In past decades information technology has changed the conditions of organizations, not at least within the industry. Advanced IT systems have become a fact in order to cope with rapid changes in the market and to effectively manage an organization?s knowledge. When organizations became more flexible and customized expectations from customers and stakeholders also become higher. These expectations and guidelines are documented in a company?s management system, which can be designed differently depending on what standards the company chooses to implement.

In this report a system for Rapid Control Prototyping, RCP, is evaluated through animplementation of the motor control methods Field Oriented Control, FOC, and Space VectorPulse Width Modulation, SVPWM. The evaluation emphasizes on time-consumption andresource utilization on the used hardware and on usability for of software.A new mechatronic laboratory is under development at ABB Corporate Research in Västerås. Itwill be used for both mechanical and motion control design using existing and new hardware.The control structure in a traditional robot system will be interfaced to a rapid prototypingsystem which should allow easy changes to algorithms at different levels in the system.The system designated for this project comes from National Instruments and constitutesLabVIEW Real-time and FPGA module as the software tools. The hardware is a NI Single-Board RIO (Reconfigurable Input Output), sbRIO, development board including a Field-Programmable Gate Array, FPGA, from Xilinx and a microprocessor from FreescaleSemiconductor. Graphical programming is performed in the LabVIEW environment, andthrough Xilinx tools the LabVIEW FPGA code is compiled to VHDL code.A pre-study was carried out to clarify the concept of RCP and investigate different systems forRCP and their traits.

Problem discussion: That empowerment and autonomy can lead to desirable effects on employees is clear. Previous research has found correlations between empowerment and e.g. motivation, job satisfaction, productivity, loyalty and commitment. However, a control problem arises when employees have more freedom in decision-making which could potentially lead to undesirable outcomes. It thus becomes a type of dilemma for management and managers where you have to try to balance a restrictive use of the control system (to maintain control) and an enabling use (to promote empowerment).Purpose: The purpose of this study is therefore to identify how a company can use its control system in order to achieve empowerment while maintaining acceptable levels of control.

This project investigated the current market regarding wireless net and the communication between the tools used for diagnostics/maintenance and an embedded system. Based on documentation obtained through interviews a demo system was created based on Bluetooth Low Energy (BLE) communication between an embedded system and an Android device.This report intends to describe the tools and methods used in the design of the demo system and the result of an analysis of the BLE communication.Bluetooth Low Energy is an exciting protocol with wide applicability within the industrial field. This project investigated the communicational possibilities between a Smartphone and a Raspberry Pi and based on the results that emerged the conclusion can be drawn that BLE is a protocol with many beneficial applications within industrial IT..

In past decades information technology has changed the conditions of organizations, not at least within the industry. Advanced IT systems have become a fact in order to cope with rapid changes in the market and to effectively manage an organization?s knowledge. When organizations became more flexible and customized expectations from customers and stakeholders also become higher. These expectations and guidelines are documented in a company?s management system, which can be designed differently depending on what standards the company chooses to implement.

When a helicopter is flying, the dynamics vary depending on, for example, speed and position. Hence, a time-invariant linear model cannot describe its properties under all flight conditions. It is therefore desirable to update the linear helicopter model continuously during the flight. In this thesis, two different recursive estimation methods are presented, LMS (Least Mean Square) and adaptation with a Kalman filter. The main purpose of the system estimation is to get a model which can be used for feedback control.

Abstract Titel: Budget development ? a study of multinational industrial companies Date: 2011-05-27 Authors: Daniel Claesson & Tobias Kronvall Supervisor: Fredrik Karlsson Examiner: Lars-Göran Aidemark Purpose: The main purpose of this study is to follow up and to do a comparison                of a study of Arwidi & Samuelson (1991) where we describe and explain budget change, from the traditional budget to today´s modern business management, in some of the leading listed Swedish industrial companies. We will also examine which objectives of the budget are highlighted in the companies. Further, we examine the relationship between                         organization, strategies and budgeting and how it affects the company            management. Method: In this study we used a qualitative approach. We used a multiple case                  study to examine corporate approach to budgeting.

