This study is preformed at Westbaltic Components placed in Töcksfors Sweden. Themain target in this study is to make one of the company?s assembly lines better andmore effective. The assembly line constructs vending machines for different stores allover Europe.It will contain tobacco, snuff, cigarettes and shaving blades and many more similarproducts.The first step in our study is to locate the daily problems and find out a good way toreduce them and make them disappear. A good way to do this job easier was toconstruct a visualizing board.

To increase the quality in their products ABB is working towards a cleared order concept. That means that all customer specified options are to be known before they start with order calculations and construction. As it is today they use paper checklists to achieve this. One order may have several reactors, and for a reactor there can be several different alternatives. For each alternative a new checklist must be filled out.As of today all reading of the customer specification and checklist fill in with is done by hand by different persons, and sometimes the same data is read more than one time.

Numerous studies have showed that Swedish municipalities are responsible for several of the activities that concern children and their rights, e.g. school and health care. Furthermore, the Convention of the Rights of the Child is an international agreement that Sweden has signed and ratified which also implies the obligations that Swedish municipalities have. The purpose of this study is to investigate and compare, from a social justice perspective, how children?s rights are being emphasized and how children?s opinions are being taken into consideration at the municipality level in Sweden.

Abstract During object-oriented system development, programming should be preceded by analysis and design to assure that the system fulfils the demands of the customer and simplify during the development phase and documentation. When modeling the analysis and design phases, several different notations may be used. One of these is the UML (Unified Modeling Language) which this thesis will cover. The aim is to compare the use of the UML i practice versus what is said in the literature. The investigation is built upon interviews at different companies to receive their reflections about the UML.

During the past decade Information Technology (IT) and Information and Communication Technology (ICT) have become the main tools in teaching. Authors and early educators who are treated in the study talks about how technology has come to change the school's approach to teaching and didactic tools. The technology has also affected students´ and teachers´ ways to work because the technology's versatility makes demands on the user's expertise and competence. The technical skills have long been associated as a male domain, where men are expected to master the technology´s versatility. These expectations are not the same for women.

The purpose of this Master?s thesis is to investigate what prompts student nurses to seek information required to their educational tasks and how they evaluate and utilize that information. The questions addressed in this thesis regard how information retrieval becomes part of student nurses? social practice; which physical and intellectual tools student nurses make use of in their education; and which mediating resources they use to perform their tasks. Roger Säljö?s sociocultural approach provides the theoretical framework for this thesis.

Eco-design is all about improving products environmental performances throughout the products lifecycle by including the environmental aspect into the product development process. There are a large number of different tools that can be used for this, but there are several factors that can affect which one will be the best to use. Some tools for eco-design takes comprehensive studies and can only be performed by experts, while some tools can be used more time- and cost efficient and with basic knowledge. The choice of tool should be based on the company?s situation.This report describes the research of how the design and furniture company Blå Station could include a tool for eco-design in their product development process.

A customer of Sekonden IT is to replace the current setup authoring process for a program called PropCalc with a new process based on a setup authoring tool with high quality and usability.The report aims at present a suitable setup authoring tool for PropCalc by making use of a structured evaluation process evaluate the setup authoring tools on the market.Olof Næssén presents a process for evaluating web frameworks for Java in his thesis Utvärdering av webbramverk för Java. The evaluation process is adapted in the report to generally suit evaluation of software. After adjustment to the evaluation process an evalutaion is performed evaluating the currently available setup authoring tools.The evaluation will show that the most suitable candidate for PropCalc is InstallShield Premier but that the candidate that is finally chosen is WiX..

Websites are often developed by small businesses, organizations or individuals which may lead to that the testing gets left behind; the focus is on getting a finished product that can be deployed as quickly and as cheaply as possible.Functional testing is important also for websites and a variety of aids exist. With the right tools and methods the development work is facilitated, and it leads to products with fewer faults.This report shows in the form of a case study how an appropriate tool for functional testing can be selected and how it can be used within development of a website. An analysis of the tools available is reported and JSystem is selected as the most appropriate for this case.It turned out that JSystem could not be used fully as intended in terms of deployment, but a well-functioning alternative solution was developed.A number of test cases were created without any unsolvable problems and JSystem performed well. In JSystem test cases in Java are created in Java, which gives a high flexibility..

