Hylocomium splendens (Glittering wood-moss) is a common species in the Nordic countries and can be found in many different types of boreal forests. It usually forms dense moss carpets on the forest floor. The shoots grow in segments and new segments form annually on the previous years growth. The size of the segments is probably regulated in a high extent by local micro environmental conditions. Previous experiments suggest increased growth of H.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.

The aim of my thesis was to do a Life Cycle Assessment (LCA) of an average thread tap that is manufactured by Dormer Tools AB, and to create a practical model that the company can use in order to study other thread taps from an environmental perspective.The method of LCA is used to investigate the environmental effects of a product during its life cycle. This is a gate-to-grave analysis with focus on steel and thread tap manufacturing, coating procedure, use, waste management and transports. Three common coating types were compared separately. Steel manufacturing answers for the highest energy and raw material consumption under the life cycle of the thread tap. Its emissions contribute to global warming, acidification and eutrophication above others.

This thesis examines the tendering process from the point of view of Swedish building contractors. The purpose with the study is to chart the decision process for the contractors during the tendering process. The study is designed as a survey study. This made it possible to reach a wide base of respondents, not letting such factors as geography being an issue. The survey itself was characterised by a very high response rate compared to other similar studies. The result from this study shows that former experience from similar projects, current workload and the clients economic condition are very important factors for both whether or not the contractor will bid for a project as well as the cost estimation and tendering price. Former experience from similar projects is also an important factor for the determination of the indirect costs.

I Sverige pa?gick under 2013 efterbehandlingsa?tga?rder pa? 1789 fo?rorenade omra?den. Det nationella miljo?ma?let ?giftfri miljo?? har av regeringen angetts som det styrande miljo?- ma?let vid efterbehandling. Efterbehandlingen syftar till att minska risken fo?r fo?rore- ningsspridning i mark fra?n avslutade verksamheter som industrier, va?gar med mera.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area. The results show that use of locally installed renewable energy sources can reduce the total climate impact when life cycle perspective is applied.

Objective: The aim of this study was to compare equations used to calculate BMR to values of BMR obtained from measurements in order to determine the most suitable equation to be used on children and adolescents with CF.Design: The participants where children and adolescents with CF. Data was collected from the division of Clinical Nutrition at Uppsala Akademiska Sjukhus. Age, weight, height, BMI, BMR, FFM and FM was recorded from 27 measurements. BMR from the participants collected from the indirect respiratory calorimetry was compared to the results obtained from five equations used to obtain a calculated value of BMR.Results: Tverskayas equation was best correlated with the measured BMR for the whole group. The equation underestimated BMR for the participants with a measured BMR over 1400 kcal/24h and overestimated BMR for participants with a measured BMR under 1400 kcal/24h.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.

Carbon dioxide in the atmosphere contributes to the greenhouse effect, which is essential tolife on our planet. Furthermore, it plays an important part of the photosynthesis andrespiration of the world?s organisms. Since the start of the industrial revolution the amount ofcarbon dioxide in the atmosphere has increased exponentially. The main source is theextensive burning of fossil fuels.

Background and problem: In the last few years the threat against the environment and especially the emissions of carbon dioxide has become increasingly debated. The government have set up a goal to lower the emissions of carbon dioxide with 40 percent until 2020 compared to the level in 1990. The emissions in the transportation sector have, in contrast to the total emissions, increased since 1990 and will continue to increase unless powerful control measures are implemented. The lorry centres have to use strategies to answer to these external threats which lead us to the two questions of this thesis: - What methods do the lorry centres use actively and which do they consider as the most important methods for fuel saving? - Are there any differences which methods small, medium and large centres considers as important? Purpose: The main purpose of this thesis is to examine which methods lorry centres use actively and which they consider as important for fuel saving.

