An investigation of the heat impact of laser cutting on the material properties when producing tensile and Impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and Impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and Impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and Impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

In this paper the authors aim to examine the effects on consumers using different strategies in a campaign within social marketing. A model by Evans et al (1996) has been used in order to see the different steps in which advertising catches the viewers? attention and eventually leads to action or purchasing. However, in the case of this thesis, the intention of the chosen campaign is to change the consumers? attitudes and behavior towards alcohol.

Test is an area in system development. Test can be performed manually or automated. Test activities can be supported by Word documents and Excel sheets for documenting and executing test cases and as well for follow up, but there are also new test tools designed to support and facilitate the testing process and the activities of the test. This study has described manual test and identified strengths and weaknesses of manual testing with a testing tool called Microsoft Test Manager (MTM) and of manual testing using test cases and test log templates developed by the testers at Sogeti. The result that emerged from the problem and strength analysis and the analysis of literature studies and firsthand experiences (in terms of creating, documenting and executing test cases) addresses the issue of the following weaknesses and strengths.

To become a successful athlete requires several different components in which one of themost significant is the ability to develop their own physical strenght. What weight exercises has the best transfer effects for skating?Participants in the study were 20 male senior hockey players from Div. II in the Västra Gö- talands Regionen in which all participants had at least 10 years of hockey experience.Test subjects had to perform a five-minute individual warm up followed by an opportunity to familiarize with the upcoming exercise. The first on-ice test was a 35 meters sprint test and the second test was an S-cornering agility test.

Test bench for air bearingsThis thesis work consisted of bringing forward and defining the test parameters relevant for a test bench and constructing a test bench that can test and verify the largest existing air bearings that are of use in Micronic Laser Systems AB machines. Because the knowledge about air bearings is limited it is thought that with the help of the test bench the knowledge would increase and in that way improve the air bearings.After learning more about air bearings and their purpose at Micronic Laser Systems AB, I started the concept phase for the test bench. For each part in the test bench I consulted my two tutors, Torbjörn Hedevärn and Johan Bergqvist, at Micronic Laser Systems AB. The final concepts where documented as 3D-modells in Solidworks and some of them have been tested in Solidworks FEM-program.The test bench is designed so that, with the help of a pneumatic cylinder, 25 kilo weights are placed on the air bearing to test its stiffness, damping and the pressure performance under its surface area. To test these parameters the test bench has to have a pressure meter, accelerometer and a microcator.

This paper investigates the usability of the intelligence test Wechsler Nonverbal Scale of Ability (WNV). Twenty four children in two different age-groups were tested with WNV, 10 children between ages 5 - 6, and 14 children between ages 9 - 10. The WNV turned out to be a useful test when some verbal communication was used in the test situation. This was especially apparent among the younger children, who needed extra verbal instructions and verbal support through the different subtests. The test also contained standardized verbal instructions for all ages.

This essay examines if formative assessment causes any impact on upper secondary school students results in social science. Other questions asked are which group of students benefits most from formative assessment and if any connections can be found between the students result and their cognitive approach to learning, problem solving capability and attitude to school.Two classes from a school in Stockholm were chosen to participate in the study. The theoretical framework is mostly based on former research performed by Black and William (1998, 2003). Multiple methods were used, including an experiment with a parallel-group design with two groups, a survey and a problem solving test. Statistics is used to describe and analyze collected data.Both groups were taught during five lessons in the same field of knowledge with the same kind of teaching, apart from formative assessment.

It is well proven that physical exercise has an impact on our bodies as well as our minds. The aim of this study is to examine if this impact also affects economic behaviour. Three hypotheses regarding the impact of acute exercise on overconfidence, risk enhancement and well-being have been tested by collecting questionnaires from 364 participants at Friskis & Svettis, Kungsholmen who all were asked to answer the questions either before or after exercising. The differences between the before and after group were analysed, indicating small increases in all three test areas after exercising. These increases were, however, not large enough to reject any of the null-hypotheses of zero effect on the given five per cent significance level.

A personality test is a useful tool in recruitment contexts. Studies have shown that participants distort their answers in a socially desirable manner. The purpose of this study was to investigate if people respond more or less socially desirable depending on how they rate themselves in a personality test, based on the "big five" personality dimensions.Eighty people, (40 women and 40 men), 19-42 years, (M= 24,1 SD= 3,76) rated themselves on a personality test. Group one, (20 women and 20 men) completed the test on paper. Group two, (20 women and 20 men) completed the test verbally.

The main topic of this thesis is to evaluate the impact on the usability of web pages when using responsive web design, a concept for developing web pages whose design adapts to the screen size being used. This is done by creating a responsive prototype based on an existing web site. A number of usability tests are conducted on the two versions of the site in order to compare the time to complete the tests and to observe the behaviour of the test participants. The tests are conducted on desktop as well as on mobile devices with varying screen size.The number of test participants was relatively low, and so the quantitative result is not statistically valid. However, the conclusion is that the most effective combination is to use either of the sites on desktop format.

This is a study of the national test in 3rd grade. The national test is obligatory and is conducted in 5th and 9th grade, but since the spring of 2009 the tests also become mandatory in 3rd grade. The case study of this research is to find out how children in 3rd grade perceive the purpose of the national test. The survey should also clarify how students think and feel about the national test, and how they feel before the national test and after they have finished writing the test. Has the test positive or negative influence on children? The survey will also show how much teachers clarify what the significance of the national test is for the students.

The smartphone is part of our daily life. Smartphone users type on a screen area that is no larger than the palm of a hand. To help with this endeavor the software known as AutoCorrect was created. However little is known about how AutoCorrect actually change the language and if AutoCorrect users at all perceive the impact it has. This study aims to find out if our test subjects are aware of AutoCorrect?s presence and how much it influences them.

Thesis purpose: The aim of this paper is to extend the knowledge of what influences the purchase decision of functional food in the store. By applying the M-R model in a new setting - the dairy department in grocery retailing in Sweden - and adding variables related to health attitudes, the aim is to contribute to existing research concerning in-store purchase decision making and store environment as well as consumer attitudes. Methodology: This thesis employs a quantitative strategy with a deductive approach and data has been collected with questionnaires. Theoretical perspective: Environmental psychology serves as an overarching framework where, more specifically, certain aspects of store atmospherics and some variables concomitant to health attitudes provide the theoretical base. Empirical data: The empirical data consists of customer purchasing a functional food product, Proviva, and this is contrasted with a test group, Bravo.

Swedish students' knowledge of both mathematics and reading comprehension has deteriorated in recent years. Scientists are discussing whether there is a connection between these areas and that the pupils deteriorating math skills may have something to do with their increasingly lower results in terms of reading comprehension. To investigate this possible connection, I conducted a survey among students in ninth grade and have come to the conclusion that the scientists are right: this connection absolutely exist. Students who received a high score on tasks designed to test students' mathematical problem-solving skills, also received high results on the reading comprehension test. And students who received a poor performance on the problem-solving tasks, were also low performers in the reading comprehension test.