The purpose behind our study was to analyze people who were born in the 1940s' reflections on life after the age of 60, as well as examining which strategies they had before retirement. The study built on the themes; leisure pursuit and social networks,retirement, life after the age of 60, the future care and the care needs and its mediums. These themes have also provided the base for our interview guide. In order to answer our aims and issues we chose to use a qualitative method. We have interviewed eight people born in the 1940s in order to provide a varied picture of their reflections and strategies for the future.

To design new and high tech products the engineers rely more and more on computer based simulations to investigate the properties and behavior for a component or system.To verify these computer based simulations the dynamic properties for the components of the drivetrain needs to be verified. Therefore measurements of the stiffness and vibrations for the rear axle has been performed. This report show how the measurements has been Implemented and evaluated, along with some interesting results for the rear axles properties.The static stiffness for the drive shaft along with the axle-gear has been determined. It is found that the stiffness for the whole rear axle is near the stiffness for the drive shaft, which means that the drive shaft becomes the dominant component of the system and affects the rear axle stiffness the most. The measured stiffness of the driveshaft is close to its theoretical stiffness.The stiffness for solely the hypoid-gear have been calculated using the stiffness for the rear axle and driveshaft, and thus has a range for the stiffness of the hypoid gear been determined.The backlash for the whole rear axle and for some individual components has been determined, where the backlash between pinion and crown-wheel has negligible impact on the total backlash.Measurements of the crown-wheel and pinion movements have been conducted, where the direction of movement is consistent with the theoretical direction of the forces.The vibration measurements show that the vibrations are more severe at certain rotational speeds.

After a workshop in Kuopio held in June 2006, Interbull decided to go forward with the development of a system for beef international genetic evaluation and a three year project called Interbeef was launched in June 2007. The participating countries are so far limited to Europe and the only trait evaluated at present is adjusted weaning weight (weight at 200 days). The results from a first international genetic evaluation have been shared with the countries but are not yet official. The evaluation is based on data from purebred Charolais and Limousin. To achieve good estimates of proofs in an international context it is important that methods for data validation and model selection are Implemented.

The aim of this thesis is to explore possible differences between public and private companies? way to manage projects. In order to analyze the managerial aspects, we have studied the project of a new payment system Implemented at the public-transport organization Upplands Lokaltrafik (UL). The project enables mobile payment by text message (SMS). Most theory concerning the management of projects is developed for private companies.

AbstractThe purpose was to investigate whether a recovery perspective, viewed from a psychosocial approach is applied in municipal / private and county related care and rehabilitation. A recovery perspective means that the attending staff ensures that the clients are viewed as holistic individuals, where all aspects of life are considered to ensure adequate care and rehabilitation. A questionnaire was answered by staff in psychiatry, social psychiatry and addiction treatment from different areas of the municipal / private and county related sector.The results show no difference in application of a recovery perspective between these two types of organizations. However, there is a slight tendency (non-significant) to lower-rated general individual competencies for municipal / private. There is also a strong tendency (non-significant) to a general difference between the aspects of the Implemented recovery perspective, where the tendency is that the respondents as a whole estimate that the organization to a greater degree creates good conditions for a recovery perspective compared to the degree they are actually working on that basis.

Today small metal parts are mass-produced as for example rollers in cylinder bearings. At high velocity cutting the metal is cut with a great force in a scissor-like device. Both precision and repeatability is important to be able to guarantee good quality, but from an economical point of view it is also important to keep a great manufacturing capacity. The part of the process that is most time consuming is when the metal bar, that is about to be cut, is fed to the right position. Therefore it is interesting to examine if the time used for positioning can be reduced.

AbstractIt is important to choose which spare parts to keep in stock. With the right spareparts in stock the costs for inventory and production loss will decrease. Cavalieri et al. (2008) highlights that the balance between inventory cost and production loss is underestimated.  It affects the company and must be considered before decision on purchase.The problem with spare engines is that they are all more or less critical for the production. That can be a reason for why no previous research targeting engines and classification of with engine should be kept in stock has been found.

The main purpose of this thesis is to analyze why or why not Swedish municipalities implement the gender equality policy ? ?right to work fulltime?. In order to understand this institutional change, the analysis is based on a theoretical framework consisting of two fields: political representation and feminist institutionalism. The study is divided into two empirical inquiries. The first part is based on a quantitative survey that describes the casual relationship between two independent variables; women´s political representation and party ideology, and the dependent variable; political decision about ?right to work fulltime?.

This thesis work has been performed at the department of diagnosis and dependability at Volvo Car Company, Torslanda. The background of this project is based on interest in ascertaining how different factors possibly can affect a diagnosis method, which has been developed to find leaks in the fuel tank and evaporation system. According to the OBD II requirements leaks with an orifice diameter larger or equal to 0,5 mm, must be detected. The idea of the diagnosis method is to create an over pressure in the system with an air-pump. The current through the pump is measured and correlates to the power consumed by the pump.