By using steady-state measurements for predicting emissions under a dynamic drive cycle wouldsave a lot of time and money for the exhaust aftertreatment specialists at Volvo cars. The idea forthis thesis has been to investigate if statistical regression models can be used with good accuracy.Questions included are for example if common operating variables such as engine speed, air-fuelratio etc. is sufficient to predict engine-out emissions over the engine operating range with goodaccuracy. Focus was set on the modelling of warm engine, but also the more complex engineheat-up phase was investigated since it is a great contributor to total emissions. While NOxcouldnot be measured because of malfunctioning measurement equipment, only HC, CO andtemperature at inlet of first catalytic converter has been modelled.

Sex equality law within the European Union is well developed and has since the Rome Treaty, given rise to several directives and other judicial acts on this matter of community law. The concepts of direct and indirect discrimination emerge from the general principles of Equal pay and Equal treatment and have been codified and amended several times until present.The lasts years, authors within the field of Equality Law has been pointing out that there is a common desire for simplification of discrimination law in Europe. The question has arisen whether this simplification could be implemented trough the introduction of a general justification defence for direct sex discrimination.The concept of direct sex discrimination - when a person of one gender is treated less favourably, on the grounds of gender, than a person of the other gender would be treated in similar circumstances - leaves no possibilities for such justification today. Indirect sex discrimination ? which arises from the equal application of neutral rules that shows an adverse impact on one group ? can be justified if the rule answers to true requirements of the job.Does the proposition that direct discrimination should be justified find support in the inconsistency of the present legislation? This paper will examine this and other questions concerning the wish for a general justification defence through studies of case law from the European Court of Justice as well as differing opinions from authors within the field of equality law..

Intresset för biobränsleproducerad energi har ökat i takt med att kunderna blivit mer miljömedvetna. På grund av detta har efterfrågan på briketter ökat samtidigt som träindustrin har haft det svårt i en sviktande konjunktur. Därför har ett examensarbete utförts i samarbete med E.ON Värme Sverige AB där undersökningar på bränslebyte i pannor avsedda för torra bränslen till fuktigare, stamvedflis har utfört.För denna undersökning har begränsningar införts på övre och undre effekt i form av uppehållstid och slutförbränningstemperatur. Intervallen är enbart beräknade på stamvedflis med 30 och 40 % fukthalt.Undersökning visar att det går bra att elda stamvedsflis i briketteldade pannor utan att emissionerna ökar så pass mycket att villkoren för anläggningarna överskrids om lasten hålls inom vissa intervall. Det möjliga effektintervallet ökar med minskad fukthalt på bränslet.Undersökningen har visat att det är bränslets kvalitet som är den mest begränsande faktorn..

The goal with this examination thesis is to investigate the difference in carbon dioxide emissions between a building with a wooden versus concrete carcassing from a life cycle perspective. The huge amounts of carbon dioxide released into air from human activities must be reduced to prevent serious consequences. A way to limit this issue is through performing a comparative study where the result shows which of two products with the same function has the lowest emission of carbon dioxide, whereof the product with the lowest carbon dioxide pollution can be chosen.To be able to perform a study like this an object has been chosen and studies about life cycle analyses have been done. The rental square meter, the thermal conductivity value, the energy requirements and the placement of the building has been set equal in both framework types. There were solely dissimilarities of the two buildings taken into account when this comparison study was performed.The result of the study is that a building constructed with a wooden carcassing has the lowest amount of carbon dioxide emissions.

To achieve the requirements to decrease emissions of greenhouse gases by 20 % by 2020, Swedenneeds to increase its use of bioenergy. In doing so it seems natural that those who already haveaccess to large amounts of biofuels in the form of by-products such as straw, wood chips anddigestible materials take advantage of these assets locally. By combining production of heat withpower production at the farm it may be possible to not only reduce the direct use of fossil fuel forheating but also reduce energy costs.The purpose was to simulate different cases of using a small scale biofueled combined heat andpower plant for farm-based systems. A MatLab-model was developed and used to draw conclusionsabout the costs for production of heat and electricity with different conversion technologies.The model uses climate data to simulate the variations in heat energy demand on a day-to-day basis.The given heat demand is the base of the simulation and from this the possible electric output iscalculated. This study has focused on the impact of the following properties: electric-, heat- andtotal efficiency, fuel, fuel price and specific fuel requirements.