Swedish biogas is currently produced mainly by anaerobic digestion of sewage sludgeat sewage treatment plants, landfills and anaerobic digestion of household or industrialwaste. Also cattle ma-nure from farms can be used to produce biogas. Upgradingbiogas represents an increase in methane concentration from about 65 % to about 97%. In addition, particles and contaminants must be sepa-rated from the upgradedbiogas. There are various methods for upgrading and this report compares sixdifferent methods with respect to environment and economy: water scrubber,Biosling, cryo technology, chemical absorption, Pressure Swing Adsorption (PSA) andmembrane separation.According to the used ORWARE model, chemical adsorption with amine has the leastenvironmen-tal impact (methane emissions) and the lowest costs.

The demand för Swedish pork meat is increasing every day. This leads to agricultural farming having to develop as an industry, with larger and more rationalised units to make the farming more effective and to raise the financial profit. The consequence of this is that it affects the animals when their surroundings become more industrial. The pig´s natural behaviour becomes restricted by the limitations of the facilities, which leads to them becoming understimulated. Helena Kummel, a teacher at Munkagård upper secondary school and also an educated animal inspector has developed a prototype that could possibly replace the pig´s natural rooting behaviour inside the barn. The porpuse of this report is to study "bökboxen" in the gilts´actual living enviroment, through qualitative- and quantitative analysis.

Detta examensarbete har genomförts på avdelningen Mätteknik & Teknologi (REI) på Siemens Industrial Turbomachinery AB i Finspång. Målet med arbetet var att konstruera och designa en ny utrustning för kalibrering av brännarna till gasturbinen SGT-750. Dagens befintliga utrustning har ett stort kalibreringsbehov och genom att ersätta komponenter i dagens utrustning med nya som är mer optimala för kalibreringen fås bättre mätnoggrannhet, beräkningarna blir enklare och kalibreringsbehovet av utrustningen blir mindre. Därmed skapas en tidsvinst för företaget. Idag används mätsträckor i utrustningen och de kommer i den framtagna utrustningen att ersättas av en massflödesmätare av typ Coriolis.På grund av att examensarbetet är ett delprojekt i ett större projekt som har försenats, mot förväntad tidsplan, så har examensarbetets huvudsakliga innehåll ändrats under projekttiden.

This thesis is carried out at Portsystem 2000 AB who manufactures and markets industrial doors and docking systems. The background to this thesis is that the company?s management considers that their follow-up process of cost accounts is not fully functioning.The aim with this report is to investigate and describe the present procedure of the follow-up process concerning the time of operations and come up with suggestions for improvements. This thesis is performed within the range of the following areas: Information systems, quality, processes and cost calculation. The main method we used were semi structured interviews with a fairly opened framework.

What traces of their actions are the Building Corporations in Sweden leaving in their archives and are they followingsome archival policies? This thesis is trying to answer that question. For that reason 25 archives fromSwedish Building Corporations have been investigated concerning their size, contents and age. Furthermore apoll performed by the Swedish National Archives in cooperation with the Swedish Employers? Confederationhas been analyzed.

The Production Manager at Atlas Copco AB Craelius wants to adopt a lean approach to become more competitive. This thesis is an exploratory study of the subject and what it means for the business activity and its implementation process.The objective is to provide a basic understanding of lean to the company, and what this means for Atlas Copco AB Craelius. The report describes the industrial revolution in brief. This is because the company itself must understand where certain ways of looking at production management is derived from. Furthermore, it provides an understanding of Lean's origins.

In 1999 the childbearing increased, which in combination with the closure of a number ofpreschools led to the shortage and reduced capacity in available places for youngchildren. The lack of places in preschools has led us to try to find a solution to theproblem and in order to solve the problem we have interviewed personnel of preschoolsin Halmstad. The persons we met were asked to list advantages and disadvantages oftheir preschool and also to come up with innovative solutions and new ideas of how todevelop a satisfactory preschool. This was the basis for us when we drew our drawingsand our main objective was to find a new template for the development of pre-fabricatedpreschools.When drawing a new and modern preschool a number of considerations have to be made,first of all the main objective for the children is play and playtime, a second objective issound reduction and laws about sound reduction. Another consideration is how toconstruct the building and which method to be used, for instance should industrialtechniques be considered and pros and cons be listed.The main disappointment amongst the preschool personnel was that they had noinfluence in the planning stage of the new development of the preschool.

