During the past few years an increased attention has been paid to environmental issues in the construction and property sector in Sweden. In order to simplify the work with these issues a Swedish environmental certification system for buildings called Miljöbyggnad has been developed. This thesis aims to investigate the opinion of a selected number of selected property owners of Miljöbyggnad. From that basis recommendations and actions for the future work with the system will be presented.The investigation has been conducted through personal interviews with five property owners. The main issues that the interviews have been based on are their purpose, experiences, perceived complications and future prospects in terms of certification using Miljöbyggnad.The system intends to be cost-effective, simple and to offer a relevant environmental assessment of buildings and the result from the report indicates that this is largely fulfilled.

The building industry consumes approximately 40 % of the total energy consumption in Sweden, where the using stage is dominating with 80 %. There is a lot of work in progress to reduce energy use in the building industry, and the demands from authorities regarding energy use increases. As a part of this work Building and planning department of Sweden has established a requirement that has been applied since 2006, and restricts a maximum energy use for buildings.The requirement includes that an energy simulation must be done in advance to demonstrate that it is possible to meet the demands.Reality is however more complex than an energy simulation program, that frequently underestimates the energy use of buildings. The purpose of this thesisis to study and analyse deviations between estimated and actual energy use in modern apartment buildings. The study includes four apartment buildings in Stockholm, Gothenburg and Jönköping that were built in 2007-2009.

Interior window shutters can be found in historical buildings, but they are an uncommon occurrence in modern buildings. In modern contemporary construction, large glass panels are often the ideal because of increased light inflow and for architectural purposes. However, this can generate several negative effects, such as increased energy loss, lack of privacy and high sunlight penetration. Problems that window shutters could have accommodated historically. This thesis identifies a lack of knowledge about interior window shutters in the Swedish building stock.

During the 19th centaury Liverpool was an industrial city of great magnitude owing to the well-established communication and infrastructure in the area. During the 1950?s the industry decrease swiftly - and although Liverpool as a city gain interest as a result of the sensation of the Merseybeat and The Beatles - the reduction continued through the 70?s and during the 80?s the people of Liverpool suffered from great unemployment. Today Liverpool is a post-industrial city with a growing experience economy that mainly benefits from The Beatles tourism and the Merseybeat-era. The focus of these studies is the experience economy in Liverpool as a result of globalization and production in the late modernity.

In industry applications, such as power supply plants, the issue of interaction between fluid and structure is always presented. More precisely, the fluid flow affects the structure by applying force(s) on it and vice versa. As a result, the structure can move (vibrate) or deform. A good understanding of this problem can help to design the system in term of safety, stability and efficiency.This project aims to optimize and test the Unicorn FSI solver from the FEniCS project [1] to simulate the interaction of fluid and structure in an experiment, which was carried out at Vattenfall Research and Development. The target is to improve the Unicorn FSI solver to cope with a real industrial problem.

This thesis is based on a case study for the real estate manager Mimer in Västerås. Mimer provides a great deal of this city?s rental apartments. Many of their buildings have ventilation systems with a type of heat-recovery called ?heatpipe?.

The usage possibilities of mobile platforms and smart phones are increasing rapidly as they provide support for better processors, sensors and communications capabilities. This has for many companies resulted in an increased interest to explore the possibilities of mobile platforms and how they can be integrated in various business areas. As the usage of mobile platforms in industrial applications is a new area, it is difficult for companies to estimate their potential, and what contributions the different platforms can give.This master thesis investigates the possibilities and limitations for the consultant firm Combitech when integrating mobile platforms and handheld devices in industrial applications. This is accomplished through a comparison between the platforms and by considering the possible areas of use for the mobile platforms based on experiences from companies and research in the area.For a company with the intent to deliver services that use mobile platforms, it is important to be able to combine expertise and resources to effectively attract customers. The mobile platforms will, if applied right, give great possibilities in industrial applications as a cost-effective alternative for both hardware and software solutions for businesses, which provides an opportunity to sell services to both established and new clients.

