Hypertrophic cardiomyopathy (HCM) is the most common heart disease in cats. Maine coon is one of the breeds where the disease is overrepresented. Studies have shown that HCM is inherited as an autosomal dominant trait in Maine Coon cats. This finding has led to cardiac screening using ultrasound in the breed. The results of the screening are used in a national breeding program constructed to reduce the spread and incidence of HCM in Maine Coon cats.

Högbytorp is Ragn-Sells? largest waste facility and it is located north of Stockholm. There is an old landfill still in use, but at the end of this year it will be closed. The waste deposited on the landfill can, through decomposition, give rise to a large amount of methane gas, which is an energy rich gas that can be used for heat and electricity production. To receive a relatively large amount of gas, the decomposition requires a high moisture content in the waste.

This study was conducted on behalf of SCA forest AB, Västerbottens forest administration. Timber procurement from non-industrial private forest owners has become an increasingly important part of SCA:s wood supply. The objectives of this study was to report the current forest conditions in the private forests in the county of Västerbotten, analyse the potential for procurement of wood from private forest owners, and provide a basis for decisions on future strategies for timber procurement from private owners.Material and data have been collected from different sources, mainly from Swedish National Forest Inventory and SKA-VB08. This material was the basis for the analysis and calculations performed with the Heureka application PlanWise. This study area was divided into six different analytical areas (Coastal south, Coastal middle, Lycksele, Inland south, Inland north, Skellefteå), where each area of analysis is represented by a number of municipalities.In this study, two scenarios were specified; one describing the current forest management with current harvesting levels and the effects of these assumptions, the second to illuminate what potential there is for future timber harvesting.

This report covers a product development project conducted as Bachelor of Science thesis forthe Innovation & design engineer program at Karlstad University.The assignment was supplied by MMB Consulting, Kristinehamn. The purpose of this projectwas to find an alternative way of shaping wire-net insulation mats. This insulation product isused for fire and thermal insulation of technical installations. The insulation consists of stoneor glass wool with a sewn on steel wire netting on the out facing side. This netting has thepurpose to enable fastening to e.g.

Både under min tidigare utbildning, främst inom nationalekonomi vid Lunds universitet, men även senare i min yrkesutövning inom bygg- och fastighetsbranschen under en period av 15 år, har jag främst kommit i kontakt med problemställningar vilka i någon mån haft som syfte att utmynna i en slutsats med kvantitativ relevans. Då jag som del av programmet Urban utveckling och planering skulle skriva en uppsats på D-nivå, ett arbete som resulterade i förevarande rapport, valde jag därför en problemformulering och en metod som båda gav mig möjlighet att bredda min kompetens, snarare än fördjupa den. Denna studie strävar efter att utveckla en teori för stadsutveckling ur ett fastighetsföretagarperspektiv. Den specifika situation som arbetet fokuserar på är stadsdelen Norra Sorgenfri i Malmö. Teorin har genererats med användning av metoden grundad teori och datorprogrammet Atlas/ti. Läsaren finner förhoppningsvis att den teori som utvecklas har en allmän relevans för stadsutveckling och hur kommunens planarbete kan förändras. Den som är intresserad av just vitaliseringen av Norra Sorgenfri bör också kunna finna något av värde.

Abstract Project as a method was defined in the American defense industry in the 1950´s and has since then developed to encompass many different areas such as industrial management, administration, research and development and IT etc. In the cultural sector project is a common way of organizing work and within theatre, which is the focus of this study, one can claim that project as a form of work has been used for hundreds of years, if not by definition.Theatre is generally assumed to be an form of art representing creativity and innovation, highly demanding from an individual perspective relative to the project result, i.e. the final performance. Time pressure, fierce competition, limited resources and responsibility to deliver on time with high quality are natural conditions given.The aim of the study is to find out what circumstances and conditions affect and have a clear impact on motivation and creativity in those working professionally within theatre.This study is based upon qualitative interviews with a limited number of employees with different occupations, within a major publicly-funded Swedish theatre institution.Contemporary research indicates both intrinsic and extrinsic motivation as essential for how we experience and commit ourselves to our work, either as two separate forces but also as they interact.Extensive studies further state our individual experience from work, the conditions provided by the organization and social environment as crucial to our work performance. A positive experience from these factors enhance our motivation and creativity.The results of this study show theatre to be an activity supported by strong visions and clear goals where challenge and creativity are essential and where it´s members show strong commitment to the task whether they are beside or on the stage..

Sahlgrenska AcademyAt University of GothenburgDepartment of Internal Medicine and Clinical NutritionAbstractTitle: The obesity paradox, myth or truth in adults with cardiovascular disease.Author: Louise Svensson och Amanda NilssonSupervisor: Fredrik BertzExaminer: Ingrid LarssonProgramme: Dietician study programme, 180/240 ECTSType of paper: Examination paper, 15 hpDate: May 30, 2013Background: It has long been generally accepted that obesity is a risk factor for many diseases. Despite this, new research indicates that a higher BMI could be a protective factor for those with a chronic cardiovascular disease. This discovery is called the obesity paradox and could change the perception of patients' BMI in both public health and clinical work.Objective: The objective of this systematic review article is to examine the scientific evidence for the existence of the obesity paradox in chronic cardiovascular disease, i.e. if a BMI >25 kg/m2 is associated with lower mortality among adults with chronic cardiovascular disease.Search strategy: The databases used in the literature study were PubMed, Summon, Scopus and Cochrane. The keywords were: obesity paradox, cardiovascular, heart, male, BMI, intentional weight loss, cardiovascular mortality and mortality heart failure.Selection criteria: Studies, which had an adult population classified after BMI that suffered from chronic cardiovascular disease and had all-cause mortality and cardiovascular mortality as endpoints, were included.Data collection and analysis: Ten studies were included.