One of our reasons is that we think the subject usability is interesting, is that we think it is an important. Usability is maybe the most important element when you develop or choose a system because it can save money for the companies and give the users a more delightful and better work environment. The aim of the investigation is to find out if the implementation of a web portal is a direction to reach higher usability in a complex system that consists of several different interacting applications. The objective of our investigation is to show if the implementation of a web portal is a direction to reach higher usability in a complex system that consists of several different interacting applications. In our case we will try to see if Karlshamns AB:s recently Implemented web portal is more useful than their previous application (Movex with interacting programs) One thought with the report is to give the system developers a perspective of how the usability can be in-house made applications versus standard applications.

Background: Since the coining of the phrase lean production by Womack, Jones and Roos in 1990, this mass production system of Japanese origin has been Implemented in a multitude of organizations throughout the world, the results being predominantly positive from a financial point of view. The possibly negative effects of mass production on worker motivation have been discussed since quality of work life became an important political issue in Sweden in the 1970?s. As the popularity of lean service is now increasing, there are still unresolved issues regarding the transferability of a mass production system to the service industry, particularly with regards to the motivation of service employees.Purpose: The purpose of our thesis is to study the lean system of a Swedish bank, SEB Way, from a management- as well as an employee perspective in order to describe how lean may affect the work motivation of service employees.Research procedure: The study is empirically based on observations and interviews on multiple hierarchical levels at SEB. We have conducted a total of 13 interviews with front line employees at SEB, with the central SEB Way team as well as two external lean specialists.Results: The study indicates that SEB Way has little direct influence on the intrinsic work motivation of the SEB front line employees, as work motivation was present prior to the implementation of lean.

The aim of this study is to examine if and to what extent the personnel at the local school perceive offensive treatment through the social media among the students and what the personnel thinks about the responsibility of the school to prevent this type of abuse. Offensive treatment through the social media has become a common occurrence among youth and affects health in both psychological and physical ways. As offensive treatment through the social media often takes place outside of school in the students spare time the responsibility of their health is unclear. But since it affects their school results the school has a responsibility to act, which is confirmed by legislation. However, the legislation does not mention offensive treatment through the social media and the school has no distinct guidelines to prevent this form of offensive treatment.

This thesis examines the organization Empower and their members, who consist of sex working women in Thailand. The purpose is to explore the more liberal point of view of prostitution and how the female members perceive Empower. Furthermore the study investigates if the organization can improve the sex workers empowerment. The study also delineates how these women reflect on their professional role as a sex working woman and whether the women relate to feminine discourses. The study is Implemented in Chiang Mai, Thailand during the fall of the year 2010 and is based on qualitative methods like interview, focus group, observations and text analysis.

This study aims to examine the views on digitization of eight respondents, all working at different libraryinstitutions in Sweden, and how their views are reflected in their library's digitization strategies. The poll wasconducted on the basis of Ingrid Mason's theory of information standards, their structure and sociopoliticalnature. The informantion standards are divided into three aspects, curatorial, semantic and technical, and theyaffect selection of, intellectual and physical access to the digitized material, which in the end is what constitutes the digital cultural heritage.The background to the study is that the Swedish library institutions in the current situation lacks a nationalstandard or a common strategy for the digitization of cultural heritage, while it is still Implemented digitizationprojects at many library institutions. The method used is qualitative, structured interviews with open-ended questions.The study shows that one of the main motives behind the libraries' digitization projects is to make librarymaterials available in a new way, creating greater opportunities for the users to take advantage of the material.The library users are the ones who mainly control what is digitized, although aspects of preservation ismentioned. Furthermore, it appears that the respondents believe that digitization offers improved capabilities tosearch and learn more about the collections, but the actual work of image capture, the addition of metadata,presentation to users and long-term preservation is very complex.Views on what it is to be digitized, how the material should be selected and provided with metadata and howit should be presented to users is what creates the standards that libraries use when they digitize their materials,and digitization of library materials creates new conditions for new users to access and use library material.This is a two years master?s thesis in Archive, Library and Museum studies..

This report deals with activities that from a CSR perspective are considered to create a shared value for a medium-sized construction company in Sweden. The CSR definition used in the report is the European Commission?s since it reflects the valuecreating aspects of CSR, in contrast to the traditional philanthropic aspect of CSR.Companies in the building construction industry have difficulties identifying activities that create value in society and in the company. The aim with the project is to, from a CSR perspective, identify and evaluate value creating activities in a building construction company. The activities will be evaluated with respect to competitiveness and how they can be Implemented into an organization.