C3LOOPS is an application for DJs and VJs based on surface interaction. A system is said to be based on surface interaction if it presents content on a two dimensional, endless surface that a user navigates through zoom, pan and incremental text filtering where processing is tightly coupled with the content without breaking the workflow. C3LOOPS is designed to encourage improvisation and collaboration. During improvisation changes occur rapidly. Allowing navigation through time as well as the two spatial dimensions of an interaction surface the possibility of unlimited undo operations opens up.

Acquiring a former station building can mean that the property owners must familiarize themselves with a lot of planning and building regulations. After the new Planning and Building Act code into force in 2011, the responsibility lie on the developer to ensure laws and regulations. Based on the regulatory framework that is available occurs sometimes balance issues, between care requirements and building codes. The station building in Ormaryd was acquired in 2009 by two individuals who intended to accommodate office and retail space in the building. In doing so a new local plan of the area was established, including regulations on how the building could be used. By including road safety and noise, the risk was not considered appropriate to use the station building for housing.

This thesis work was made to optimize the writing of the construction specificationsat FKA. These construction specifications are created before each plant modificationsthat is started because requirements from the Swedish radiation safety authority(SSM) and internally on Forsmarks nuclear group as constructions / implementationdocumentationThe study was done through seven interviews of two people at three different groupsinvolved in the construction specification and an interview from the group accreditedverification. The four selected groups were selected through an extensive analyticalwork resulted in an elimination matrix where these four groups was considered to bemost involved with the construction specification.The questions asked to these individuals were based on the instructions and sampletext that are described in the construction specification. To ensure the quality of thethesis were to limit itself to the chapters that were considered most relevant toimprove. The analysis revealed a number of points that should be improved, partlyinto the routines when writing the construction specification and when ether sampletext or suggestions should be changed and complemented.

This essay aims to report on the process of our documentation of art objects in the care of Smålands nation in Uppsala as a part of our education in museology and cultural heritage studies. The nation has a long history and our documentation shows many valuable objects reflecting this. The care of these objects is substandard and in great need of change. Our work process has involved photography and research about each object, the information has then been registered in our catalogue. The documentation has, besides the catalogue, generated a plan for future management and storage of the collection.

The purpose of this essay was to study the implementation of a policy document, which concerns questions of integration, in a municipality with an indirect government. I have especially focused on issues regarding how civil servants describe the usage of a specific policy document and to what extent their autonomy and the indirect government have had an impact on implementation, and to what extent signals from surrounding institutions have had an impact on the creation of the policy document. The study was based on qualitative interviews in groups, pairs and with single individuals with twenty-seven civil servants and politicians working with issues concerning the specific policy document.One of the conclusions of my study is that the reason for producing the document in the first place is that the municipality as an organization strives to acquire a sense of legitimacy. The intentions of the document have only partly been implemented by the civil servants and politicians, since the document is not used in their daily work. Here, their autonomy has played an important part, as the choice to not use the document is the servants' own.

Traditionally, mining has been performed mechanically with implementation ofyesterdays (and older) data. Several mining companies have started to useautonomous technology and robotics in the production areas although the harshmining environments make it unsuitable for today's electronic equipment. Despite allthe obstacles along the way of digitization, there seems to be no end in sight as thisdevelopment continues. This thesis focuses on what the mining industry is aiming forand why the mining companies are interested in these technologies. The actors of themining industry can be found to have a vision for the future mine, a production with ahigher degree of digitization and resemblances to a factory.

Today we live in a world where the demands increase in the aeronautics industry. This creates a situation where no mistakes are allowed about the regulations and for those who are supposed to follow these. Safety comes first, tracking of components, Service Bulletins which are recommendations from the manufactures and Airworthiness Directives which are demands from the authorities, these need to be updated at all time and everything that is done on a aircraft need to be documented.This creates a situation where today maintenance shops need to have full control of all parts of the organization, which creates a need for a working data system.The goal with this exam work is to evaluate the best way to implicate the new bought data system called "System Aircraft Management" on the basis of the needs of Täby Air Maintenance AB. The system are supposed to get started technically and also be implicated to the users of the system. This work will be focused to create a effective working plan to get SAM implicated with no interruption in the daily work.

In relation to the paradigm shift that took place between the marketing mix and relationship marketing, and the emergence of information technology in the 90:s, the Customer Relationship Management (CRM) has become a frequently used concept in marketing. Most definitions and approaches have been generated from previous studies, but the concept is still criticized for the number of failed implementation attempts. Along a discussion of the area has an elaborate theoretical foundation remained as the foundation for the study development and utilized in all the sections of the study. The study, with help from Gartner's eight building blocks of CRM, focus on how Swedish medium and large companies work with CRM, and if this is an indicator of the number of failed implementation attempts. The survey consists of two approaches, qualitative and quantitative, to provide both depth and generalizability of the study.

