The scope of this project is to make a comparison of costs associated with wind and nuclear power in order to decide which one of these is the most suitable in the case of an increased demand for electricity. It is also investigated if there are other factors that can influence the choice of energy source.An average cost is calculated in terms of kronor per kilowatt-hour (SEK/kWh) using cost of investment, operation & maintenance and taxes & subsidies. Total investment cost is recalculated to production cost using the annuity method at three different interest rates (6%, 9% and 12%).The comparison is made between three cases of wind power and two cases of nuclear power. For wind power there are two ocean-based (300MW and 100MW installed capacity, respectively) and one land-based (60MW) wind farm. For nuclear power there is one EPR-reactor (1600MW) and one AP1000-reactor (1100MW).

ProblemThe manufacturing industry is a mature industry where the profit margins are small and the competition is hard. This makes it hard for both manufacturers and resellers to gain market shares and reach reasonable profit margins only by selling products. Therefore Swecon who is reseller for Volvo Construction Equipment tries to find alternative methods and ways to increase their profit. An alternative source of income could be to develop the range of services that are connected to the ground products.PurposeThe purpose of the thesis is to examine how Swecon in southern Sweden can improve their offers of existing services connected to the ground product and investigate the demand of new such services.MethodThis study is based on a qualitative study of five of Swecons local offices and five of Swecons customers. The empirical framework is mostly based on personal interviews but in some cases information was retrieved by using phone interviews.

 The current estimations in regards to the increase in environmental threats underline the importance of influencing individual behavior towards a more sustainable lifestyle. At the same time current trends show an increasing interest into ecologically produced foods around the world and that the consumption has seen a major rise in the 20th century. It is therefore of great importance that companies show their interest and commitment in order to offer and influence the consumer into choosing the environmentally sustainable alternative. Also, in order to properly reach out to the consumers, it is of outmost importance to map out their attitude towards these types of products. It is equally important, in order to fully realize the potential of successful positioning, to show an understanding for the underlying decision processes that dictates purchase.

Ever since Internet revolutionized the world, e-stores and e-commerce has grown into becoming a natural part of consumer's everyday life. Much thanks to it's facilitative and time saving characteristics. Online, consumers are provided with a huge assortment and the opportunity to shop any time they like. Yet, the absolute greatness of e-stores is the possibility to push prices below the physical store price, which seems to be most appreciated to a large extent by consumers worldwide. The fact that e-store sales in Sweden grew 14% last year verifies this.As more players step into the virtual world of e-commerce the competition gets tougher.

In a time of fierce global competition, where an immense amount of commercial messages reaches consumers around the clock and in every conceivable context, companies constantly seek to find new ways to reach out with their product. One way to do so, that has increased in popularity in recent years, is the use of gift bags. A gift bag may contain samples, miniature products and even products in full size, as a rule from several different brands, which the recipient receives free of charge. The gift bag is typically distributed at some form of event, such as store openings, fashion shows, theme parties and the like, and the receiver of the gift bag can then evaluate the content without any obligation to purchase. The ambition of the companies that choose to participate with their products in a gift bag is, of course, that the recipient will find their products satisfactory, and ideally, that he or she will continue to consume the brand in the future.There are numerous scientific research contributions related to the use of free samples, but very few that concern the gift bag, where a collection of samples from different sources and brands appear.

Three different factors are thought to be involved in the increased segregation in Stockholm: the living segregation, scientific and political dissonances and the social economical factor. Many segregated areas have many inhabitants with foreign background. Schools in these areas have a higher number of students with lower grades compared to other schools with higher number of students that are ethnical Swedes. Jordbromalmsskolan is a school in Haninge kommun that is one of the seven schools in Stockholms suburbs where students graduate with the lowest grades. The school is suffering from a very bad reputation because of many problems like fights between students and lack of resources like purchase stop.

Companies of today are facing a development where it is more significant to focus on existing customers since the approach constitute a more cost reducing way, compared to finding new customers. During the last decades the marketing has therefore moved towards a relationship based marketing. Companies emphasize creating long-term relationships with customers, instead of consider the sale as a non-recurrent phenomenon. To engender customer loyalty has been an essential objective in the creation of long-term relationships.In this essay the authors have chosen to do a study which enlighten how companies in the ready-made apparel business produce added value to their brand and through this generate customer loyalty. Through a case study we analyze how Filippa K, Tiger of Sweden and Gant do to maintain value in their brand, in both a business- and customer perspective.