The usage possibilities of mobile platforms and smart phones are increasing rapidly as they provide support for better processors, sensors and communications capabilities. This has for many companies resulted in an increased interest to explore the possibilities of mobile platforms and how they can be integrated in various business areas. As the usage of mobile platforms in industrial applications is a new area, it is difficult for companies to estimate their potential, and what contributions the different platforms can give.This master thesis investigates the possibilities and limitations for the consultant firm Combitech when integrating mobile platforms and handheld devices in industrial applications. This is accomplished through a comparison between the platforms and by considering the possible areas of use for the mobile platforms based on experiences from companies and research in the area.For a company with the intent to deliver services that use mobile platforms, it is important to be able to combine expertise and resources to effectively attract customers. The mobile platforms will, if applied right, give great possibilities in industrial applications as a cost-effective alternative for both hardware and software solutions for businesses, which provides an opportunity to sell services to both established and new clients.

The purpose of this thesis was to investigate the need of working instructions in Derome Träteknik ?s industrial house-building factories. Furthermore we wanted to determine an appropriate way for developing working instructions adapted to the conditions in a certain production environment. In the construction industry today prefabricated building elements are frequently used. With this come repetitive work tasks that need to be carefully planned.

I want to look at the possibilities to start selling hot water from a small district heating plant with bioenergy. My reason for doing this project is to look at a new business opportunity for our farm. Our company have less work during the winter time compared to the spring and this project will give us more work during the winter. I also want to take as much material as possible for heating from our farm in order to increase the value of the products from the farm. The project is in a village near us, where we should support a school, a churh, a home for the aged, a kindergarten and a parish hall with heat. In my work I have compared two different alternatives with each other. The first alternative is to put a central heater in one of the buildings, the home for the aged, in which we will burn oat.

The purpose of this study is to explain the development of the first higher technical education in Trollhättan, with the added perspective of Trollhättans strong industrial profile as a city. The interesting thing being that the city did not try to first and foremost get a regular higher education, but a technical higher education instead. The study describes the political twists and turns the question took from its most early stage in the year 1940 and how the city's industrial profile did indeed have an impact on the development of the first higher technical education. Especially because there was a need for educated engineers in the city, as well as the country of Sweden in large during this time. The study also tries to explain the problems related to such a development, primarily by describing the lack of sufficient housing for schools during the 1950's, this meant that the higher regular school and the higher technical school had to cooperate in finding said housing.

This report has a dual focus. The first goal was to increase the knowledge of how the use of electricity in a residential building is distributed. Electricity in residential buildings is used for lighting in common areas, elevators, pumps and many other appliances. The electricity used for these different parts is to a great extent unknown. A few studies have been carried out and the result of these is referred to in this report.By means of measurements and approximations the use of electricity for various appliances became known.

This report has a dual focus. The first goal was to increase the knowledge of how the use of electricity in a residential building is distributed. Electricity in residential buildings is used for lighting in common areas, elevators, pumps and many other appliances. The electricity used for these different parts is to a great extent unknown. A few studies have been carried out and the result of these is referred to in this report.By means of measurements and approximations the use of electricity for various appliances became known.

The main purpose of this thesis has been to address the problem connected with conservation ofspecific objects in historic buildings that have a protected building status. The immaterial demandsand environmental concerns of a place of cultural significance are discussed as opposed to the welladaptedsetting of a museum, with regard to long-term preservation. In an authentic interior of acertain era, large-scale individual treatments of the objects that define it and regulations forconservation-related reasons, may not be considered a worth-while effort, as it is often the integrityof the environment as a whole that has been declared as significant. To investigate the relationshipbetween object and its context, a case study has been conducted by examination of the propertycalled ?Curmans villor?, located in the seaside community called Lysekil.

Abstract?Understand the customers value in use ? A multiple case study of three industrial companies? or ?Förstå kundens bruksvärde ? En multipel fallstudie av tre industriella företag? brings out the problem that it is easy to assume, what the value is for the customer.The questions asked for this thesis are:? How does the companies in focus, gather information about what effects the customers value in use?? How do the companies use this information in their business?The purpose is to examine how some industrial companies gather information about the customer?s value in use, on the bases from the five activities from Porter and how they can use this information.Three semi structured interviews were made for this investigation, with representatives from Atlas Copco Rock Drills, IL Recycling and Johnson Pump.The conclusions are that to gather information about the customers value in use, the company must work close with the customer. This information helps the company to improve their products, services and their relationships..