ABSTRACT Epilepsy describes a neurologically caused condition which involves seizures. Epilepsy can be classified according to different types of causes and the nature of seizures can vary. Medication for epilepsy in dogs is limited in comparison with human medicine. Idiopathic epilepsy is the most common neurological disease and one of the most common genetic diseases in dogs. Because epilepsy has a higher prevalence in certain breeds, there is reason to suspect that it is a hereditary disease. The inheritance of idiopathic epilepsy is for most breeds not determined, except for a few variants of the disease.

Abstract The purpose of this project is to develop a modular processor card which is intended to work as a platform for Kitron Development Karlskoga. The modular processor card is meant to be used as a control system in development projects, mainly in medical and industrial products. The processor card will consist of a central unit with the basic functions for a control system. Furthermore there will be complete modules with machine commodity and programming, to pick exactly the necessary functions for a specific application. With consideration to the specification of the development and the main unit, I chose an adequate microprocessor (AT90CAN32) as core and interface circuits to stated border areas. The construction is first completed in the program MultiSim and then remade in the program OrCAD Capture. The programming language C was used in the software model.

Purpose: The aim with the report is to investigate if the South East Asian customer on the food processing market base their investments on Total Cost of Ownership and if so, which are the cost drivers considered most vital. Moreover, do these cost-drivers diverge from the perception FP Ltd has, and if so, can a Total Cost of Ownership-model help to achieve a mutual understanding? Methodology: First a descriptive approach will be taken, identifying FP Ltd?s employers? perception on how to meet the customer. This will later be compared to our empirical findings of the actual customer behaviour in Thailand and Vietnam. Thorough analyse of the gap between the two parts will give us the outcome whether or not FP Ltd will have any use of presenting a quantitative model justifying their higher price.

Spectacular buildings and categorized districts are becoming more common elements in cities. In many cases, they are the result of city branding, which means choosing a city image and dealing with it like a brand to profile and compete against other cities. This essay study what impact on and roll in urban planning the trend might have. The first part relies on literary studies and describes what has been written about city branding. The globalization, the experience economy, urban management, urbanization and the theory of the creative class are pointed out as driving forces of the popularity and the spread of city branding.

The meaning of the concept of psychosocial treatment is ambiguous. The purpose of this study was to examine how professionals within some care institutions, which provide methadone, buprenorphine or naloxone treatment, regard and carry out the psychosocial features of such treatment. Central issues discussed were; how personnel approach the psychosocial features of the treatment, what personnel regard as a focus in the psychosocial treatment, what conditions personnel consider affect treatment positively in order for it to be successful and how personnel see the relation between the medical and psychosocial features of the treatment. The method used was interviews with nine professionals in six qualitative interviews. The theoretical perspectives and concepts used in our analysis were; the theory of biological dependence, an organizational perspective, Prochaska and DiClemente's Stages of Change Model, the concept of individual reality and the concept of marginal conflict.Results show that the conditions most important for successful treatment are; that the patient has a place to live, an occupation, motivation, that the patient take responsibility for his/hers progress and have realistic expectations about the effects of the medicine.

This paper presents the result of a master thesis project at 30 Hp, master of industrial engineering at Luleå University of Technology. The project was performed during 20 weeks, spring 2014, in collaboration with ABB Control Products in Västerås. The aim of the project was to evaluate two half-automated assembly lines for a new generation of contactors, the NAFC assembly lines (New AF Conductor). The aim and purpose of the project was achieved by answering the following questions:? How are the ergonomic working conditions at the NAFC assembly lines during spring 2014?? Which areas at NAFC assembly lines can be improved for the work environment?? How can the ergonomic work conditions improve at the NAFC assembly lines?Literature reviews were performed from earlier research papers and articles of the ergonomic, musculoskeletal and work environment subject, from where a number of chosen methods and tools were used to perform the ergonomic evaluation.

Bakgrund Barn finns ofta bland de drabbade i samband med allvarliga händelser och har utifrån ålder och mognadsgrad behov som skiljer dem från vuxna i dessa situationer. Sjukvårdspersonal anger att det är svårare och mer påfrestande att hantera situationer där flera barn drabbats, men sjukvårdens förmåga kan optimeras om barnaspekter uppmärksammas rutinmässigt vid utformning av katastrofmedicinsk beredskap. Internationella rapporter anger att barnaspekter ofta förbises vid utformning av katastrofmedicinsk beredskap, men ämnet är bristfälligt kartlagt i Sverige. Syfte: Att undersöka om barnperspektivet uppmärksammas vid utformning av katastrofmedicinsk beredskap på regional nivå. Metod: Enkätstudie där populationen utgjordes av Sveriges 21 beredskapssamordnare på regional nivå.

Research question: How does the industrial company Scania work to get more women in leadership positions?Purpose: The purpose of this work is to describe how companies in a male-dominated industry can work to get a higher share of female leaders.Method: This survey was based on a deductive approach with a qualitative method. Theories have been obtained primarily from scientific articles and the empirical part has been collected through interviews from the companies Wiminvest and Scania.Conclusion: The conclusions the study came up with was different elements that companies in male-dominated industries can work with to get a higher share of female leaders. The first thing that companies can do is to join the project BON or similar projects to work on this issue. They can work with workshops and lectures to disseminate knowledge about the topic.