The purpose of this study was to analyze the level of the uniform way of interpretation from the Swedish asylum officers at the Swedish Migration Board, of asylum investigations for asylum seekers who claim sexual orientation as reason of refuge. The interviews with the officers were analyzed in relation to the policy document with investigation- guidelines and methodology.The results of the study showed that there was a uniform way to conduct asylum investigations and interpret the policy document, this despite that the document was found to be ambiguous in certain aspects. The uniform interpretation of the asylum officers was explained by the knowledge and understanding that exists within institutional organizations. This because the asylum officers at the Swedish Migration Board might have similar experience, knowledge and also the demands related to asylum investigations.The uniform interpretation demonstrated a strong similar common understanding of investigative work within the agency. This suggests a certainty that the investigations are carried out in a similar way regardless of which asylum officer within the institution conducting the investigation which indicates a well-functioning ?rule of law? for the asylum seekers. .

Målet med detta projekt har varit att, till en ny digital handelsplats, ge ett förslag till en implementation av MongoDB, med tillhörande REST-API, för hantering av användar- och annonsdata. Förslaget ska innebära en prestandaeffektiv och säker databas med möjlighet till framtida skalning, tillsammans med ett API för klientkommunikation med hantering av relevanta förfrågningar mot databasen. Prestandan av databasen handlar främst om att i förslaget ange vilka olika former av indexering som bör implementeras, tillsammans med ett förslag till relationsmodell, och vad detta ger för positiva och negativa effekter på systemet. Denna prestanda bör även återspeglas till största möjliga mån i API:et genom att utnyttja den indexering som väljs på bästa sätt. Säkerhet och skalning diskuteras under arbetet för att ge ett förslag på hur detta bäst hanteras för minimera riskerna för dataförlust, samt minimera nedtiden av databasen vid en eventuell framtida skalning.

The aim of this study is to describe how a theme about vitamins and analytical chemistry can be planed and implemented in a summer research school managed by AstraZeneca. The description of the theme is intended to be used as an instructor?s guide to upcoming summers-research-schools with the same theme. The students, which participated in the summer school of 2007, went to upper secondary school. During the summer school they were going to investigate the content of vitamin C in different fruits and vegetables.

The problem being examined is the disturbing noise that is created in an open plan office on a company working with a creative process, such as a newspaper or a communications agency. The purpose of this study was to examine the needs for today for a sound absorber in open offices and create and design a design proposal. The aim is also to develop a marketing material the product proposal. The problem has been broken down into the following questions:- How does the user look at the need of a sound absorber in an open offices solution today?- Does an interior designer apply sound absorbers when they furnish the intended environment? - How can a design that meets the needs that exists be achieved and to speak the user?The study is based on three choice of methods a literature review on selected topics that relate to the topic, an interview with an interior designer to explore how an interior designer applies absorbers in open plan office and finally an extensive survey that treats the user's needs and appropriate appearance for the product proposal.The design process has undertaken the following methods, design brief, requirements specification, functional analysis and sketches to produce the final product proposal.

Title: Social media as a communication tool - A case study on social media influencecorporate cultureLevel: Final assignment for Bachelor degree in Business and EconomicsAuthor: Jessika Klintsbacka & Oskar BergeSupervisor: Pär Vilhelmsson, Ernst Hollander & Maria Fregidou-MalamaDate: 2014-06-13Purpose of Study: The aim of this study is to inquire into Swedish companies internalcommunication, their approach to social media as an internal communications tool, and if itaffects the corporate culture.Method: The study is a multiple case study with a qualitative research design. The study'sinterview questions were designed by a operationalization of based on theory in the areas ofinternal communication, corporate culture and social media. The interviews took place inApril 2014. The interviews were recorded and then analyzed to bring out the similarities anddifferences between the companies.Results & Conclusion: The study shows that Swedish companies corporate cultures haveconnections with internal communication, and implementation of social media as acommunications tool. The study found that connections to companies with a comprehensiveone-way positive consider social media as alternative communication tool to strengthen theunity and community within the company.Suggestion for further research: One of the study's three companies is owner-led and thiscompany showed a high level of corporate culture.

To reach an Ecological Sustainable Development, Sweden has established environmental quality objectives. Green spaces are attractive for exploitation and in Sweden the access to large jointly green spaces has decreased, which has impact on humans recreation and the biodiversity. The economic aspect has great impact on the planning process which gives indications that the environmental objective may collide with other sector goals within the municipality. The thesis overall aim is to see how the management by objectives for the green spaces implements and how the green spaces is handled in the planning process in a specific case. The thesis builds on a content analysis, strategic interviews and a case study.

The problem being examined is the disturbing noise that is created in an open plan office on a company working with a creative process, such as a newspaper or a communications agency. The purpose of this study was to examine the needs for today for a sound absorber in open offices and create and design a design proposal. The aim is also to develop a marketing material the product proposal. The problem has been broken down into the following questions:- How does the user look at the need of a sound absorber in an open offices solution today?- Does an interior designer apply sound absorbers when they furnish the intended environment? - How can a design that meets the needs that exists be achieved and to speak the user?The study is based on three choice of methods a literature review on selected topics that relate to the topic, an interview with an interior designer to explore how an interior designer applies absorbers in open plan office and finally an extensive survey that treats the user's needs and appropriate appearance for the product proposal.The design process has undertaken the following methods, design brief, requirements specification, functional analysis and sketches to produce the final product proposal.