Detta examensarbete är det avlutande momentet på civilingenjörsutbildningen Ergonomisk design och produktion vid Luleå tekniska universitet. Målet med projektet är att designa en helt ny skotermodell exteriört. Tyngdpunkten i projektet är utseendet men även andra aspekter behandlas, så som ergonomi, materialval och tekniska lösningar. En Internetbaserad enkätundersökning, marknadsundersökning samt systematisk problembehandling ligger till grund för designen av fyra grundkoncept. Dessa undersöks genom strukturerat konceptval samt samråd med uppdragsgivaren.

This thesis is basically a design project aimed to find a safe and reliable automatic safety device, which is designed to be suitable for highly automated industrial situations. This device fits with ABB / Jokab Safety?s fence systems. These are built up around machines to create safety distances. The automatic protection device assist the operator in situations when loading or going in and out of the danger zone.

The Swedish building and property management sector are responsible for about 30 % of the total energy use. In order to take environmental consideration, different environmental assessment tools and standards are used. Miljo?byggnad, Svanen, FEBY12 and PHI are some of these. There has been increased interest to certify buildings and therefore it is of interest to evaluate the assessment of the energy field to see if relevant energy aspects are assessed.

In this thesis, it is investigated if it is possible to create a common factor of the work tasks done by an air traffic controller, which then can measure workload. This will lead to the development of a tool to measure workload at small airports. In the research project a questionnaire is created to measure the different tasks an air traffic controller has. The same questionnaire will also measure the number of environmental factors that exists around the air traffic controller. To measure the validity of the questionnaire, the authors are using NASA-TLX.

Syfte: Denna studies syfte är att beskriva förtroendets roll i långsiktiga affärsrelationer mellan företag inom automationsindustribranschen. Betydelsen av ett starkare/svagare förtroende beskrivs och detta görs utifrån automationsföretagens perspektiv.Metod: Teorin grundar sig främst på Morgan och Hunts (1994) trust & commitment theory, där förtroende och relationsåtagande beskrivs som förutsättningar för långsiktiga b2b relationer. För att kunna testa hypoteserna, samt besvara syftet genomfördes en kvantitativ undersökning i form av en enkätundersökning med 251 deltagande företagskontakter.Resultat: Förtroende och relationsåtagande är förutsättningar för långsiktiga B2B relationer, vilket är en fördel för automationsföretag. En viss nivå av osäkerhet behövs för att förtroende ska kunna existera i långsiktiga affärsrelationer mellan automationsföretag.Nyckelord: Förtroende, Relationsåtagande, Osäkerhet, Långsiktiga affärsrelationer, Business-to-business..

I denna rapport beskrivs uppfo?randet av en fysisk modell av ett va?xelstro?msystem baserad pa? IEEE 14-bus referensmodell. Projektets resultat, en prototyp monterad pa? en tavla, a?mnar tja?na ett pedagogiskt syfte fo?r att kunna anva?ndas fo?r studiea?ndama?l och har konstruerats efter o?nskema?l fra?n avdelningen Industrial Information and Control Systems (ICS) pa? KTH. Arbetet har framskridit genom att identifiera efterstra?vade modellfunktioner, samt genom att va?lja adekvata komponenter utifra?n bl.a.

Sweden's contribution to the world today is not labor-intensive industry, it is high technology and know-how. Many of the rules concerning employment security for the workers derived from the industrial era and have been to some extent modified by hand. This paper focuses on the discrepancy between the purpose of the priority rules in Swedish law and how it works in the reality. My opinion is that due to the development of the labor market, a powerful revision of priority rules is needed. In addition to today's job market is knowledge-intensive I point in the paper at a number of factors that contributed to the loosening of the priority rules. Examples of these are the increased incidence of temporary staffing, more open markets and more multinational companies, political will to disadvantaged groups in the labor market should be prepared job and gender issues.

