With the farming methods of the past century the agricultural landscape has changed. This has led to the fact that many habitats and species have been significantly reduced. Sweden is committed to the preservation of biodiversity through various conventions and laws. In the EU's Common Agricultural Policy there are currently agro-environmental schemes, which were created as an instrument for reducing the negative impacts of agriculture on nature and environment. Within this system any farmer who perform environmental measures are financially compensated for this.

In this study is being examined how cities can be planned in the face of rising water levels and extreme weather, due to the changing climate. The starting point has been to investigate how the problems can be tackled and how the positive sides of water in the city can be strengthened, and synergy effects and greater sustainability be achieved thereby. The method has been literature studies and case studies containing interviews and visits. Göteborg, Kristianstad and Arvika have been studied for discussions and ideas about adaptation. Today, building near water is very popular which brings both advantages and disadvantages.

Within process or manufacturing industries, the production of goods and services or the products themselves may have negative side effects such as pollution. An important task for environmental policy is to control and limit these pollutions, for example via regulatory measures. Although, the efficiency of such measures vary greatly between different industries and an increasingly important task for environmental policy is then to encourage companies to engage in environmentally motivated innovation. Governments can utilize other measures than regulation to indirectly decrease pollution. This thesis aims to analyze such activities and how it affects the innovativeness of wastewater treatment, refrigeration and automobile manufacturing industries.

Problem: In society of today corporate competence is an important factor for survivor and development. IT is developing rapidly and can not be ignored by companies. Then need for people with IT-competence is conquent increasing. A survey of corporate IT-competence is therefore of interest for companies as well as for local authorities. To determine the IT competence within an organisation, this competence has to be measurable.

Hydropower is an important source of energy in Sweden and accounts for about 46 % of the total energy production. Sweden has about 1 200 hydropower plants and with the intention of raising the pressure head of the water and to store water, dams are built by the power plants. The storage reservoirs make it possible to adjust the energy production by demand and season. Dams in connection to the reservoirs are subjected to additional loading during periods of high floods or when an icecap in the winter is formed on the reservoirs. In order to maintain the dam safety, the power companies in Sweden are working with guidelines for dam safety from RIDAS.

The Swedish government decided in 1996 that the governmental authorities are to implemementenvironmental management systems. Each year, the Swedish Environmental ProtectionAgency compiles the authorities? reports on their environmental management systems. Thecompilation shows that not more than 20 % of the authorities perform environmental audits.This study aims to investigate the authorities? view of internal environmental audits, the incentivesof performing them.

This report is a degree paper made for the Engineering program in Technical Chemistry at the School of Engineering, Jönköping University.The intention of the project which is described, is to answer whether HV71 might become environmentally certified according to the criteria of "miljödiplomering". The project also included an investigation of which further steps and measures must be undertaken by the enterprise in order to achieve the certificate. The final part was to implement the necessary requirements for the certification.The report starts with a short background where the origin and function of environmental management is briefly explained.The report continues with how the practical work with the environmental certification was done according to requirements of Jönköping municipality. Motivations behind each part of the process are given as well as explanations of how each part of the process was carried out.The final result of the project was that HV71 took the measures needed to live up to the required demands. After a revision made by Miljöstrategen i Jönköping AB, HV71 passed the demands and became thereby an environmentally certified business..

In process oriented organizations, it is important to have well-functioning work processes tosupport the work being performed. In order to accomplish this, the organization has to makecertain decisions regarding the design and usage of the processes. This master thesis is based ona case study of a work process that is being used for the industrialization of products at Ericssonin Katrineholm. The aim of the study is twofold. One aim is to improve the studied process byidentifying improvement opportunities and carrying out the required adjustments.

