Test bench for air bearingsThis thesis work consisted of bringing forward and defining the test parameters relevant for a test bench and constructing a test bench that can test and verify the largest existing air bearings that are of use in Micronic Laser Systems AB machines. Because the knowledge about air bearings is limited it is thought that with the help of the test bench the knowledge would increase and in that way improve the air bearings.After learning more about air bearings and their purpose at Micronic Laser Systems AB, I started the concept phase for the test bench. For each part in the test bench I consulted my two tutors, Torbjörn Hedevärn and Johan Bergqvist, at Micronic Laser Systems AB. The final concepts where documented as 3D-modells in Solidworks and some of them have been tested in Solidworks FEM-program.The test bench is designed so that, with the help of a pneumatic cylinder, 25 kilo weights are placed on the air bearing to test its stiffness, damping and the pressure performance under its surface area. To test these parameters the test bench has to have a pressure meter, accelerometer and a microcator.

The purpose of the present quantitative study was to examine gender differences inperceived job satisfaction in two departments, with different work patterns, in a Swedishmanufacturing industry. The questionnaire contained 30 statements and five backgroundquestions. The questionnaire was designed in combination of Job Satisfaction Survey (JSS),Work demands, Social support, Control and Competence (ASK), Questionnaire forPsychological and Social factors at Work (QPS Nordic) and Minnesota SatisfactionQuestionnaire (MSQ). Job satisfaction was measured based on the categories influence atwork, leadership, employee influence, work requirements and the physical environment. Theresults of the present study showed an interaction of gender and department where the femaleindustrial workers, who worked with more monotonous and standardized work tasks, valuedall of the categories of job satisfaction the lowest, except for the category employee impact.The results are believed to depend on that the women in the department had greater demandsfor variety in the work..

Detta examensarbete omfattar 15 hp och utfördes av Jelena Todorovic, student på Malmö Högskola, Produktdesignprogrammet. Syftet med arbetet var att utveckla en sportbag för personer som bor i närheten av ett gym och som efter träningen duschar hemma. Projektets bas var Användarcentrerad design, som innebär att utvecklingen av konceptet sker efter användarens behov, önskemål och preferenser. Användaren inkluderades i projektet i allt från skisser, intervjuer, observationer, utvärderingar och urval av koncept till slutkonceptet. Studenten såg ett behov av en annan väska än den traditionella sportbagen. Projektets förstudie resulterade i att studenten sammanställde en kravlista på målgruppens önskemål och behov. En sportbag där funktionaliteten var viktigast kom att bli projektets fokus.

This study investigated the relation between Extraversion and Conscientiousness with job satisfaction and job selection in the two occupational groups of telemarketing and administration. The study also set out to explore the relation between social desirability as assessed with an Implicit Association Test (IAT) and total reaction time on the IAT. The questionnaire was administered over the Internet to forty-one subjects (24 women and 17 men) in the age range 16-65. Results indicated that people working with telemarketing tend to be extrovert while people working with administration often are conscientious. Job satisfaction correlated with Extraversion in the telemarketing group.

The development of IT systems is usually accomplished by some form of system development methodology. It can be performed as the waterfall method, where each phase is completed before the next begins. One of the reasons to follow a development methodology is that the process is more structured, faster and that the product will have higher quality. One risk of not using a system development approach is that the code can be unstructured and difficult to maintain.This paper describes an alternative method in which the development occurred without the use of any system development methodology. This has been possible because there was a clear goal of the program that should be developed.

Dressage schooling is not a subject that rests on science, it is a matter of dependable experience. So far there hasn?t been so much research about it, but more and more is done. Especially the interaction between rider and horse is a nearly uninvestigated field. Riding skills is much about having the right position, and having the horses head and neck in different positions, but there are no research done that support or deny that this old ?knowledge? is for the best for the horse. This study was performed to evaluate if the head and neck position of the horse, and the velocity, has any influence on the position of the rider.

