Today the human being see energy as a matter of course but the resources that is used for extract energy is today not enough for the world demand. Of all the energy that is used in Sweden today approximately 40 % goes to the building stock. This number will most likely increase if not necessary actions will be made on the already existing building stock since new houses constantly are built which will be added up on the already existing energy supply. This takes cause of action on the already existing building stocks, to fulfill the demands of the future use of energy that has been set by the authority. At the same time the thermal conditions cannot be influenced by the necessary changes that must be made.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

The energy use in a workshop company has been examined in this work in order to find areas for energy efficiency improvement. The combined oil and electricity heating in the company were compared with other alternative heating systems including cooling of the premises in following combinations:Ground source heat pump for heating and coolingDistrict heating and absorption coolingDistrict heating and low temperate surface water coolingEnergy use, operation costs and carbon dioxide emissions were calculated for the current heating systems and the three alternatives including cooling. The ground source heat pump for heating and cooling decreases bought energy with 34 MWh annually compared to current heating only. The district heating and low temperate surface water cooling has the largest reduction of operation cost and carbon dioxide. The operation cost decreases with 42 kSEK and the carbon dioxide with 43 metric ton CO2 annually.

Today most ice rinks in Sweden use secondary refrigeration systems with a solution of calcium chloride and water as secondary refrigerant. Due to the large amount of energy such a system uses more efficient systems would be desired.An earlier study concluded in the possibilities of using carbon dioxide as secondary refrigerant with copper tubes as the loops in the ice rink. Since then 3 ice rink refrigeration systems has been built with carbon dioxide in copper tubes. Excluding the ones being direct involved in those projects there is still very little knowledge about how these system works. This study has been made primarily with the aim of adding to the knowledge concerning availability and cost and secondary to look at possibilities for improvement.A comparison between systems with carbon dioxide, calcium chloride respective ammonium solved in water has been made by using Decision Matrix.

The aim of this study was to conduct an instrument test of the Canadian questionnaire Alberta Context Tool (ACT) version Long-Term care for Swedish conditions. ACT is designed in order to measure the context in the care environment and different behaviours related to the changes in clinical practice. In total, 159 Licensed Practical Nurses (LPNs) and Registered Nurses (RNs) within municipality care of the elderly were included in the survey. The test included the instrument's reliability and face validity.The reliability test was implemented through calculation of Cronbach´s Alpha, and showed internal consistency for five of the scales of the ACT-instrument with Cronbach´s Alpha values ranging between 0,728 and 0,873. However, three dimensions got lower values (0,558 - 0,683).The analysis was carried out with content analysis and carried out for LPNs and RNs in separate groups.

Competence Portals are software tools that are intended to make it easier for persons that have had no previous contact to find and contact each other. The portals can address areas ranging from finding an expert within an organisation to the marketing of the competence of a region or a research centre to other organisations. The purpose of the thesis is to examine the necessity of Competence Portals in research-intensive organisations. Important characteristics of the information in such portals have been identified and used as a basis for recommendations regarding how Competence Portals could be designed. Furthermore, the thesis focuses on the task of finding a source of knowledge within an organisation.

This thesis has been performed at International Aluminum Casting AB in Eskilstuna,Sweden.International Aluminum Casting is currently working with a number of improvementsin their production in order to achieve their vision of being the leading aluminum foundry in Sweden. As a step in their improvement efforts, focus was directed ondeveloping the company's fixtures for machining.Efforts were focused on two main objectives: to develop a complete proposal on afixture which leads to a more rational use of an assigned part and also form general design advice for development of fixtures in the future.During the work progress, discussions have been made with experts at International Aluminum Casting within the field of fixture design. The objective was to obtain sufficient knowledge about the underlying problems with the current fixture for the part. At this stage of the thesis, a number of essential criteria for fixture design were produced. Information and inspiration were obtained by examining the company?s currently developed fixtures.After gathering the necessary information the process of developing three different fixture concepts started.

In order to drive innovation and growth in a nation is it important to have innovative companies. Many of those innovative companies are smaller companies, which are in need of capital injections for expansion of its operations or to be able to produce a commercial product. In many cases the banks will not lend because they believe there is too great a risk that they will not get their money back. It is in this situation venture capital becomes interesting. Venture capitalists? see the potential the product and/or entrepreneur possesses and are therefore more willing to take the risk in investing in these companies.

