The anatomy and physiology of reptiles and mammals are in many ways different, and will therefore possibly complicate anesthetic administration. Lizards are ectothermic and one should keep in mind that a decrease in the lizard?s environmental temperature may result in reductions in anesthetic metabolism. Respiratory depression is a profound problem because lizards lack a diaphragm, making inhalation and expiration completely active processes. This, in combination with cardiac shunting and breath holding makes the effects of anesthesia unpredictable.

This study was a degree in Master of Science in agriculture with specialization in animal science for the Department of animal nutrition and management at SLU. The subject was created by AS-Faktor, a small company for science and development within the company Lantmännen AB. It was a test of the effect of SPC (Special Processed Cereals) on Induction of the endogenous protein AF (an antisecretory factor) in plasma and intestinal lumen in broilers. Previous results have shown positive effects on different intestinal diseases in pigs, horses, dogs as well as in humans. Beside the Induction we also studied the effects on results in a conventional slaughter chicken production, including the ability of SPC to compete with or be affected by the coccidiostat, Salinomax.When diarrhoea occurs, it's because there is an imbalance between the secretion and the absorption and it can be caused by for example toxins.

To be able to feel a sense of belonging, people need to have the possibility to take part of the information from the society. Hearing-impaired don?t have the same possibility as hearing people when they want to take part of the information, therefore they don?t get the same benefit. This contributes to a feeling of not belonging and a sense of limitation in different social occasions. Therefore the society needs to be accessible to everyone regardless disability.

This study?s purpose is to identify and analyse the risk associated with outsourcing of services within real estate management. Completing this study I have used the method Induction with qualitative personal interviews. A number of risks are identified, however, the advantages of outsourcing generally dominate over disadvantages. The companies studied are generally able to handle the risks associated with outsourcing..

Handling of animals during anaesthesia is an important field in the profession as a veterinary nurse and in which intubation is an essential part. Hence, adequate knowledge is necessary for the welfare of the animal. The objective of this literature study was to make it useful and trustworthy for veterinary nurses. It is intended to describe and summarize existing scientificity with its benefits and disadvantages within the different areas of intubation techniques and alternative methods of inhalation anaesthetic supplementation for general anaesthesia in rabbits. Endotracheal intubation in rabbits can be complicated and technically demanding due to the anatomy of the oropharynx including the narrowness of this structure, a relatively large tongue, large incisors and a limited mobility of the temperomandibular joint. The obstructed visualization of larynx and the rabbit?s tendency to develop laryngospasm contributes to the difficulty of intubation. Rabbits are susceptible to tracheal injury and multiple intubation attempts can cause tracheal lesions due to repeated damage to the tracheal mucous membrane, although damage can occur after a single intubation attempt as well. An ETT (endotracheal tube) with or without a cuff can be used during orotracheal intubation in rabbits.

St. John?s wort extract is composed of a large number of components, about 150, but the most studied and interesting substance are hyperforin and hypericin. The herb is very popular and it is known for its pharmacological efficacy in numerous disorders. It is used for treatment of mild to moderated depression as an alternative to synthetic antidepressants.

This technical report describes the master thesis in material engineering called ?Testing of surfaced hardened materials conceivable for gears and shafts?. The work extents 20 academic points. Land systems Hägglunds manufactures and sells different kinds of combat vehicles and terrain vehicles. Since the demands for bigger and stronger vehicles increases all the time, so are the demands on shafts, gears and other transmission details.

This report tested the possibility of using Induction as a mean for transferring data and power so that it can be implemented as a communication medium between a terminal and measuring head mounted in a measuring frame. This would eliminate the need for the cable bunches that are used today. For testing, signal generators were used to generateFSK-signals and were transferred with the help of inductors to the oscilloscope for signal detection, this to see how the coils used in the tests behaved. Simulations of a PLL were performed to see how good it could handle FSK-demodulation. With the help of a PLL IC and the simulations a working FSK-demodulator could be assembled.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the Induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the Induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the Induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the Induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the Induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the Induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the Induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.