Purpose: Corporations today see a greater responsibility towards society regarding the environmental impact of their actions, using available transportation options that are more eco-friendly can reduce this impact significantly. Martinsen and Björklund (2012) identifies a set of gaps between supply and demand of green logistics services. This paper aims to address what it is that affects the demand for these alternative solutions and what could be done to increase the usage of them, thereby decreasing this gap.Design/methodology/approach: A quantitative study with six Logistics Service Providers (LSP) and 24 companies that purchase transportation services, all operating in Sweden. Data is collected through semi-structured telephone interviews with people responsible for the purchasing of transports as well as key account managers within the service providing companies.Findings: Just as the LSP?s interviewed in this paper thought, the main focus of the transport buying companies are the costs.

Together with Attends in Aneby a thesis of 15 ECTS (credits) have been undertaken. The assignment was to develop a new incontinence product for single use. Users of the product value comfort, flexibility, softness, comfort and a discreet product. Users are for individuals with incontinence problems that usually receive the products via prescription. The product must also have an attractive price and good quality from the purchase / originator's perspective.Currently there are two models that Attends supplies, which the project intends to develop, (Slips / Briefs and Pull On's).

Each year approximately 2,000 new detailed development plans are accepted in Sweden. When an area is covered by a new detailed development plan, it is often necessary that land has to be acquired to adjust the property units to the new plan. The owner conditions of the property units can usually be adjusted through negotiations between the seller and the buyer. But in some situations, when no agreements can be reached, it is possible to use coercive measures to purchase the land. Compulsory purchases are only permitted when certain legal criteria?s are met.

This report is the result of a thesis carried out at the Department of Innovation, Design and Technology (IDT), at Mälardalen University on behalf of ABB AB Machines.The year was 1988 when ASEA and Brown Boveri formed a joint venture under the name ABB (Asea Brown Boveri).We perform our thesis at the division Discrete Automation and Motion where they primarily develops, manufactures and sells synchronous and asynchronous AC motors and generators.The main purpose of this thesis was initially to write a general packaging instruction, but the priority changed to develop more specific packaging instructions for Rotors, Stator gables, Bearing support and Outer Cover (plates) instead.The work started off to deal with a problem about that the staff had to start its work to grind away rust on the stator gables due to those stored outdoors. The result was mainly an investment in a new gable rack so that the material can be stored inside, as well as a packing instruction as it was originally intended.The problem on the bearing supports were that the staff thought it was demanding and difficult to clean them from the rustproofing they were greased in. If it is not possible to remove all rust protection it can cause the paint to not attach properly. After having compared with similar articles a test were done to order a pair of bearing supports without corrosion inhibitor, which gave good results. This initiative also set in motion a process to do the same for more different items.For special pallet, a survey were made of the process with two different VSM and a calculation of how much ABB would earn at ordering more special pallets than getting the material delivered on the A-pallets.

The aim with this paper is to elucidate the current situation of the Swedish glulam market. This thesis paper will also consider prospects for the future and analyse the relationship between customer and producer and what makes a specific supplier attractive to their customer. The companies that are included in the paper are: Martinsons Group AB, Moelven Töreboda AB and Setra Group AB, Långshyttan. These three companies are the members of the organi¬sation Svenskt Limträ AB and produce the largest part of glulam in Sweden. Together they produce 140 000 ? 150 000 m3 a year. The study is based on interviews with all three producers and a customer survey, where I have interviewed five customer to each producer.

The purpose of this essay is to investigate the construction of sexuality in Swedish school libraries through the lens of Foucault?s concept of power/knowledge. Five libraries were investigated, using two kinds of method: discourse analysis of titles, classification codes and subject headings of sex education materials, and qualitative interviews with librarians working at each of the libraries. Most sex education materials were classified within the medicine section, illustrating the continued authority of medical discourse in matters concerning sexuality. Books for younger audiences were often written for either boys or girls, reproducing a binary understanding of gender.

Nynas produces bitumen at two refineries in Sweden. The bitumen is shipped to seven depots along the swedish coast line, and from the depots special trucks handle the transportation to customers. Recently Nynas has transformed its supply chain and closed down a few depots. At the moment the company is considering a further reduction of the number of depots. In connection to these discussions an analyse of the companys distributionsystem and of possible changes is required.

Storage of biomass is often associated with problems such as heat development, dry matter losses and reduction of fuel quality. The rise in temperature can potentially cause a risk of self-ignition in the fuel storage. Moreover, emissions from storage piles can cause health problems in the surrounding. The dry matter losses and reduction of fuel quality can have economical effects. The aim of this thesis project is to develop guidelines on how to store large amount of biomass at Vattenfalls heat and power plants in an optimal way.