To fit into our society the dogs of today need a good mentality. To investigate their mentalitydifferent behavior tests have been developed. The tests are useful tools in the selection ofbreeding animals as well as for working and companion dogs. To counter the demand for atest that could be suited for all kind of dogs, regardless of their future function, the mentalitytest Beteende- och personlighetsbeskrivning hund (BPH) was developed. BPH consists ofseven subtests that expose dogs to various situations that can be found in everyday life, suchas meeting an unfamiliar person, sudden noises and suddenly appearing objects.The aim of this study was to find out if there are differences in physiological values betweenindividuals, validate the behavior observations during BPH and get aware of how the dogsexperience the situation.

The main purpose of this project was to make a survey of the steam and electricity consumption at Akzo Nobel Functional Chemistry AB and give suggestions of how to minimize them. These three different areas were focused on. First to make a survey of all the most important consumers, second to find the electricity consumption of the air compressors and the amount of waste heat produced from them. The third area was to calculate a model of how much fresh water that is used during a cooling sequence in the water based heating/cooling system of the reactors and give a suggestion of a suitable reuse for this water.The main result is a total survey of the energy consumption in steam and electricity. The survey shows that the second largest group after drying is heating of ventilation which gives big potentials of reducing the total steam consumption if there is a way of being self supporting in ventilation heat.

The purpose of the thesis was to map the hydraulic load on the Knivsta river from stormwater runoff, and build a platform for further studies of pollution loads on the rivers ecosystems. New residential areas are planned to be built in Knivsta municipality and it will have an impact on stormwater flows to Knivsta river. To examine the impact this will have, simulations were made in the area as it stands today and after expansion work. The work includes calculation of flows from the populated areas but also from the catchment area around it consisting of woodlands and fields. Because of expected climatic changes which may affect rainfall, the simulations have been performed with different return periods for rainfall data.

This is a pattern project for textiles, with main purpose to develop and challenge my design process and to experiment with a mix of different printing techniques. The goal of the project was to create three textile individuals as representatives of my experiments, inspired by natural surfaces.The world of fashion have been an inspiration and has been the model for these textiles, with its powerful and playful patterns. With the world of fashion as a model, I also chose to work with the materials habotai silk and silk velvet. The qualities of these materials has also been influential in my design language.The work has been very focused on experiementation and exploration, and resulted in three printed fabrics that I have chosen to call Björkalm, Lindstam and Lavbädd..

Printed and painted wallpaper on a weaved fabric backing was a common way to decorate homes in Sweden during the eighteenth and nineteenth centuries. Not much is written about the craftsmanship in relation to the hanging of these wallpapers and even less about the conservation of the objects. Even so, many wall segments remain in situ and in museums and are more often than not in dire need of conservation such as deacidification and consolidation. These are composite objects, consisting of cellulose materials with different properties along with adhesives and paints. Analysis of the materials is required to ensure safe handling and choice of conservation materials, and to establish a treatment plan which will be executed in several steps. This thesis aims to identify these steps and develop a method for conserving the wall segments with suitable materials, preferably without altering the source material to any significant degree.

Chapter 1 defines the aim of the project and gives a general orientation about ground heat extractors. In chapter 2 physical processes that could be expected to be involved in the heat transport around a ground heat exchanger are discussed. It is shown from a literature study what amount of moisture transport due to thermal gradients there could be expected in a ground heat exchanger. The conclusion is drawn that the moisture gradient (Sr) is of same magnitude as the driving temperature gradient (°C). At the expected amount of increased moisture around the pipes the moisture transport could be considered to have a little effect on the brine temperature.

By our employer Camatec Industriteknik AB have we been given the assignment to continue with the previous work ?Design of strip feeder?. Our goal with this work is to come up with a design basis for a strip feeder.Functionally a strip feeder consists of two rollers which with the aid of the friction between the strip and the coating on the roller create a strip force that pulls the strip through the working progress.Demands on this project:? 10 ? 600 mm in strip width and 0,1-1 mm in strip thickness.? Minimum 30m/min in production speed.? A maximum strip force on 30-40 kN.? The cost of the strip feeder?s components is to be considered of economy and quality.The need of a strip feeder occurs when the coil doesn?t manage to feed or pull the strip before or after a working process. The strip can otherwise be exposed by a permanent yield deformation or a change in the strip material if it?s pulled trough the working process only by the on ? and of-coils.

