Blast furnace is the heart of every steel plant. Steel production is based on the blast furnace process, as it is where the iron is extracted from the iron ore and turned into liquid iron, which will subsequently be used to make liquid steel. Therefore, without hot iron, steel can not be produced. Blast furnaces in this process are supplied among others with pulverized coal. Raw coal should be prepared for the blast furnaces in the form of fine coal powder.

This is a final thesis done at BT, considering one of their forklift truck models called Reflex. The first part of this report is about a preliminary investigation investigating what kind of diagnostic systems BTwants to use, and also which demands there are to meet all expectations on such system. Secondly a diagnostic system, which will show if the drive wheel is worn out, will be presented. In the preliminary investigation, two kinds of diagnostic systems were mentioned. These were Model based diagnosis and Predictive analysis.

With the advance of the modern information society, the importance of reliable identity authentication has increased dramatically. Using biometrics as a means for verifying the identity of a person increases both the security and the convenience of the systems. By using yourself to verify your identity such risks as lost keys and misplaced passwords are removed and by virtue of this, convenience is also increased. The most mature and well-developed biometric technique is fingerprint recognition. Fingerprints are unique for each individual and they do not change over time, which is very desirable in this application.

AbstractThe research project Liberation, supported by the European Commission under the Environment and Sustainable Development Programme (Fifth RTD Framework Programme) aimed at developing a decision support system for ecological risk assessment of contaminated sites has proposed a tiered system including the triad method. This method integrates contaminant chemistry and bioavailability analyses with observed ecotoxicological effects in soil and groundwater. In this study the triad method was used to perform a risk characterization of a former surface treatment and metal industry, now used for the student union buildings of the Mälardalen University in Eskilstuna, Sweden. On the site, high concentrations of copper, zinc and nickel have been detected in the soil in a preliminary investigation of contaminant levels with XRF. For performing the risk assessment of the site according to the triad method, contaminant bioavailability, soil metal concentrations and soil toxicity were determined and an ecological assessment was carried out on four selected soil samples (one reference soil and three samples with low (B), medium (C) and high (D) contaminant levels). Contaminant bioavailability was measured through leaching (ISO TC 190/S7) and biouptake tests (DGT).

This M.Sc. thesis is a material application evaluation commissioned by the advanced body engineering department at SAAB Automobile AB. The purpose of the thesis is to evaluate implementation of the innovative sandwich design material Hybrix into an automobile body. Today the most commonly material used in the body is galvanized steel sheets and by shifting material to Hybrix several problematic issues have to be dealt with. Hybrix is an innovative sandwich sheet that inherits thin stainless steel face sheets and a stainless steel fibrous core.

In the process laboratory of Metso minerals (Sala) AB, continuous tests have been made with a laboratory unit High-Rate thickener. The tests are made in order to compare three methods of thickening techniques of suspended solids. The three techniques are High-Rate thickening, conventional thickening and lamella thickening. The High-Rate and the conventional trials are based on a continuous method, while the lamella thickener is based on batch trials. Because the lamella thickener is based on batch trials and there were some optimization problems with the adding point of the flocculant at the continuous trials, it was not feasible to compare the lamella thickener with the other two thickener types.

Från och med år 2005 är det obligatoriskt för alla noterade bolag inom EU att redovisa enligt IASB:s standards, IFRS/IAS. En väsentlig skillnad mot tidigare normer är att goodwill inte längre skall skrivas av planenligt, istället skall bolagen göra så kallade ?impairment test?, eller nedskrivningsprövning. Ett impairment test innebär att bolaget per varje balansdag eller oftare skall bedöma om det finns någon indikation på att en tillgång kan ha minskat i värde.Oavsett om det finns någon indikation på en värdeminskning eller ej, skall företaget varje år göra en prövning om en immateriell tillgång med obegränsad nyttjandeperiod har minskat i värde genom att jämföra dess redovisade värde med återvinningsvärdet.Syftet med min uppsats är att undersöka huruvida noterade holländska bolag efterlever kraven som ställs från standarden IAS 36 p 134. Resultatet ska jag sedan jämföra med en liknande undersökning som tidigare gjorts för bolag noterade på Stockholmsbörsen.

District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

This report describes procedures and preparations made for developing a mobile application.Using a questionnaire and usability tests, I have developed a design document for a parkingapplication for the iPhone 4. The purpose of the application is to help drivers find allowedparking spaces thus making roads safer for everyone while the driver avoids parking tickets..

In Sweden, grass is the single largest crop grown. Nearly 1 000 000 Ha grows on the fields, this is primarily used as feed for livestock. To get a good seed, you need to handle the crop carefully from planting to delivery. The part that I have been interested in, is how to dry the harvested seed with out destroying the growth in the small seed. This is very easily done if you aren?t careful during the drying period.

The current study aimed to test the public self-consciousness impact on creative performance. An experimental design was used in which 40 participants were randomly assigned to two groups, one of which was the experimental group and the other was the control group. A mirror was used in the experimental group to induce public self-consciousness among the participants while they performed creativity tests. A consequence test was used where the participant had to give suggestions for the given scenario "What would happen if everyone became blind?" which was then measured in the number of proposals (fluency).

The aim of this study is to investigate how the Swedish language proficiency of pupils in vocational programmes in 1977 was measured and assessed with the aid of a national achievement test, and to investigate whether vocational pupils today, in 2014, have similar language proficiency to that of pupils in the 1970s. The study also discusses how the design of the national achievement test from 1977 reflects the view of knowledge that prevailed in society and in the policy documents. The material for the study consists of a total of 75 national achievement tests, 40 of which were taken by pupils on a vocational programme in 1977 and 35 by pupils on a vocational programme in 2014. The national achievement test consists of two parts, the first of which focuses on isolated elements of language proficiency, while the second involves free text production. The material was analysed quantitatively in accordance with the correction material from 1977.

 Background: Earlier studies show that 30-92 % of ACL reconstructed return to their pre-injury physical activity. It is not clear why some people do not return.Purpose: The purpose of this study was to investigate the return rate to pre-injury sport among ACL reconstructed men. Another purpose was to characterize those patients who return and those who do not.Metod: A Web-based questionnaire with questions about returning to physical activity was sent out during the spring of 2012 to 93 men who had undergone an ACL reconstruction 6-40 months earlier and who, after 6-40 months after surgery, were evaluated with validated strength tests and self-assessment outcome measures.Results: At 12 months after surgery 56 % of the subjects had returned to their pre-injury sport. If the criteria were set higher ?back to the same- or a higher level? 14 % had returned.

Cultural relict plant species from the Nordic countries have been collected by the Nordic Genetic Resource Center (NordGen) for the purpose of conservation. To ensure high seed vitality in store, regular germination tests need to be conducted. It is important to get a correct viability status, but the knowledge of seed dormancy in the cultural relict plants is often poor. The objective of this study was to investigate how seed dormancy is affected by cold stratification. The study includes 31 accessions from 28 species with the purpose of establishing germination protocols.

The current study aimed to test the public self-consciousness impact on creative performance. An experimental design was used in which 40 participants were randomly assigned to two groups, one of which was the experimental group and the other was the control group. A mirror was used in the experimental group to induce public self-consciousness among the participants while they performed creativity tests. A consequence test was used where the participant had to give suggestions for the given scenario "What would happen if everyone became blind?" which was then measured in the number of proposals (fluency).