Active sensors are used a lot in the society and industry, for example to gain better control over processes or to get proximity sensing features in different products. Within industry there is great interest in developing safe automation products that can be controlled with high accuracy but still at a low cost.The goal of this project is to develop a prototype of a non-contact rangefinder that measures distance using infrared light. The sensor is to be used for various applications in industries with relatively high accuracy and be compact, but at a low cost. By implementing a rangefinder into a product, more accurate detections of an object?s presence can be done.In this project a new distance sensor, EPC600 from ESPROS, was used.

This thesis has been carried out to the Technology Group at industrial plant Tube Mill2012, which belongs to the Sandvik AB. Technology Group is a unit that takes care ofall requirements and suggestions regarding investigations, test runs and designmodifications. The main objective is to identify and analyze the existing initializationprocess to see where improvement opportunities exist and to come up withsuggestions for improvement, supported by previous research and literature. Anextensive literature search and case study has been conducted to provide a solidfoundation to refer to during the work. Completing the interviews and the workshopgave a clear picture of their unstructured work and approach, how the lowrequirements on the received orders caused problems for the group as well as thelack of a standardized resource allocation method provides major delay factors.Solution proposal then became a very easy process model in five steps with all theinformation gathered in one place.

This study is a qualitative investigation where surveys where performed on five Swedes from Lebanon. The purpose with the survey was to learn how these persons were affected by the war against Lebanon in the summer 2006, how they reacted to it and what measures they took to overcome their crisis. The result shows that the state of crisis of the interviewed persons was caused by several factors, such as the war being both unexpected and intensive. Other causes was the worry that their children would be hurt by the effects of the war as well as the material and human losses that the war brought.The interviewed persons responded with both negative and positive reactions, which may have affect their recovery process. Some of them where offered physiological support in Sweden by their municipalities.

This report is the result of a thesis performed at Westermo Industrial Ltd with its headquarters in Stora Sundby and it sums up the author's studies for University Engineering in Innovation, Production and Logistics at Mälardalen University.The main goal of the thesis was to identify problems and suggest actions that lead to the reduction of the repair time from 3 weeks to 2 weeks. The key questions that were answered in order to achieve the thesis objectives are: What are the biggest challenges that make the repair process time last for 3 weeks? What are the necessary means and measures in order to reduce the repair length to 2 weeks? The author adjusted the work to the Swedish repairs, repair issues that arise from sell unit Westermo Data Communications AB with its office in Västerås and performed the status report by mapping the repair process, through using observations, interviews and bibliography research studies. A flow map of four sub-processes (Inbound Delivery, BackOffice, Repair Department, and Logistics) was made and each section was observed, where also the employees were interviewed. Data that has been collected was analysed by the author and the decision to execute a workshop that affects Repair Department and Logistics was made.

Problems: How does Volvos CE: s four Swedish plants work with investment appraisals? Does the work differ between the plants? If differences exist, what can be improved in order to make the work more uniform?  Purpose: To map the work with investment appraisals at Volvo CE: s four Swedish plats, to analyze differences in work between the plants and give proposals to a more homogenous working.Method: A method of qualitative nature. The study mainly contains raw data from semi structured interviews. Secondary data, such as internal policy documents and documentation of completed investment projects, has supplemented the raw data. Analysis: The mapping shows significant differences in work with investments between Volvo CE: s Swedish plants.

The number of data centers and their capacity is increasing throughout the world. Theenergy used in these data centers and the emissions from the use are increasing at thesame rate. The total use of energy will double from 2008 to 2011 based on the trends indata centers use. Research in this area says that the emissions from data centers willhave surpassed the level of airline traffic in 2020. The index used today to compare howefficient a data center is, called PUE, is lacking some information.

The purpose with this study was to systematically examine scientific studies of audiologic group rehabilitation. The definition of audiological rehabilitation was explored, different variables that influence the result and how the outcome measures should be done and its relationship with the goals of audiologic rehabilitation. The method used was a literature study. Pubmed and Cinahl were used for the search of literature. Some articles were searched from scientific studies reference lists and also advice from the supervisor.The result from the different studies shows that the effect of rehabilitation varies as there are many aspects that have an affect on the outcome measure.