Sök:

Sökresultat:

9288 Uppsatser om Idea fruition process - Sida 54 av 620

Fallstudie av produktionschefers ledarskap

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

Allmänhetens involvering i planeringsprocessen : En studie av två olika metoder för gatuundersökningar

It might seem obvious that public opinions should be included in the planning process. However, it is not clear to what extent. Statutory forms of public participation attract little interest since many people feel that it is hard to make a difference. The purpose of this study was to engage those that normally do not get to speak their mind in the planning process. In this study, two methods for conducting ?on-street surveys? were investigated.

Live slow motion: from idea to product

Vi ville undersöka om det var möjligt att på en begränsad budget bygga och programmera en Live Slow Motion-maskin för att generera repriser under en TV-sändning. Utan tillgång till dyrare specialtillverkad hårdvara skulle allt skötas i mjukvara på i grunden en vanlig konsument-PC. Vi ville så långt som möjligt att vår maskin skulle efterlikna de etablerade produkter som används i TV-branchen då vår förhoppning var att maskinen skulle kunna utnyttjas av TV-studenter efter färdigställandet. Vi ville dock inte begränsa oss för mycket, utan vi skulle försöka förbättra de saker vi ansåg behövde förändras..

Pragmatikens seger över teorierna : Utbildning som maktmedel eller emanciperande kraft Pedagogisk teori & praktik i Sverige under perioden 1600 ? 1800

The purpose of this thesis is to discuss education as a state tool in Sweden during the 17th and 18th century. The idea is to contrast the pragmatics of the Swedish education system with the theories of Rousseau and Comenius. The thesis is marked by the thought that theory and application diverse because of the subversive infusion in the ideas of the theoretic.The results shows that it is ultimately a question of public education and its potential. The state recognises the potential of public education but also its dangers and therefore becomes very active in forming not only the education system as a hole but also its pedagogic.

Project EQS - Elektronisk växelreglering för motorcykel

Husaberg Scandinavia AB is a company producing and developing a range of motorcycles for both on- and off-road use. Husaberg provided the project group with a task of developing an entirely new way of operating the sequential transmission that can be found in today?s motorcycles. The target was to bring the product from idea to a functional prototype ready for further tests. Operation of the motorcycles transmission is today made by a foot pedal placed on the left hand side of the bike.

Hur kan mikroföretag bygga upp varumärken? : En studie av vilka faktorer ett mikroföretag kan använda vid uppbyggandet av sitt varumärke.

The purpose with this essay is to study how a micro enterprise builds a brand. This because the current situation makes it difficult to stand out from the vast amount of marketing messages available in the market without having an extensive marketing campaign. Small companies do not have the opportunity to put a lot of recourses as money into marketing as the large companies do. Neither do they afford to repair a brand failure.Brand building is a process that constantly is in progress in a company, large or small. To make this process concrete we have chosen to study the four factors; brand awareness, perceived quality, brand associations and brand loyalty.

Återuppbyggnad av en kollapsad stat - En fallstudie av återuppbyggnaden av staten Afghanistan

The purpose of this thesis is to explore and analyze the processes and efforts involved in rebuilding the war-torn state of Afghanistan. The examined period span from the fall of the Taliban regime in 2001, to the elections in 2005. This period, commonly known as the Bonn-process, sets out the initial time for the reconstruction of the state.A theoretical framework, which considers the necessary mechanisms for successful state-building, will be used to analyze Afghanistan's re-building process. The mechanisms include the prerequisite of a stable security environment, emerging from a cease-fire, together with the development of a well-functioning economy, re-introduction of rule of law and rejuvenating civil society.The failure to establish a secure environment has had a devastating impact on all analyzed aspects of the re-building process. It is therefore crucial that the international society continuing to assists the Afghan government in its efforts to strengthen its capacity, in order to improve the security situation.

Optimering av glödgningsparametrar för kromstål

At Sandvik Materials Technology, Argon gas is used as furnace atmosphere when heattreating hot rolled wire. Upon heating chromium steel wire, a rich oxidelayer forms on the wire surface. The abstract of this masters thesis is to enhance the understanding of the constitution of the oxidelayers and the influence of the furnace atmosphere. This will be achieved by performing a number of annealing experiments on laboratory level. Also, the aim is to understand the chemical reactions and physical mecanisms controlling the pickling process.

