The aim of this study was to develop a simple model for calculating stock costs for bio fuel at Billerud Karlsborg and subsequently recommending a suitable stock level of bio fuel. The stock components considered in the model are GROT (branches and tops), bark, dry wood chips, raw wood chips from barking and sawdust. The calculations are based on a probability distribution of historical deviations between ordered and delivered volumes. The model presents two different ways to manage the supply in case of irregular deliveries. The first way is to stock enough volume to cover the deviations and the second way is to compensate with a quick purchase from the spot market (at extra high purchase prices).

The intention is to focus on the implementation of the tablet in preschools and how the intentions around the introduction of the tablet take shape in different preschools. The method is semi structured interviews where the respondents consist of 3 preschool directors and 6 teachers where the preschool directors work. This is a relevant subject to illustrate, as the tablet has become a tool in preschool where it seems to be different opinions about how it should be used. This study aims to understand how the implementation can take form in different preschools, what kind of similarities and differences we can see with the intentions of the tablet and if there is need of clarification on the workings of the tablets in preschools. The results show that the intentions around the introduction of the tablet in preschool look different in the preschools, and the implementation of this new technology starts in a small scale with help of photographing and videotaping.

This thesis examines the emissions costs of Swedish aviation and their degree of internalisation under current economic instruments. The results show that the degree of internalisation spans from practically zero for a long-haul flight to 6 per cent for a typical domestic flight, where the climate cost, including high-altitude impact, makes up the main part of the cost. To inform evaluation of the consequences of this underinternalisation, or attempts to correct for it using price instruments, the price and income elasticities of international leisure air travel from Sweden are estimated using household expenditure data and two different price measures. The resulting elasticities are very high ? 2.03 or 2.04 for the income elasticity and -2.53 or -1.88 for the price elasticity ? and should be interpreted cautiously due to data limitations, especially for the price elasticities.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

AimThe aim of this study is to through managers in eldercares deskriptions of the systematic qualityleadingsystem examine the implementation process of this system in the eldercare in the municipality of Halmstad.  BackgroundIn this paper the background explains elderly care and social work context, leadership in change and implementation processes. The theoretical frame illustrates Vedungs implementation theory and Webers model of bureaucracy MethodTo collect empirical data for this study, a qualitative research design was used in which eleven managers within Halmstads municipality home care management stood as respondents. ResultThe respondents highlighted a variety in the use of the systematic quality management system tool. The result describes that several obstacles were experienced in the use of the systematic quality system. ConclusionBased on the descriptions the respondents gives of the implementation process of the systematic quality management of Halmstad municipality home care management, the conclusion can be drawn that the implementation process has not resulted in the employees making use of systematic quality management in practice. The systematic quality management system that will ensure the quality of the care work is thus used to a limited extent..

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

Background: Markets in Financial Instruments Directive, MiFID, was implemented in Swedish law in 2007 and aimed to increase competition of the securities market in order to achieve efficiency and lower transaction costs and to enhance investor protection. Another aim was to increase confidence in the market. After the implementation of MiFID some doubts had been highlighted regarding its intentional effects. This evoked the authors? interest to examine the directive?s effects and its impact on investors? trust.Aim: To examine how various participants in the Swedish securities market experienced changes since the implementation of MiFID in 2007, and its impact on the securities market and minor investors' trust.Method: The study applied a qualitative method with a deductive approach to describe, interpret and understand the problem area.

The Purpose of the study was to highlight the primary care managers' perception of the barriers and opportunities in the implementation of the national guidelines for harmful drinking and alcohol abuse in KalmarCounty. The data was collected by questionnaires which were directed to all primary care managers in the county. The response rate was low, 40%. The data collection was complemented at a later stage with a non-response analysis. To analyze the results implementation theory with following terms were used: wants to, understand and know.

AbstractVäxjö University, School of Social SciencesBachelor thesisTitle: Varför en rädsla för alternativmedicin? En studie om hur EU?s kosttillskottsdirektiv har implementerats i Sverige.Author: Annica BlomstrandSupervisor: Anne Haglund-MorrisseyThe aim of this study is to investigate the process of legislation and implementation of the directive of the European Union on the food supplements, focused on member state of Sweden.There are two questions in this study: What was the process of legislation in the period when the Directive on the food supplements became established? and How does the implementation of EU?s decision on the food supplements works in reality? In order to answer these questions, two different methods were used. One was qualitative analysis of the available text and the other one case-study (qualitative including interviews)The conclusion is that the implementation has not been successful. The process of legislation has followed its traditional way, which in its turn did not leave so much space to the thorough implementation of the Directive. Unfortunately, this is a process that overlooks citizens and countries with different premises, affected by the decision.Keywords: EU, kostillskottdirektivet, lagstiftningsprocessen, implementering, organisationsteori, fallstudie.