The purpose of this bachelor degree thesis is to analyze technical issues associated with an implementation of a low sloping trash rack with narrow spacing. A hydropower plant in Umea?lven was used as a case study. The basis for the study was a model where trash racks were dimensioned for inclinations between 25 and 45 degrees. Corresponding head loss, durability and water speed through the rack were then determined for each inclination.

The purpose with this study is to find out how much dead wood we can expect us to find in a Russian reference river and compare with studies from Swedish streams. Dead wood are an important structure for the biodiversity in forest streams, studies have shown that population of trout can increase with up to 300 % when the amount of dead wood are increasing from 0 to 8 ? 16 LWD (Large woody debris)/100 m2. Dead wood are also an important structure for the stream character, formations of dams and pools which are important habitats and reproduction areas for salmon and brown trout. The study where taken place in tributaries to the Russian river Varzuga in the North West part of Russia outside Murmansk. Varzuga has low impact of human activity and is considered to be a reference river to rivers in northern Sweden.

In coastal wetlands carbon/organic matter can be stored for long periods of time thanks to, among other things, the presence of water which slows down the decomposition. Because of this, restauration and management of such habitats have the potential to decrease the emission of greenhouse gasses and help mitigate climate. Internationally these environments are called ?blue carbon? ecosystems. In Sweden, alder (Alnus glutinosa and Alnus incanata) covered wetlands along the coast is a nature type that potentially could function as a ?blue carbon? habitat.

Aren?t you tired of never finding stuff? Take a bits as example, do you store these lose in your toolbox or carpenter belt? What if you could have it all accessible and assembled in a tool, always at arm?s reach?Today bits are used together with electric screwdrivers and handheld screwdrivers in a greater spread. For these different types of storage, from pure storage boxes to complex tools with storage built in, exist. The professional craftsmen commonly use some kind of box where the bits can be stored. Even so they tend to store their bits loose in a carpenter belt or toolbox, since they want the speed and accessibility of carpenter belt over the storage box?s tidiness.The project was started in the fall of 2010 and a referents group was early put together to ensure that the developed product became as user-friendly and attractive as possible.

A secondary and a pioneer tree species can with advantage be included in a mixed stand to increase the use of sunlight. Nitrogen-fixing plants have been shown to increase the supply of nitrogen in the soil by, for example, litter fall. This deposition acts as a biological fertilization, which may be used by non-fixing plants. Alder is a nitrogen-fixing, pioneer tree species that loses its nitrogen-rich leaves late in the autumn. The aim of this study was to examine the effect on the total volume of production, when different proportions of nitrogen-fixing Alder were part of spruce stands.

AbstractOur purpose was to understand how social workers experience the possible complexities that working with economical aid can entail. As an example we chose to focus on long-term economical aid work. We aimed to address the question of which factors could affect their work. In a prior study, done by Dellgran & Höjer (2003) the conclusion was drawn  that  the combination of economical aid, healthcare and schools makeup a third of  practical social work in the terms of the proportion of the amount of social workers, but only 8 percent of the research is done in those areas. Other studies (Stranz, 2007) demonstrate that the research that is done on working with economical aid is deficient.

Due to a globalised world business travel is flourishing. This paper examines how middle level executives, travelling a lot in their work at a multi-national company, feel about their travel. It looks for links between business travel and work satisfaction among them. A short presentation of the patterns of business travel and relevant motivational and stress theories is given. Data for the paper is collected using a survey (78 participants) and interviews.

The aim of the present paper was to see why a recommended course of action is not always followed in the way it is supposed to. The paper deals with a new method (SFA-metoden) used by The Social Insurance Agency in working with sick-listed people. Aspects that are elaborated on are local effects of the method at its introduction, case managers work conditions, and control of the implementation of the method. Two different methods of investigation have been employed. On the one hand, previous reports on the method have been analysed, and, on the other hand, two focus groups interviews, one consisting of case managers´ working with the method, and one constituted by their supervisors have been carried out.The results have been analysed in accordance with, on the one hand, the theory of street level bureaucrats and, on the other hand, certain concepts applied in the new institutionalism.

Blast furnace is the heart of every steel plant. Steel production is based on the blast furnace process, as it is where the iron is extracted from the iron ore and turned into liquid iron, which will subsequently be used to make liquid steel. Therefore, without hot iron, steel can not be produced. Blast furnaces in this process are supplied among others with pulverized coal. Raw coal should be prepared for the blast furnaces in the form of fine coal powder.

In this project the focus has been on the system for recombination at Oskarshamn 2. The recombining systems have on several occasions switched paths due to low pressure before the last ejector that?s feeding the recombiner. Of the mentioned reason, events and several measuring points have been analyzed in this report since the installation of the recombining systems.In order to prove theories and demonstrate what may be the cause of this problem, we used heat balance calculations by the program Probera. Using the program, we can demonstrate that the catalytic process does not reach the desired temperature with the amount of combustible substance.

The milk production has developed rapidly the last years. The milk production per cow is increasing and the production units are larger with an increasing number of animals and a decreasing number of workers. Many milk producers invest in automatic milking systems (AM) to meet this change. In these systems the cows can voluntary decide milking frequency and usually the milking frequency are higher than two times per day. But how does the milking frequency effect the composition of the milk? The aim of the present study was to study the effect of milking frequency on the milk composition and the milk fat quality.

Chemical substances are spread diffusely and uncontrollably as a result of the increased consumption of goods. REVAQ is a certification system that works to reduce the flow of hazardous substances to Swedish treatment plants and to create a sustainable nutrient recycling. According to REVAQ, the yearly accumulating rate of metals should not exceed 0.2% in soil per year. Silver and bismuth are two metals that do not fulfill this requirement. The silver concentration in sludge decreased during the last decade, however the last few years, it has leveled off.

Although Lean has received an increased amount of attention in the service context, research still has not established how successfully Lean manages to increase service productivity; since service productivity consists of both efficiency and quality. Research regarding productivity discusses the risk of a tradeoff between efficiency and quality in service production processes. Therefore, this thesis aims to explore if the tradeoff in a production setting with low variability in demand and low customer participation exists, after Lean has been implemented. With a qualitative approach, a case study has been conducted at Scandinavian Airlines Ground Handling to evaluate the effects of Lean in the baggage handling process. The result of the study shows that the tradeoff has not been overcome; efficiency has increased at the expense of quality.

The purpose of this thesis is to see how small differences in a store can affect the customer behavior. The changes consist of auditory and visual sensory cues. Since many companies today makes a lot of changes in their styling element, but without knowing how it really affects the customer behavior we thought it would be interesting to see by doing an experiment at IKEA. The study is therefore based on a quantitative research method, where theories have been described and from which hypotheses have been derived to test the theories. The experience took place at IKEA during two weeks where 5732 observations were made.The result from the experiment is that the sensory cue sight makes individuals spend more time in the environment but not creating attention.

It has now passed two years since the new site- and construction law, PBL, went into force. It replaced the previous PBL applicable since 1987, and it involves relatively large changes in many different areas of the construction sector. The ambitions of the new law are for instance to simplify and clarify the legal text, increase efficiency in the permitting processes and improve the quality of construction. To achieve this, a variety of changes was made. Some of the most important are: inserted deadline in the processing of building applications, extended assessment of building applications, revised rules about controlplan and quality manager, a certificate is required to start and end the project, an additional meeting is inserted and the construction management of the municipalities will have to do a mandatory visit at the work scene.