During spring 2007, I Matilda Lindblom, undertook my Bachelor Degree project in Furniture Design. The supervisors were Agneta Stake at Nola in Stockholm and Leo Jóhannsson, teacher and examiner at Carl Malmsten CTD in Stockholm.The project was based on three elements:? Cooperate together with a producer for professional supervision? Learn to work from a given design brief.? To learn more about industrial production? Learn more about furniture for public areasI contacted a furniture producer called Nola AB, in Stockholm, who became my work partner during this project. The asked me to design a piece of furniture where you can sit and work with a laptop on. The target was for public areas, for example in parks, malls, or at airports.In cooperation with Nola, my ambition was to develop this piece of furniture that was the answers on their wishes and demands.

The purpose of this work was to investigate and provide understanding regarding how AI can be used to make organizations more efficient, where risk management is also discussed. The basic model for the study is the Resource-based view, which is about making use of one's resources which are described through many different perspectives. The method used for this study was a qualitative analysis, which was applied through interviews with several people with high positions within companies and relevant skills, based on insight and experiential knowledge.These people work in different industries, therefore a large part of the work was intended to carry out a comparative analysis between a line of different businesses. The results showed that AI is in a developing phase, and based on the respective industry, it has developed in different ways. Finally, it turned out that AI can make businesses more efficient by, among other things, managing data and automating various work processes faster compared to humans.

In today?s industry it is starting to get more and more interesting with wireless systems and solutions for applications. To be able to reduce the amount of cables drawn to various machines which takes both space and an extra fee for every cable drawn. Some systems might require the user to use a handheld device that is directly connected by a cable which in some machines might be inelegant for the user.The goal with this bachelor thesis is to develop wireless monitoring of the machine operators position that is working with heavy industrial machinery. The thesis started out with researching different techniques for positioning a transmitter indoors, this was done in order to get a better understanding on how to go about.

In recent years, employees at large companies have started to demand that their employer should work more for good causes. The money the company wants to donate to charity is distributed mostly through a vote to decide where the money will be remitted. The purpose of this design case is to develop a design concept for a web-based donation service that involves all employees at a company. Furthermore, the authors of this study intends to explore how the motivation for employees of a company can be affected by participation in this service. In this design case, the service function, quality and concept was tested and evaluated.

The forest is characterized by many different values such as those related to forest productivity which are of a big importance for Swedish economy. History has proved that forest resources had helped the country in the transition from the agricultural to the industrial society. Today Swedish forest industry is among the strongest in Europe and significantly contributing to the Swedish export. The industry provides many direct and indirect job opportunities and is one of the biggest employers in the industry sector. It is also worth to notice that the forest can also generate an additional income for the owners, even if the forestry isn?t their primary income source.

AbstractGlobalisation has lead to changes on many levels of our society; -industrial, technological, and corporate to name a few. This is an ongoing process which affects the society we live in today. The process is affecting the working-conditions for everyone through the changes of the relations on the working market. The unions have enjoyed a very special role in Sweden for a long time, but that role is now affected by these changes. The relationship between state and unions is changing, and the unions? influence in politics is decreasing.

The present study examines the effect of a nine-hour Acceptance and Commitment Training (ACT) intervention for teachers who experience stress. Twenty-two teachers from four different counties in southern Sweden were randomly allocated to an ACT intervention (n=15) and a control group (n=7). The ACT condition received three three-hour sessions of ACT over a six-week period, and the control group received a three-hour stress lecture at one occasion. At a follow-up four-weeks after completed intervention, ACT participants showed significant in-group differences on stress, psychological flexibility, general health, and burnout. At a between group comparison, only psychological flexibility was significantly enhanced at the follow-up.

Internet has opened a whole new world when it comes to marketing. Because of this companies can reach out to a broader consumer audience. The idea to write this essay came to mind, when we were asked to design the website of a new registered company named Artoteket. The company?s purpose is to hire out and market art on the Internet to bigger companies such as banks, law firms and industrial company?s etc.

The aim of this Bachelor?s thesis is to obtain understanding and knowledge about how literary scholars collaborate regarding information. Seven scholars have been studied in the aim to find out social and cultural elements which create particular prerequisites for their practice, with focus on information sharing. The method used has consisted of semi-structured interviews. The informants have been studied from a socio cultural and domain analysis starting point, which means that they are studied in the light of being members in their practice.