Sweden has a growing proportion of children living in a multilingual environment. It is thus highly important that caretakers as well as professionals who meet these children have knowledge of multilingualism and its impact on language development. Also, an increase of referrals of multilingual children with suspected language impairment to speech and language pathology clinics is seen.The objective of this study was to investigate the linguistic ability in both Swedish and Arabic in a four year old child with suspected language impairment. A further aim was to implement an intensive intervention and evaluate the efficacy of it. Language testing in both languages showed that the boy?s greatest need was in the lexical domain.

High levels of ammonia in grass silage have been up for discussion by Swedish advisers. One reason is that it is more difficult for the rumen-microbes to utilise high levels of ammonia. A low level of ammonia is also good because if the cattle can use more of the protein in the silage, they don?t need so much protein concentrate. That is very good for the economy at the farm, and it is also good for the environmental problems caused by high levels of ammonia. In this project, 24 samples of silage have been taken at 20 different farms in the south west of Sweden.

This bachelor thesis in mechanical engineering was performed during the spring2015 in collaboration with Composite Consulting Group in Laholm. TheComposites Consulting Group works mainly with design and details of differentcomposite projects, their main area is FE-calculations, 3D-modelling andmechanical tests with composite materials.The aim of this bachelor thesis was to simplify the calculation process of solidmechanics for sandwich panels by simulation with computer software. The goalwas to decrease the time for the design and calculation process of the constructionand the cost of the practical tests. Our task was to build a static three dimensionalmodel with the computer software Abaqus, where the result should correspondwith the practical pressure tests in laboratory.The project started with collection of material data from Composites ConsultingGroup and by learning the software Abaqus, simultaneously a specification wasdeveloped in corporation with the company. Later on, a static wheel pressuremodel in the software Abaqus was produced which simulated the behavior of thesandwich panel during static wheel-pressure by a pallet truck.

Goodwill är ett omtvistat ämne inom redovisning. I dagens samhälle har företag haft friheten att kunna välja vilken regel i anknytning till goodwill de vill använda och det med hänsyn till vilket resultat de eftersträvar. Våren 2004 offentliggjorde International Accounting Standard Board en ny standard, IFRS 3 för redovisning av företagsförvärv. IFRS 3 går ut på att goodwill inte längre är föremål för planenliga avskrivningar utan istället ska företag genomföra ett ?impairment test? som innebär att företagen genomför en ingående analys av goodwillvärdet årsvis.

During this master thesis, wear and friction properties for the high-temperature alloy Kanthal APMT were studied. The results were also compared to 253MA. The initial tests showed, among other things, that the surface fineness of the muffle tubes matters in real applications like conveyor belts. A 253MA-sample wear-tested against a 253MA-tube showed lowest wear at 900°C while a pre-oxidized APMT-sample wear-tested against a APMT-tube had the lowest mean value of the friction force at 1100°C, compared to all other tests..

The aim of this study was to find possible relations between behaviour and physiology for puppies during different parts of a puppy test. This work deals mainly with the physiological part of the study. Thirtysix puppies, från five litters, were tested in a behaviour test where heart rate was measured and saliva samples were collected before and after each part in the test. Saliva and urine samples were analyzed for corisol concentration as an indicatior of stress. The tests were performed during two consecutive days in the breeders' home when the puppies were seven weeks old. In addition, heart rate and cortisol levels were also measured in the bitch since we were interested in finding out if there were any relations between physiological levels in bitches and puppies.

Purpose: The purposes of the current study were to investigate whether there were any differences in the perceptual ability between professional and non-professional ice-hockey players and whether professional players are better at distinguishing, paying attention to and concentrating on what is important during intense physical activity. Method: Twenty male ice-hockey players (10 from both the Swedish first and third divisions) participated in the study. Wingate test were used for physiological measurements while three psychological tests were presented in front of the participants. Stroop, Flanker and Fast counting tests were used to measure perceptual and coping abilities during intense physical activity and the differences between the two groups. Results: Fast counting and Flanker word 2 tests showed a significant difference between the two groups, whereby the professional groups was faster and more accurate than the non-professional group in answering.