As the speed and complexity of computers have increased so have software and the expectations of users. Software development follows a straightforward evolution where complicated tasks are made easier by better tools; this repeats itself as those tasks in turn are automated.Software mechanics that were seen as revolutionary a decade ago are seen as obvious requirements that no multimedia application can be without.dotNet is the next step in line and makes it easier and faster to build software.This report focuses on the development of a multimedia platform developed in dotNet. It does this by developing the tools and framework from which a complete game can be built.A game is selected because it combines the most aspects of multimedia development, such as interaction, graphics, sound & music. The report goes further by describing why the game looks like it does as well as the mechanics of the game and the benefits of the dotNet platform..

This study in the subject of forest planning is made for Sveaskog and its aim is to develop tools that prognosticate outcome in terms of volumes per sort from not yet cut forest stands. The degree of detail is just to get reliable results for at least one months volumes, for Sveaskogs own forestland in the market region of Norrbotten that is about 100 000 m3fub. The course of action to accomplish this is regression analysis and the data consists of cut tracts on own forestland in Norrbotten during the years 2006, 2007 and 2008. That is a little more than 4 million m3fub. Two tools were made.

This thesis was carried out at Atlas Copco Tools and Assembly Systems. The purpose hasbeen to develop a design tool to be used for development of new electric motors for AtlasCopcos electric nutrunners. The focus of the thesis has been to increase productivity bydecreasing the power losses in an electric tool. The productivity is defined as themaximum number of tightenings a nutrunner can perform without becoming too hot.Before starting the development of this design tool an existing Matlab script, whichcalculates the losses in a slotless electric motor, has been studied and modified torepresent the real losses in a better way. The modification has been made by performingpractical studies of different losses and then adjusting existing parameters in the Matlabscript.Because design changes in one part of a mechatronic system can lead to a decrease inperformance of another part the choice of parameters that can be changed has been madeso that other parts of the system is affected as little as possible.A study of the existing tools efficiency during an entire tightening has been made toincrease the understanding of when and where the different losses appear and to comparethe modified Matlab script with the measured values.The design tool was formed so that it executes the Matlab script, that calculates thelosses, for a number of different design options and stores the alternative which producesthe least losses.

This project investigated the current market regarding wireless net and the communication between the tools used for diagnostics/maintenance and an embedded system. Based on documentation obtained through interviews a demo system was created based on Bluetooth Low Energy (BLE) communication between an embedded system and an Android device.This report intends to describe the tools and methods used in the design of the demo system and the result of an analysis of the BLE communication.Bluetooth Low Energy is an exciting protocol with wide applicability within the industrial field. This project investigated the communicational possibilities between a Smartphone and a Raspberry Pi and based on the results that emerged the conclusion can be drawn that BLE is a protocol with many beneficial applications within industrial IT..

Two ecological models of nitrogen processes in treatment wetlands have been evaluated and compared. These models have been implemented, simulated, and visualized in the Modelica language. The differences and similarities between the Modelica modeling environment used in this thesis and other environments or tools for ecological modeling have been evaluated. The modeling tools evaluated are PowerSim, Simile, Stella, the MathModelica Model Editor, and WEST. The evaluation and the analysis have been performed using McCall?s factors for software quality (McCall et al, 1977), a correlation analysis and the Constant Comparative Method (Glaser&Strauss, 1999).

This report represents a comparison between two different tools used to create an online store that was developed by two students at the Technical University in Jönköping. The web shop will be of great benefit to both customers and administrator in a food firm known as Mattias' Livs. The company wanted an online store that facilitates the sale section and gives a full control of their stocks. The aim of this thesis is to create an online store that offers customers the ability to shop online and help the staff to operate the company in a simpler and more efficient way, which reduces the need for human resources and thus leads to less costs for the company. The aim also includes a comparison between the two different tools used to create the online store.