This thesis deals with the possibilities of installing solar panels on a property, the building is owned by Kornhillschurch and called Kornhill. The owners of the property wanted to learn more about potentials for installation of solar panels on the property, therefore we described different types of solar cells and solar cells essential function to generate electricity in the report. Different factors that are limiting the generated energy are mentioned.An investigation of the property?s potential has been made in order to consider different designs. When sites that were considered suitable for solar cells were selected, different design options were made, one for each site.

Abstract New methods, techniques and tools for the building industry are constantly being developed and improved and launched on the market. The problem in the building industry development is not that the products are not good enough. The problem is instead that the existing construction companies do not choose to use these innovations, instead they continue to employ the technologies they already possess and master. This leads to the fact that the construction industry is, in the public eye, beeing seen as a conservative industry. AquaVilla is a company that basically produces houseboats.

The work in project has been around since humans began to hunt in groups, building bridges or building of the Great Wall of China. In 1960- and 70´s, the word project got their value it has today. A project means a work done during a decided time, with decided economy and non-recurring nature (Jansson and Ljung 2004). The projects had a general analytical model. It was used for all projects the organization engaged.

The aim of this study has been to examine the role of control mechanisms when it comes to building relationships in a small business network. In order to reach this goal, we have performed a case study of a Swedish supplier of machines to the engineering industry, which acts as the exclusive representative of a foreign manufacturer on the Swedish market. Main results: A number of control mechanisms, both formal and informal, could be identified in the network. Their specific use, as well as relative importance differ between different actors in the network. In general, the importance of formal control mechanisms decreases as the relationship evolves over time and the importance of informal ones, mainly trust, increases in a corresponding manner..

In some coastal areas in Sweden water shortage sometimes appears because the withdrawal of groundwater is greater than the groundwater recharge. It creates a situation where the available groundwater is insufficient to support residents and businesses with drinking water. The high withdrawal of groundwater also creates a risk for saltwater intrusion to drinking water wells. The problem most commonly occurs during the summer when the groundwater recharge is low, but the population is high, due to tourism and summer residents.The purpose of this study was to investigate how local water supply in areas affected by water shortage can be solved as sustainable as possible. The work was divided into three parts where the first part comprised of a literature review on water systems in which four different options were investigated: artificial groundwater recharge, rainwater harvesting, desalination and water reuse.

Techniques used in the building of a number of ships from the Mediterranean will be presented in this paper. The two techniques thnat will be discussed are shell-based technique and skeleton-basedtechnique. An attempt to clearify and delineate the transition between these two techniques will be made. The possible reasons for transition will then be described and discussed. The development ofthe techniques is going to be identified with help from four wrecks by analyzing their edge joineriesand this facts will be used as a basis for a chronological presentation.

Benchmarking is an established method of working which is often used in order to develop the quality of the organization. However, almost 70% of the organizations with benchmarking fail due to the lack of planning and structuring of the benchmarking exercise. Maintenance sections in the paper and pulp industry are one of those who have decided to conduct benchmarking. Therefore, the purpose of this study is to gain knowledge of how the maintenance sections in the paper and pulp industry deliberately structure and plan to use benchmarking as a driving force for quality development in the maintenance sections.The study is a hermeneutic case study. Telephone interviews and document analysis have been used as data acquisition methods.The results show that there is a lack of both planning and structuring in the benchmarking process, and lack of management commitment for quality improvements within industrial maintenance.

Denna rapport utgör civilingenjörsexamensarbete på institutionen för maskinkonstruktion påKungliga Tekniska Högskolan. Arbetet har utförts år 2009 på Siemens IndustrialTurbomachinery AB (SIT AB) i Finspång. Syftet med arbetet är att minska läckaget av kylluftvid ledskena 2 på SGT-800, med hänsyn tagen till kostnad och verkningsgrad. Arbetet utgickfrån en bakgrundstudie där problemet fastställdes och en kravspecifikation sammanställdes.Effekter och kostnader av kylluftsreduceringen låg till grund för beräkningarna. Femgrundkoncept genererades med utgångspunkt från kravspecifikationerna.