This thesis describes a further development of an existing prototype named Automatic pin bone remover. The further development was requested from the Swedish consulting firm ATM AB. The request of automatic pin bone removers is high and has the potential to be a worldwide leading product.The goal with the thesis work is to further develop an existing prototype. In order to achieve the goal a pre-study of the prototype had to be made in order to define a customer demand specification. The thesis work is then continued by a function analysis which differs from a conservative one.

This paper explores the interaction of children with language impairment (LI). The present essay is a conversation analytic study of child-child and child-therapist dyads. The aim was to explore in what ways children with LI reach common understanding. Another purpose was to investigate if there are differences in interaction between dyads with children with LI and dyads with children with LI and speech language therapist. Seven children, three girls and four boys, with LI participated in the study.

One of the largest work areas for speech and language pathologists is intervention for children with speech and language disorders. The purpose of the present study was to describe and analyze the clinical management of language impairment in children by studying and comparing medical records and literature from the years 2000 and 2009. The present study is a sequel to two previously published papers by Christina Samuelsson (1997; 1999), in which medical records and literature from the 1920-, 60- and 70?s were studied and a paper by Helén Sämfors (2001), in which the years 1985 and 1995 were studied. The medical records used in the present study came from a medical ward for speech and language pathology at a university hospital in Sweden. The results showed that significantly more children were referred to the clinic for speech and language problems in 2009 than in 2000, and more children were treated for their impairments.

The main topic of this thesis is to evaluate the impact on the usability of web pages when using responsive web design, a concept for developing web pages whose design adapts to the screen size being used. This is done by creating a responsive prototype based on an existing web site. A number of usability tests are conducted on the two versions of the site in order to compare the time to complete the tests and to observe the behaviour of the test participants. The tests are conducted on desktop as well as on mobile devices with varying screen size.The number of test participants was relatively low, and so the quantitative result is not statistically valid. However, the conclusion is that the most effective combination is to use either of the sites on desktop format.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

While reading in deaf children has been the object of a number of studies, the reading abilitiesof children with mild and moderate hearing impairment and their relation to cognitiveprocessing have not received very much attention. Predictive factors of reading ability inhearing children are well known, with phonological and working memory abilities beingnecessary prerequisites for reading development. Existing studies suggest, however, thatcertain hearing-impaired children achieve a reading level comparable to that of hearingchildren in spite of impaired phonological abilities. In the present study, reading abilities anda range of cognitive processing abilities were measured in a group of hearing-impairedchildren and compared with hearing controls in equivalent school grades. Comparisons weremade at group and school-grade level, and the cognitive profile of hearing-impaired childrenat level with controls (those being within one standard deviation) was discussed.

This study highlights the differences in articulation, nasality and intelligibility between twenty 16-year-olds and thirteen 19-year-olds born with isolated cleft palate and control groups. The test groups are compared in a longitudinal perspective and based on earlier evaluations of velopharyngeal impairment. Significant differences were found between test groups and control groups using quantitative comparisons based on SVenskt Artikulations- och Nasalitets-TEst and NasometerTM. The longitudinal comparison also showed a positive but not significant development of the speech. Differences emerged in the comparisons based on velopharyngeal impairment but no significance analysis was made.

This master of science thesis is focusing on how the fault handling on hardware connected toa control unit on a Scania vehicle is working. To the hardware counts buttons levers, sensorsand CAN. The work has been concentrated upon how the fault handling is working and if it ispossible to find any new fault modes.The control unit that has been studied is called the Coordinator and is the core in Scanias threenetworks of control units. The Coordinators work is to transmit messages between the threenetworks and to process signals from buttons, levers and sensors. The values is then usedinternally or is sent to other control units on the CAN networks.