In this bachelor thesis, diagnostic methods for one of Siemens stem inlet control valves have been developed. The work has taken place during ten weeks at Siemens Industrial Turbomachinery AB in Finspång. The company produce steam- and gas turbines and also provides service and maintenance. The purpose with this project has been to develop diagnostic methods that oversee the health of the control valves. By using the developed methods you will know when it?s time for maintenance.

The implementation of a material requirements planning system is a complex and demanding task. There has been much research into what factors are important in such implementations, but seemingly very little about the links between critical success factors and management control systems. This thesis attempts, through a case study, to answer the question of how management control systems affect the implementation of an MRP system in ASSA AB, a Swedish manufacturing firm. Data is primarily collected through interviews. Theory regarding implementation success definitions, critical success factors as well as management control systems is presented.

The National Property Board (SFV) has been appointed by the Swedish government to administer all property of cultural value owned by the Swedes collectively. The commission includes maintaining the soul and character of each individual building, to adapt these buildings to present needs and requirements, and furthermore making them available to the public. The return on equity demanded by the government is based on the CAPM used within the real estate industry. The theoretical assumption that organizations are either function-driven or pay-driven will serve as a starting point, after which SFV will be defined as a function-driven organization with a pay-formed management control system. This paper aims to examine how applying a pay-formed management control system will affect a function-driven organization.

The purpose of this project was to further develop and complete a quadcopter that had been built in an earlier course at KTH, so that it could be used for demonstration and education at the school. The quadcopter was at the beginning of the project completed when it came to hardware, and there was some software functionality implemented but no system for automatic stabilization. The main goal of the project was to implement such a system, and to combine it with the previous functionality to make the quadcopter operable and able to fly. To create a functioning and stable ground multiple basic software features has been implemented, and on top of that additional software to improve the safety, stability and functionality. The most important part is the control system that is responsible for converting sensor and control signals to suitable motor values.

The Swedish society woke up Boxing Day 2004 to the greatest disaster in modern times. As a result of a strong earthquake in the Indian Ocean tsunamis occurred that devastated resorts where thousands of Swedes were. In the disasters tracks were uncovered government paralysis and shortcomings of the systems control. The purpose of this study is to examine the capacity and means to demand accountability of politicians and officials of the Swedish political system. Extensive studies and the report from the commission of disasters will form the basis for the study.

This essay aims to examine managers experiences of control at the workplace within the property sector, and how these experiences differ between female and male managers. This study is a qualitative single case study that intends to offer a deeper understanding of a unique case and uses an abductive method approach. The essay is based on two main theories, Foucault?s (2003) theory of control and the gender system of Hirdman (1988, 2001) and is supplemented by previous studies of the modern workplace. The study is based on eighteen semi-structured interviews that aims to capture the participants personal experiences regarding control at the modern workplace, and the norms, surveillance, hierarchies, and self-discipline that make up this control.

Energy efficiency is important both to reduce costs and to reduce greenhouse gas emissions in the atmosphere. Reducing costs will also help maintain business competitiveness.Scania in Södertälje is a company where the optimization of energy use is an ongoing and continual process. One area with potential to make energy and cost savings is the effectiveness of the ventilation systems in offices and industrial premises at Scania. During the summer months an increased demand for cooling occurs, leading to increased ventilation and a peak in district cooling system usage. Sorptive cooling is a technology where the supplied air is cooled by applying external heat.

Aims The aim of this study was to investigate how personnel within food control are regarded from different perspectives and to find the answers to the sub questions:- what is included in the profession of food control?- what are the requirements for personnel within the profession of food control?- how is the profession perceived from different perspectives?- how do personnel within the profession of food control estimate their psycho social working conditions?Method The study included 68 individuals (34 female and 34 male) and was conducted via observations, web-based surveys and survey-based interviews. Conclusion - The study was feasible.- The overall goal of the study as well as the research questions were answered to and contributed to clarify what is included in the profession of food control. - Quality measures should be implemented to greater extent within the development of the national food control system..