Syftet med denna studie är att ta reda på hur kompositörer inom genren svensk folkmusik idag går till väga när de komponerar ny musik, hur deras arbetsprocess ser ut och vilka arbetssätt de använder sig av. Det teoretiska perspektivet är hämtat från Stan Bennet och Max Grafs tidigare forskning om hur kompositionsprocessen ser ut för kompositörer inom konstmusikgenren. Ett didaktiskt perspektiv används också som utgångspunkt. Bakgrunden till arbetet baserar jag på tidigare forskning om kompositionsprocessen, forskning om gehörsmusik och kreativitet och idé-skapande. Jag ser även till vikten av att tränas i sitt divergenta tänkande som komponerande innebär.

Background: Performance measurement as a management control tool has received considerable academic attention. As the number of inter-organisational relationships, such as customer-supplier relationships, increases, there is a new scope for performance measurement as a management control tool. In order for a company to assess the effectiveness of its supplier relationships it has to define, measure and evaluate variables that are critical for the success of the relationship. The role of management control, and thereby of performance measurement, has increasingly been discussed in theory. However, empirical research in this area is still somewhat limited.

A Geographic Information System (GIS) is about presentinginformation with the map as a base. This is increasingly being used on internetsites and in mobile apps. With a GPS it is possible to see where you are andhow to reach a destination or check if the bus is in time. A question to ask isif this technology is possible to implement in ordinary primary schooleducation. If it is, learning history, geography, religion and so on with a GISlearning tool might be possible.

This thesis is based upon the work done at Westinghouse electric company (WEC)inVästerås during the spring semester of 2015 and describes the development of a quickcoupler with associated blade changing tool. These are meant to be used togetherwith a sawing tool that the company uses for the dismantling of nuclear reactors,which is performed under water.The aim of the thesis was to develop a complete manufacturing documentation withdrawings and related CAD models which Westinghouse later can use to manufacturethe tool and the quick coupler. It was also included in the assignment to, if necessary,modify parts of the saw tool to adapt these to the intended blade changing tool.A number of visits to the company's workshop was made during the time to study thesaw that the thesis is based upon. The purpose of these visits was to get a better ideaof the dimensions, construction and the field of use of the saw. On three of thoseoccasions various engineers and consultants accompanied us to discuss possibleproblems with different ideas.This was interspersed with information in the form of literature studies on quickcouplers to create a clearer picture of the nature of the task.When enough information had been gathered a functional analysis was made to dividethe main problem into subthis phase the idea and concept generating process took place.The methods used for this was mainly brain writing and brainstorming.

Mitt examensarbete handlar om hur grundskoleelever ser på sitt lärande och sin motivation i ett musikalprojekt. Syftet är att beskriva detta, sätta det i samband med skolans värdegrund och få en förståelse för relationen mellan lärandet och motivationen. Undersökningen grundar sig på kvalitativa intervjuer med tio elever från två olika skolklasser i skolår åtta. Metoden har även stöd av observationer. Intervjusvaren är strukturerade efter teman.

This report discusses developing a software log tool for analysis of industrial processes. The target was to develop software that can help electro Engineers for monitor and fault finding in industrial processes. The tool is called PLS (Process log server), and is developed in Visual Studio.NET Framework 2005. PLS works as a client with Beijer Electronics OPC Server. The program is able to read data from PLC (Programmable Logic Controller), trough the OPC Server.

Eco-design is all about improving products environmental performances throughout the products lifecycle by including the environmental aspect into the product development process. There are a large number of different tools that can be used for this, but there are several factors that can affect which one will be the best to use. Some tools for eco-design takes comprehensive studies and can only be performed by experts, while some tools can be used more time- and cost efficient and with basic knowledge. The choice of tool should be based on the company?s situation.This report describes the research of how the design and furniture company Blå Station could include a tool for eco-design in their product development process.

ProblemIdeation in group is used by many, often as a tool for creating new and innovative ways to solve problems and creating change. Groups may have difficulties to move from the phase of inspiration to the phase of ideation, if information and ideas aren?t defined in the team.The authors claim that this process can be helped by providing practical tools that are adapted and tested for the purpose. The reason is to foster concretization of volatile thoughts in form of inspiration and information.PurposeThe study aims to investigate how Storyboard as a tool can be used to concretize thoughts and inspiration in a group before ideation.MethodIn order to collect empirical data the authors along with four other facilitators, conducted 24 DO TANK:s for the innovation contest Smart Lunch. The empirical data where then analyzed using theories related to the topic.

