An increase interest of new methods and tools has begun to grow in the real estate business, this new trend causes an increase in new programs that aim to simplify processes of energy-efficiency and environmental issues.After consulting with Björn Alsmark from Bjerking AB, an architect and engineering company, we made a decision that the Degree Project is going to examine the program IES (Integrated Environmental Solutions) with some integrations from Revit Architecture application.To be able to examine IES, we got access to a completed project from Bjerking. The project is a nursery school in Uppsala. An application has been handed in from Bjerking to make this project to a Green Building-certificated project. According to Bjerking own calculations (with the energy-calculation program Enorm), the consumption of energy of the nursery school is 48 percent lesser than required by BBR.An evaluation of IES and Enorm has been made with an aim to compare these two programs and find out if IES is an appropriate program to replace Enorm. Does Enorm or IES come up to BBR´s recommendations?The Degree Project cover 15 ECT, that required several adjusting and delimitations, and the study sketch ended with a literature study.After finishing the study sketch the modeling of the nursery school began.

Powdery mildew is a serious problem in both field and greenhouse cucumber production and can cause serious infection and radically reduced yields. Today, powdery mildew is the main disease in greenhouse produced cucumber. Disease control should preferably be both efficient and environmentally friendly, which is not easy to achieve at all times. Alternatives to chemical control of powdery mildews are biological control, physical control, non-fungicide control and cultivation of resistant or tolerant varieties. Biological control can be described as the suppression of damaging activities inflicted of a harmful organism by one or more other organisms, which are called antagonists or natural enemies. In Sweden, there are currently no registered biological control products available to control cucumber powdery mildew. The aim of this study was to investigate the effect of two biological control products in order to evaluate their ability to prevent or reduce powdery mildew infection to an acceptable level in greenhouse produced cucumber. In the experiments, different application regimes were also studied.

The law (1988:870) concerning care of substance abusers is constructed in a way that gives the social workers room to interpret and apply the law individually. This may contribute to differences in treatment between female and male substance abusers. The purpose of the essay was to investigate whether the client's gender had any significance to how the social worker interpret and apply the law (LVM).The specific questions we worked around were:- What significance does the client's gender have in the decision-making?- Does the social worker's opinion about the law have any significance?- What factors can effect the social worker's interpretation and application of the law?- What importance do the social workers attach to prevailing norms about men and women when they interpret and apply the law?We chose to use a qualitative method to answer the above questions. Six social workers were interviewed and 39 LVM sentences were analysed.

Volvo Construction Equipment is a world leading company in construction machinery. Tomaintain the best products, development is prioritized. The master thesis regards sound reductionof the hydraulic system on a wheel loader. The background to the master thesis is asimulation made on the hydraulic system, performed autumn 2005. The result of the simulationshows that the energy of the pressure ripple is reduced when the paralleled hydraulicpumps are phase shifted and reduces each others pump pulsations.

This graduation thesis is about baths and beach like places in city centers. It focuses on recreation and the creation and development of public, social spaces in the city containing water as a visual and useable element. The thesis is divided into three parts; background, inspiration and application. The background examines four factors which we consider important for the occurrence of inner city baths; water, the history of bathing, inner city recreation and social life in public places. A discussion of the (future) importance of inner city baths and beach like places' is then presented. The inspirational part is divided into examples of existing places and examples of types of places. The first is used in an attempt to examine the function and importance of inner city baths and beach like places as well as the opportunities and challenges associated with them. The latter contains a presentation of six categories developed by us to facilitate the planning of inner city baths and beach like places.

The aim of this study is to examine the possibilities to use gamification to reach thepolitical goals for the transportation system in the Stockholm region. The study has aninterdisciplinary approach and is based around two main building blocks: gamificationand the transportation system in the Stockholm region. The first part examinesgamification. This includes contemporary use, debate, academic definition and aninvestigation of how gamified applications should be developed. One of the mainfindings is a suggestion that gamification should be seen as a process rather that a setof predefined game mechanics that can be applied to any activity.

From interviews with biology teachers and pupils, some important factors are presented that motivates and interests pupils in biology. Some of these are varied education, commitment of the teacher, narrative skill and individually reachable goals. Other important factors are practical application and connection to daily life, as well as actuality of the subject and pupils experience of the use of learning.Circumstance around teacher and pupils will influence which factors that has the most impact. It´s up to each teacher to make a decision which factors to be used based on his or her own qualities and depending on the group they will teach.Teachers and pupils agreed about factors that will cause an interesting lesson. The pupils emphasize that variation is the most important factor.

This report describes a project, which was carried out as a final thesis covering 30 ECTS during the final semester of the Master of Science programme Industrial Design. The assignment was issued by Fagerhults Belysning AB in Habo. The assignment was to design a family of products in which LED was to be used as a source of light. The main focus in the initial part of the project was to find a way to design the inside of armature which was suitable for LED technology. An armature, already in the range of products at Fagerhult, with the desired qualities that was to be strived after was the Zintra. The lighting source of the Zintra is a compact fluorescent lamp.

In part this paper is a contribution to the ongoing Swedish discussion about our public structures. The discussion has picked up speed in the last years thanks to a government backed committee trying to come up with a suggestion to make our public sector more efficient. A big part of the debate is about the independence and work of our municipalities, what they should do, what they shouldn?t do and when the state should step in and take over. I make a theoretical investigation into one of these issues, the one about job creation.

The purpose of this thesis is to analyze and propose improvements to the current procedure for cost estimations of purchased maintenance work at Banverket, the Swedish rail administration. This governmental institution is responsible for the procurement of maintenance services for the country?s railroad network through open tenders. Due to the generally low number of contractors, it is particularly necessary to establish accurate cost estimates in order to assess the offers and ensure that a fair price is being paid to the suppliers. Several flaws associated with the current practice are identified and analyzed according to cost accounting theories.

This thesis explores how the concept of ?legal corruption? manifests itself within the European Investment Bank with a modern approach to the theoretical understanding of anticorruption efforts. This approach conceptualises the idea of complementing theories based on contextual applicability rather than focusing on their competing qualities. The European Investment Bank (EIB), as the world?s largest multilateral lender, is an underexplored yet vital organ of the European Union, which has recently faced criticism for its alleged lack of transparency and dubious application of policy.

This report describes a project, which was carried out as a final thesis covering 30 ECTS during the final semester of the Master of Science programme Industrial Design. The assignment was issued by Fagerhults Belysning AB in Habo. The assignment was to design a family of products in which LED was to be used as a source of light. The main focus in the initial part of the project was to find a way to design the inside of armature which was suitable for LED technology. An armature, already in the range of products at Fagerhult, with the desired qualities that was to be strived after was the Zintra. The lighting source of the Zintra is a compact fluorescent lamp.

The purpose of this study is to analyse how a distribution and sale-network for quality softwood lumber should be designed to fit sawmilling companies? business concepts, and at the same time satisfy customer needs regarding delivery time and quality aspects. This thesis work is a case study based on a sawmilling and retail company in Sweden. AB Karl Hedin is a private owned sawmilling company with 500 employees. The company?s turnover is 1500 million SEK, it includes 4 sawmills, 16 builders merchants stores and a packaging company.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..