The aim of this study was to investigate and compare the availability of construction materials affect children's constructions and play. Observations were made when the children were allowed to play and build with very little and much of the material play-doh dough in preschool. The study is aimed at children aged 3 ? 5 years. Interviews were also conducted with educators in departments where the children spent time to give support to this study.The result shows that the children create as many designs of any material amount.

Combustion of fossil fuels is today the dominating source of energy. During combustion,carbon dioxide is formed. The carbon dioxide accumulates in the atmosphere,which raises the global average temperature on earth through the so called greenhouseeffect. The only way to reduce the emissions of carbon dioxide from combustionin a coal fired power plant is through carbon capture and storage (CCS).Post-combustion capture is a technology to separate carbon dioxide from the uegas after the combustion for efficient transport and storage. The steady state operationof coal fired power plants with post combustion capture has already beenthoroughly investigated on a pilot scale, however much work remains to investigatethe plants dynamic operation.

The consumer society exploits the earth?s resources more than the earth itself has capability to produce. This over-consumption causes a mass production of products, which mean that more greenhouse gases are being emitted to the atmosphere. This is one of the reasons why the earth?s temperature is rising, where the result of it is worldwide disasters.

Background: An indisputable right for nurses is to have a safe and secure work environment so they can deliver a high quality care. To bring a clear definition of what threat and violence are, is an important part in the work to prevent threat and violence. One part of the problem is that the experience and understanding of threat and violence can be different from one person to another. Aim: The aim of this quality study was to emphasize Nurses experience of threat and violence at workplace. Method: The method used in this study was qualitative interviews in the sense to bring out the nurses experience.

The purpose of this thesis is to see how small differences in a store can affect the customer behavior. The changes consist of auditory and visual sensory cues. Since many companies today makes a lot of changes in their styling element, but without knowing how it really affects the customer behavior we thought it would be interesting to see by doing an experiment at IKEA. The study is therefore based on a quantitative research method, where theories have been described and from which hypotheses have been derived to test the theories. The experience took place at IKEA during two weeks where 5732 observations were made.The result from the experiment is that the sensory cue sight makes individuals spend more time in the environment but not creating attention.

The Goal with this Master of Science thesis is to expand the possible turbine efficiencymeasurements on an exhaust turbocharger. It was done as a part of the CICERO competencecentre. To feed the turbine with air a special flow rig has been used. Instead of loading theturbine by just restricting the compressor flow a docking system for an electrical dynamometer isdesigned to use the dynamometer as an additional loading source. By using an electricaldynamometer as loading device for the turbine, measurements are not depending on compressorperformance.A large part of the work consists in designing accessories for the dynamometer.

This master thesis is performed at Scania Axles and Gearboxes, a production plant located in Södertälje. Within the plant axles, gearboxes as well as central gears are assembled from components to finished products. All production is conducted on production lines, with a pre-determined rate, which is supplied with components by the material handling department. Since the production quantity and the mix of product variants produced on the production line is customer order-based, the number and type of components needed for production as well as appropriate staffing within the material handling department is difficult to predict. Scania is currently using a number of different resource planning tools for each material handling-department within Axles and Gearboxes to visualize the workload within the departments.

The amount of cargo has since the 1970s increased in Sweden and the road traffic accounts for a large part of the transported volume. In Stockholm County the amount of cargo is calculated to be doubled in size from year 2001 to 2020 which means a greater need for transport is required. Much of these transports are being carried out by haulage companies of varying sizes which acts externally as carriers for their customers. All of this despite a greater awareness, laws and demands regarding environmental performance.The trend shows that the haulage industry in Sweden are moving towards fewer but larger haulage companies, which means that the competition is getting tougher for the smaller haulage companies. Smaller haulage companies and research about their competitive strategies is a neglected part of this industry.