Volvo Human Monitoring (VHM) is an ongoing project at Volvo Cars where they measure, amongst other parameters, inhalation and exhalation through a device called Respiratory Inductance Plethysmograph (RIP), on drivers. RIP measures changes in the cross-sectional area of the chest and abdomen. When the driver is in motion, such as when she is turning the vehicle, the cross-sectional area changes and noise in the RIP signal may arise.The noise results in a large number of manual adjustments in the analysis of the RIP signal, which is very time consuming and the validity of the device for measuring inhalation and exhalation is questioned.The purpose of this study was to improve the efficiency of the analysis of the RIP signal. The goal was to create a new data processing tool in Matlab that automatically detects inhalation and exhalation from a RIP signal with higher validity compared to the previous data processing tool.In this study, nine tests were performed on drivers while they were driving in different scenarios such as highway, country road and in city traffic. Inhalation and exhalation was measured using a RIP, a pneumotachograph with a tightly sealed facemask and a thermocouple placed between the nose and mouth, which was used as reference to the RIP.The result of this study was a data processing tool that automatically detects inhalation and exhalation with higher validity compared to the previous data processing tool.

Development and accuracy tests of advanced exchange trading systems require well adjusted tools for testing. Aptness of these tools are probable to have a major impact on identification of bugs and verification of new functionality. Identifying erroneous parts and bottlenecks of the trading system is of outmost importance for the exchange as a whole since stability and correctness are two of the determinant factors its viability is measured by. This paper covers how this test-tool was created and the motivation behind the design choices made. The tool was created with the goal to be broad enough to cover the majority of cases that could arise, fast enough to be able to test the trading systems speed limitations (i.e.

This paper is about the extent to which simplified penetration calculations ofsmall-caliber projectiles is a useful tool for assessing the physical protectioncapability. The work should be seen as an attempt to create an accessible tool inthe form of a simplified equation that allows for a better and safer use of thenaval vessels. The tool will also be used at different levels so that decisions andinstructions could be clearer.Performed calculations show a very limited capacity of a ship's basic design interms of physical protection against the use of small-caliber projectiles.How do we know that the calculations correct? By verifying the calculations withpractical shooting tests, a substantial condition to answer the question will becreated. To shoot against a material with two different thicknesses estimated toproduce perforation and non-perforation is a good approximation of the equationusability in the context..

Volvo Human Monitoring (VHM) is an ongoing project at Volvo Cars where they measure, amongst other parameters, inhalation and exhalation through a device called Respiratory Inductance Plethysmograph (RIP), on drivers. RIP measures changes in the cross-sectional area of the chest and abdomen. When the driver is in motion, such as when she is turning the vehicle, the cross-sectional area changes and noise in the RIP signal may arise.The noise results in a large number of manual adjustments in the analysis of the RIP signal, which is very time consuming and the validity of the device for measuring inhalation and exhalation is questioned.The purpose of this study was to improve the efficiency of the analysis of the RIP signal. The goal was to create a new data processing tool in Matlab that automatically detects inhalation and exhalation from a RIP signal with higher validity compared to the previous data processing tool.In this study, nine tests were performed on drivers while they were driving in different scenarios such as highway, country road and in city traffic. Inhalation and exhalation was measured using a RIP, a pneumotachograph with a tightly sealed facemask and a thermocouple placed between the nose and mouth, which was used as reference to the RIP.The result of this study was a data processing tool that automatically detects inhalation and exhalation with higher validity compared to the previous data processing tool.

This thesis presents the work of developing and testing a programming tool specially designed for children. The purpose of this tool is to make children capable of creating visual simulations and games that consist of actors interacting in a virtual world. The name of the programming tool is Behavior Cards, which comes from the fact that actors are programmed by giving them cards representing different kinds of behaviors. Behaviors are to some extent pre-programmed and can include general events specifying how the actors should act in different situations, in contrast to specifying every possible situation that can occur. The idea is that Behavior Cards should be easier to use than a more traditional text based programming tool, but it should also be expressive within the domain of visual games.

I detta arbete utforskas en saxofonists str?van efter ett mer intuitivt komponerande. Arbetet utg?r ifr?n en inspelad soloimprovisation som sedan transkriberas och ligger till grunden f?r tv? olika kompositioner med tv? olika kompositionstekniker, de analyseras och j?mf?rs. Syftet med arbetet ?r att f?rs?ka finna s?tt att komponera med mer intuition och mindre baserat p? ett musikteoretiskt korrekt s?tt.

The aim of this study is about how school librarians useweblogs as a working tool. I wanted to examine how someschool librarians use weblogs as a working tool and why theyare using them. I also wanted to know the advantages anddisadvantages they see with this tool. I believe that children andteenagers are interested in social media- tools and also are bigusers and consumers of these tools. Therefore I thought it mightbe interesting to examine how school librarians who havechildren and young people as their main target group, work withweblogs which is one of many social media tools.The methodology used for this study is interviews.