban settings close to water or city centers are oftenreplaced by housing. In my thesis I want to explore how such industrialsite located in an urban setting can be transformed into anindustrial park where the industrial structures are saved. By approachingthis type of environment in a positive manner, I wish tohighlight the potential aesthetic and functional value in the existingindustrial structure. Through the transformation and design of anexisting industrial site I will convey the previous use and history ofthe place.The wastewater treatment plant, Kungsängsverket, is located in thedistrict of Kungsängen in the southern part of Uppsala.

Rooted in Industrial Ecology (IE) theory, this report evaluates how urban agricultural concepts and techniques, can contribute to improved ecological sustainability within the inner city boundaries of Stockholm. An overarching literary study as well as an interview was carried out, resulting in a qualitative analysis followed by suggestions for practical implementations. A substantial convergence was found between the eco-restructuring objectives of IE and the principal motives for urban agriculture. Consequently, eco-restructuring objectives are found in varying degrees in the presented urban agricultural techniques. Industrial symbioses, permaculture and combinations of urban agricultural techniques are tools which are capable of corresponding adequately to the diversity of urban settings.

I chose to do this work because I believe that today?s industrial designprofessionals lack in their task of creating aesthetic experiences and aestheticdiversity.With my work, I want to question why the majority of today?s technical, massproducedeveryday products have such a similar design expression, andwhy alternatives are so few. Most of all, I take a critical attitude to today?sstereotypical industrial design aesthetics that I would describe as technical,masculine, and unnecessarily complex.I have designed a number of products that show alternative aesthetics in thissegment and as such I have chosen the vacuum cleaner. The idea is that mydesign will serve as an eye opener and demonstrate that there are alternativesto today?s homogeneous market.The result is three vacuum cleaners claiming three alternatives to currentofferings.