Från blankt papper till konsert

Syftet med den här uppsatsen är att jag vill dokumentera min kreativa process från första gången jag börja skriva nytt material, till att för första gången framföra det för en publik för att sedan utveckla till en hel (examens) konsert. Huvudfråga: hur fungerar min kreativa process och hur förhåller jag mig till den? Jag har använt mig av att skriva processdagbok under ett och ett halvt år. Jag har kommit fram till att jag i min kreativitet behöver vara strukturerad och ha ett visst mått av disciplin och rutiner och försöka hålla en distans mellan mig och mitt skapande och samtidigt våga vara öppen och driva processen framåt även om jag inte riktigt vet vad slutmålet blir.Min uppfattning om ordet kreativitet har också under arbetet med denna uppsats förändrats. Från att vara något abstrakt och mystiskt med en bild av att de som kallades kreativa var speciella människor, genier, som mer eller mindre hade en speciell gåva till en uppfattning om att kreativitet är en egenskap vi alla har som med rätt förutsättningar och sammanhang kan övas och utvecklas..

?? Så kom insikten om att jag var likadan som de. Att jag var spelberoende ?? : ? en kvalitativ studie med fyra före detta spelberoende, deras erfarenheter av att komma ur ett spelberoende

Title: ?? Then came the realization that I was just like them. That I have a gambling addiction?? This is a qualitative study of four former gamblers and their experience of getting out of the gambling addiction. The study is about how individuals have overcome a gambling addiction.

Är hälsa orange? : En kvalitativ studie av Norrbottens Läns Landstings byte av färg på Vårdcentralers logotyper i Norrbotten

Colours have been proven to have both a great physical and psychological impact on human beings. This essay investigates the rebranding of 37 Health Care Centers, located in Norrbotten, Sweden, and how 10 interviewees have experienced the new choice of colour on the logotypes of these Health Care Centers.The theoretical framework used in this research process, consists of theories related to rebranding, the communication process, encoding/decoding and Goethe?s Theory of Colours.To gather information about how the 10 inhabitants have experienced the new choice of colour, a semistructured form of interview was used. In addition to these interviews, three people employed by Norrbotten County Council (NLL) were interviewed, to get to know more about the rebranding process and the message behind the chosen colours of the logotype.Results show that the inhabitants had an overall positive reaction to the new colour choices, but that younger target groups lacked information about the new logotype and the rebranding.Due to these results, recommendations were made that NLL should expand the quantity of media channels to reach these younger target groups, and thereby be able to attract more patients to their Health Care Centers. NLL would also profit from investigating the inhabitants experiences related to the new colour choices themselves, but in a larger scale, to achieve greater knowledge of how to proceed with colour choices in the future..

Provinssnickarens poesi

I have studied and worked with various joints and interpreted twenty-six of them to small models. I then placed these into a template so that I could record the properties and their expressions.The protocol show what the joint looks like, and what its strengths and weaknesses are. Moreover, they are translated into a freer text, a poem, that describes what I think and feel about the joint.Based on the protocols, I have selected a number of joints which I then interpret into furniture. I have chosen to move forward in slightly different ways with different joints. Sometimes it is the expression of the joint that has given birth to a new idea, it may be the poem itself that led me on to a form, combinations of joints and that I found interesting, and so on.My interpretations are then further translated into new poems that describe what I see and what I feel when I assemble and disassemble each piece of furniture..

Processutveckling av borstgradning

During the milling of Sandvik Coromant?s world leading Drill with replaceable inserts,the CoroDrill880©, burrs appear around the milled surfaces. The burrs are removedusing different methods, one of which is deburring with special brushing machines thatare integrated into milling cells. The machines of the type Sinjet, use a Siemensguidance system. The deburring results are not satisfying and manual deburring isrequired afterwards.

Att införa Balanced Scorecard : en studie av en implementeringsprocess

Background: In our case study we have been studying a company that during the last seven years have tried to implement the control system Balanced Scorecard. They have during this period made three attempts. According to Kaplan and Norton, the creators of Balanced Scorecard, it should take about 16 weeks to implement a Balanced Scorecard. Purpose: Our purpose is to investigate which factors that influence the possibility to implement Balanced Scorecard. Method: We have conducted a case study where we have studied implementation at three levels in a company.

Långvarig ventialtorvård hos patienter med hög ryggmärgsskada- tid för urträning och bakslag i form av returer till intensivvårdsavdelning

Background: Patients with cervical spinal cord injuries are often dependent on a mechanical ventilator due to the damage on the innervation to breathing musculature. During rehabilitation they have to be trained to regain own breathing. This unweaning process may give respiratory complications, which are main causes to morbidity and death. These respiratory complications are traditionally treated in an intensive care unit (ICU), which means that the patients have to return back to these emergency units.Aim: To investigate number, length and causes of returns to intensive care units and the length of the weaning process. Further, to compare if a multidisciplinary approach to the weaning process may reduce ICU returns and to shorten the weaning process.

<- Föregående sida 54 Nästa sida ->