In this study we examine trade patterns between Turkey and 13 member states of the European Union and how these have developed over the time period of 1983 ? 2006. To represent the industrial and agricultural goods included in the study we look at the United Nations Standard International Trade Classification (SITC). Following, we investigate internal differences in the EU by selecting four countries each to represent the Northern and Southern countries of the EU. Internal differences were studied in relation to the amount of trade occurring between Turkey and the Northern and Southern countries.

In the beginning of the 1990?s ratite breeding for meat production was introduced in many European countries, including Sweden. The knowledge of ostrich farming and diseases of ratites is increasing internationally but is still often limited among veterinarians. This report consists of a literature study and a summary of pathology findings from ratites submitted for necropsy to the National Veterinary Institute (SVA) in Uppsala, during 1995 to 2001. The purpose is to give a general introduction to ostrich and ratite breeding and to give an overview of the most common diseases. The necropsy data from 1995 to 2001, indicate that many of the diseases are management related rather than caused by infectious agents. Due to cold climate ostrich breeders in Sweden need to supply well designed buildings and good care of the animal.

This examination paper is a lead in the educational program Industrial Management at Jönköping University. The paper itself contains an analysis of the warehouse organisation and its efficiency at the furniture company Voice AB in Torsvik, just south of Jönköping, Sweden. The report also contains propositions to raise the level of efficiency in the company warehouse and warehouse management.In the investigation of the warehouse a number of possible improvements were found. Examples are lack of a system for labelling shelves and racks, lack of an efficient location system and development possibilities in work routines. For the empirical investigation both qualitative and quantitative methods ware used.

The aim of the study is to get a better understanding of leader's reactions in a crisis situation, and to examine whether locus of control and coping strategies can be related to leaders need for social support. The role of a leader in a crisis situation is complex and includes several aspects which must be illustrated to understand the leader's situation. Four leaders have participated in the study. The methods that have been used are questionnaires for measuring locus of control and coping and semi-structured interviews. The results show that search for social support cannot be seen as an outcome of a specific locus of control or coping strategy.

The aim of this thesis is to establish a ?förvaltningsplans? template to Fastighetskontoret in Vasteras city. Further general information about the mission was given at our first meeting with Rolf Haraldsson, who happened to be our mentor and works at Fastighetskontoret in Vasteras city.We agreed that using the software Excel was the most appropriate way to establish the template, because Fastighetskontoret also make use of Excel in their internal system, and also because Excel has a more friendly user interface and it is more easier to use compared to other software that have complex templates.One of the first things we did was to get in contact with different fastighetskontors around Sweden so that we could either take part of their ?förvaltningsplaner? or get referred to other material that could have been used. But this turned out to be an unsuccessful strategy.

The town of Karlstad has a long term project called Vision 100 000 which aim is to increase the population towards 100 000 inhabitants. This will of course put a strain for the town?s energy distribution grid. This is a work about trying to predict the grids power usage would be for the next five years if the city building plan is finalized. Those predictions are mainly going to be done through calculations with a database program called Facilplus and by checking the measured history of power usage per hour on certain selected customers by the program CustCom.

Denna studie utreder alternativ för hur en testutrustning för generatorskydd skulle kunna konstrueras. Den är utförd på uppdrag av Siemens Industrial Turbomachinery, SIT. Målet är att underlätta konfigureringen av generatorskyddet för de konstruktörer som arbetar på SIT samt förebygga fel i provningsfasen som försenar färdigställandet av de turbinanläggningar i vilka generatorskydden skall användas. Testutrustningen behöver vara billig vilket medfört att fokus har legat på att undersöka möjligheten för konstruktion av en egen lösning av signalgenereringen, som är den del av utrustningen som kostar mest.Konstruktionen är tänkt att fungera genom användandet av ett styrsystem vars analoga utsignaler förstärks till nivåer passande generatorskyddet. Spänningssignalerna transformeras upp med hjälp av en transformator och strömsignalerna förstärks genom användande av en förstärkarkrets innehållandes transistorer och en operationsförstärkare.Kostnaden för konstruktionen är låg jämfört med att köpa in en utrustning motsvarande det reläprovningsinstrument som används i provningsfasen.

Building Automation Systems in commercial buildings are often designed and installed by different contractors, using equipment and components from different manufacturers. The lack of an accepted communication standard has resulted in a few different standards. Many manufacturers of building automation systems only support one, a few or none of these standards, while developing proprietary system solutions. Regin, who develop such equipment, are planning to adopt an open communication protocol specially designed for building automation - BACnet. As a step in that direction this thesis was announced with the purpose to investigate the possibility to implement BACnet in one of their products and to gain more knowledge of the BACnet protocol.