Sökresultat:
4905 Uppsatser om Increased ink amount and printing speed - Sida 59 av 327
Sorterar skotaren bort det timmer som skördaren har tillrett? :
The efficiency of the harvesters work is more often reviewed, than the work of the forwarders. In a local Stora Enso office the differences between the harvesters reported volume of timber, and the actual volume delivered to the industry had been noticed. Therefore, the decision was made to do a review on the forwarders work.
The review was conducted together with a worker from Vmf Qbera, who is working daily with wood measurement, in order to get a valid evaluation of the logs. Eight sites were included in the survey, and on each site 50 logs were marked. Approximately one third of the marked logs were pulpwood, and the remaining logs marked were timber.
Irrigation scheduling for efficient water use in dry climates
In this report the importance of irrigation scheduling in dry climate is shown, how it can save water and energy; how this method can improve crop yield by supplying the right amount of water at the right time. It is shown how irrigation scheduling and irri-gation technology together increase the irrigation efficiency..
Vem gör vad - En fallstudie om federativ samverkan
This study aims to investigate how federations manage to balance the economies of scale through collaboration and autonomy. This is done through a case study on Länsförsäkringar. The lack of modern research on federations makes the federative structure an interesting field of study. Previous research has shown a general perception that an increased pressure on efficiency and economies of scale creates a stronger common unit that eventually creates an imbalance in the federation. It is therefore interesting to look at the balance, which exists between the member units and the common unit of a federation.
The Toyota Production System (TPS) : ett verktyg för att skapa effektiv och lönsam produktion
Many companies are currently working to optimize and streamline their processes and production lines to achieve higher profitability. In increasingly competitive markets, companies are working to find solutions to increase the value of their production with such a small use of resources as possible.
A tool used to accomplish this is the Lean management system. Lean comes from the production system that Toyota has been developing since the early 1900's, The Toyota Production System (TPS). The Lean philosophy helps companies, by working towards continuous improvement in its operations, to achieve higher customer satisfaction, more efficient production and ultimately higher profitability.
Many companies are working to implement Lean in their organization. But there are many who fail to implement a complete change towards Lean.
Visualization of Particle In Cell Simulations
A numerical simulation case involving space plasma and the evolution of instabilities that generates very fast electrons, i.e. approximately at half of the speed of light, is used as a test bed for scientific visualisation techniques. A visualisation system was developed to provide interactive real-time animation and visualisation of the simulation results. The work focuses on two themes and the integration of them. The first theme is the storage and management of the large data sets produced.
Ansvarsförhållande kring förebyggande materielvård på förbandsnivå inom armén
The change in course recently taken by the Swedish Armed Forces results in an increased use of equipment, and thereby increased requirements of preventive maintenance. This paper aims to examine the current responsibilities for preventive maintenance in an army unit. The intended effect of this examination is to disclose possible flaws, and to help make routines for preventive maintenance more effective.The questions asked in this paper are;Who, in an army unit, is responsible for the routine maintenance?When is this responsibility valid?What demands does the technical service have on responsibilities for the routine maintenance?How are these demands met?How ought to be responsible for the routine maintenance?To answer these questions the author has chosen to use a descriptive method to show the current facts. A theorizing method is chosen to, from described facts, clarify the demands of the technical service on routine maintenance.
Modellering, identifikation och reglering av en quadcopter
SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.
Bangenerering för industrirobot med 6 frihetsgrader
This thesis studies path generation for industrial robots of six degrees of freedom. A path is defined by connection of simple geometrical objects like arcs and straight lines. About each point at which the objects connect, a region, henceforth called a zone, is defined in which deviation from the defined path is permitted. The zone allows the robot to follow the path at a constant speed, but the acceleration needed may vary. Some means of calculating the zone path as to make the acceleration continuous will be presented.
Från Policy Till Praktik -en studie om textilföretags uppfattningar om utmaningar vid implementering av CSR-policies
From policy to practice - a study of textile companies view about challenges with implementing CSR policies examine the textile companies awareness of which challenges there are with the implementation of codes of conduct in a global supply chain, as well as to analyze how the companies deal with the challenges. With increased globalization many companies have chosen to outsource entire or parts of the production in various developing and newly industrialized countries. However, the working conditions in these countries do not always fulfill the labor standards that are defined in various conventions. The society began demanding companies to take social responsibility. The social responsibility goes under the term Corporate social responsibility (CSR).
Spiritual and Existential needs in palliative care
Background: Previous research has shown that the understanding and knowledge about the spiritual needs is not given high priority among nursing staff. During the latest years the body and its functions has controlled the healthcare and the spiritual needs has been placed in the background. All humans have spiritual needs that must be satisfied irrespective of religious background. Aim: The aim of this study was to in a caring perspective illustrate patients? spiritual and existential needs in palliative care.
Fysisk och numerisk modellering av flödesmönster i utjämningsmagasin med öar
The major aim of the thesis is to describe the networks, relations and marketing of some university libraries and their customers in the year 2000. I illustrate how these issues interact and whether they have changed due to the recent development of technology and if so, how. The thesis is based on interviews with two directors of libraries and two librarians at two different libraries. A small survey with 16 questionnaires has also been performed in order to get a more general view on librarians' opinions in these questions. The thesis mainly shows that the networks in which the respondents take part primarily exist in the library sphere and towards the universities.
Stormskador i lärk och gran : en jämförelse efter stormen Gudrun
The storm Gudrun January 8-9 2005 felled about 70 millions cubic metres forest in southern Sweden. The majority of the wind damaged forest was spruce (Picea abies). In order to decrease the risk of wind damages in the future other trees species are of interest for forestry in southern Sweden.
The purpose of this master thesis was to study if larch were more wind tolerant than spruce. The method was to compare larch, Japanese larch (Larix kaempferi Lamb.), European larch (L.
Effektivisering av råvarulager för lagerhållning av ett bredare artikelsortiment
SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.
Trängselskatt En jämförelse av systemet i Göteborg och Stockholm
SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.
Mellan Askim och Angered En kvantitativ undersökning av mediers framställning av individer i socio-ekonomiskt olika boendeområden.
Authors: Fanny Edstam & Joacim KettilTitle: Between Askim and Angered. A quantitative research of media's presentation of individuals in different socio-economic residential areas.Level: Bachelor of JournalismLocation: University of GothenburgLanguage: SwedishNumber of pages: 41Gothenburg is a city that struggles with the issues of segregation. Residential areas like Askim are poorly integrated and areas like Angered have a high amount of immigrated inhabitants. Our hypothesis, with this in mind, is that one can assume media reports from different socio economic residential areas in different ways. The assumed difference in reporting can have aneffect in the readers beliefs that an area can be better or worse than it actually is.