This degree project deals with the concept of creativity and the creative output based on howSwedish upper-secondary design teachers within the Technical Engineering Programexperience this from a student's perspective. The project discusses how the concept creativityis interpreted and how the creative output is regarded by educationalists and professionaldesigners and how this then can be related to literature on the subject and in the steeringdocuments. The purpose of this degree project is to visualize the interviewees' viewpoint oncreativity and the significance of experience, skills, and environment for the creative outputand within the field of design. This in order to, in the pedagogic and didactic situation, enablethe improvement of teaching so that creativity and its output come to show. Moreover, theproject aims to create a ground for discussion of the view of the importance of these skills inthe pedagogic/didactic situation.In order to reach this aim, I have read literature on creativity from several perspectives andcarried out eight qualitative structured interviews: both with three educationalists withoutexperience within the design profession, and with two educationalists who are or have beenactive within the design profession, as well as with three professional designers.

Akademiska Hus owns and manages the university facilities in most university towns in Sweden. Bilbergska house in Örebro was built in 2008 by Akademiska Hus, and designed by White Architects. Today's buildings must meet accessibility requirements determined by Swedish Board of Housing, and it is the developer who must ensure that they are fulfilled. Swedish Board of Housing requirements are often vaguely written and interpretation space is large.This report aims to investigate how much of the requirements which are set towards the University and landlord Akademiska Hus are being achieved. This is done by studying the requirements that are set.

This paper is a study and comparison between the two Wireless LAN (WLAN) standards HiperLAN/2 and IEEE 802.11a. WLANs are used instead or together with ordinary LANs to increase mobility in for example an office. HiperLAN/2 is an European standard developed by ETSI and the IEEEs standard is American. A WLAN-card consists roughly of a Medium Access Control (MAC), Physichal layer (PHY) and an antenna. The antenna is the same for the different standards.

Syfte: Syftet med studien är att bidra med en ökad förståelse för hur kvalitetsförbättringsarbete används för att eliminera brister och fel inom byggbranschen.Metod:  Studien utfördes genom kvalitativ metod med hermeneutiskt synsätt samt tolkning. Fallstudien omfattar fyra intervjurespondenter varav en pilotstudie samt 42 enkäter till samtliga tjänstemän och medarbetare med ledaransvar på olika nivåer inom kvalitetsförbättringsarbetet. Insamlad data bearbetades med hjälp av tematisk analys för att sedan analyseras och tolkas. Slutligen drogs slutsatser från resultat och analysmaterialet.Resultat & Slutsats: Med hjälp av litteraturgenomgången och resultatet av det undersökta fallföretaget har studien kommit fram till att det är utmanande och svårt men inte omöjligt att implementera kvalitetsförbättringsmetoder och tekniker i byggbranschen utifrån de unika förutsättningar som råder i byggbranschen. Det råder samsyn bland de tillfrågade gällande vad de upplever är de vanligast förekommande kvalitetsbrister och fel vid slutbesiktning.

From policy to practice - a study of textile companies view about challenges with implementing CSR policies examine the textile companies awareness of which challenges there are with the implementation of codes of conduct in a global supply chain, as well as to analyze how the companies deal with the challenges. With increased globalization many companies have chosen to outsource entire or parts of the production in various developing and newly industrialized countries. However, the working conditions in these countries do not always fulfill the labor standards that are defined in various conventions. The society began demanding companies to take social responsibility. The social responsibility goes under the term Corporate social responsibility (CSR).

The aim of this study was to get an insight into the pet owners? experiences associated with euthanasia at small animal clinics, concerning their emotions, the treatment by the personnel and the experiences around various types of support provided by the personnel. The target group was pet owners who had had their animal euthanized at a small animal clinic. Incomplete survey responses and responses where it was clear that the euthanasia took place in the owner?s home were excluded. In the end, a total of 442 pet owners participated and out of those were 92 % women and 8 % were men. The study was carried out using a web-based questionnaire consisting of standardized questions with the opportunity to give further comments to each question and in the field of ?Other comments? as well. Swedish small animal related companies and forums were contacted via email and were asked to alert about the present study on their website or forum.

Bakgrund: Ekonomisk, teknisk, medicinsk utveckling och medborgares förväntningar styr ökade krav på god vård. Arbetet i hälso- och sjukvården är kunskapsintensivt och i ständig utveckling. Chefer ska kunna ge instruktioner, förtydliga arbetsuppgifter, stödja prioriteringar och ge medarbetare stöd och återkoppling. Detta sätter fokus på ledarskap och lärande. Socialstyrelsen i Sverige menar att det behövs ökade kunskaper i hälso- och sjukvården, om lärandestyrt förbättringsarbete.