The thesis is an examination of the methods that are appropriate and long-term choice to obtain clamping force and secure screw joints in production. The employer, Scania CV AB, transmission manufactures axle gears to all trucks produced in Södertälje. One of the most common assembly elements is screw joints, where the clamping force is essential to achieve a secure joint. Current methods to secure the joint is due much of the friction effect and is an indirect method to measure the clamping force. The clampforce accuracy becomes more widely with torque angle control.

Humor is as interesting as it is hard to define. It has travelled a long way since Hippokratestheory about body fluids and how someone, if lacking one of these, were called a humorist andwere laughed at.In this thesis we developed a new method for categorizing types of humor in Swedish comedyseries on TV. We chose six different shows (Grotesco, KvarteretSkatan, Morgonsoffan, Fredaghelaveckan, Parlamentet and Hjälp!) from the two most popular TV-channels in Sweden(SVT1 & TV4).We based or method on previous researchers? work and came to find some categories that wererepresented in most of the previous work. Our own method came to contain seven categorieswhich we believe is enough to obtain all kinds of humor in Swedish comedy series on TV.In our study we saw that most of the humor fell under the category that we called unnormalityhumor,a category which contained incongruity which many researchers believe is afundamental part of humor.Our opinion is that the unnormality-category became too wide in our study and that we perhapsshould have divided it into two or possibly three categories to see a more distinctive result.Nonetheless, our result offers an interesting starting point for future comparative studiesfocusing on similar subjects..

This study's interest area loops around how it is possible to understand texts' leverage over human thinking and acting. Focus lies on understanding which forces that form people?s views around men and women's relationships and relations in the public room. From this perspective our interest is to explore how the phenomenon rape is expressed in texts and how we can understand how rape through these texts are to be shaped in individuals' thoughts awareness and. Finally, it is also relevant to create understanding for how rape as a discoursive practice can have effects on individuals and society.

This report is a Master?s Thesis performed by Andreas Adolfsson and David Jacobsson atChalmers University of Technology. The purpose of this master?s thesis is to evaluate anew method for load-shedding, the voltage controlled underfrequency load-sheddingdeveloped by ABB. This report presents a comparison between conventionalunderfrequency load-shedding and this new method for load-shedding.

This study investigates educators? experience of Intensive Behavioral Therapy (IBT) for preschool children diagnosed with autism. The aim is to examine, from the educators? perspective, how useful this method has been, what difference it made for the children with autism that took part in this training and also how the educators? have been able to organize and implement the method. The study is based on 6 semi-structured interviews and 29 surveys.

Retinoscopy, also known as skiascopy, is an objective method for assessing therefraction of the eye. This method has been used for a long time, both in animalsand human patients. According to the literature, it has been postulated that it is notnecessary to obtain cycloplegia before the examination in lower mammals. Someauthors even mention that it can make the examination more difficult. Therefore itis not recommended.

This report presents a method for modelling a computer system from a security perspective. The questions that are going to be treated are:? What defines a secure system and how does the company relate to these factors?? What are the threats today based on hardware/software, human factors and company routines/policies?? What measures should be taken for the organisation to reach a higher level of security for their systems?? How do we develop a method for classification of security and what components should it contain?? What changes are reasonable and necessary with the respect to the company?s resources?The report has been done through interviews and analysis of existing systems on Fla?kt Woods AB. From analysis of material, the aspects judged relevant to the subject and to the company?s needs, have been compiled to a document.

Modern semiconductor design methods makes it possible to design increasingly complex system-on-a-chips (SOCs). Testing such SOCs becomes highly expensive due to the rapidly increasing test data volumes with longer test times as a result. Several approaches exist to compress the test stimuli and where hardware is added for decompression. This master?s thesis presents a test data compression method based on a modified facsimile code.

The E-department at GETRAG All Wheel Drive in Köping have problems with the efficiency on parts of their production equipment. The equipment with the most significant efficiency problems are four automated multifunctional production cells that produces housing for rear drive units. The major part of the problem is the large amount of small stops that causes the low efficiency.The department already worked with logging of interruptions and efficiency calculations before this project started. However this work was not done to the extent considered necessary for a systematic follow-up of the interruptions.The aim of this paper is to point out a more effective and systematic way to work with logging of interruptions and the follow-up. In addition the equipment were studied with a method for efficiency calculation that ? if used properly- is a more powerful and a visually better method than the one used by the company today.As the initial current state analysis of the equipment was made a lack of documented knowledge about the equipment was discovered.

Companies that invest in e-learning have different expectations regarding the outcome of the investment. According to literature and articles it is common that companies see reduction of costs as the primary benefit with e-learning. Therefore we ask ourselves the question if companies have attained the expected benefit of the investment in e-learning and to what extent cost reduction have been a determining factor in the investments? The purpose of the thesis is to examine if companies that invest in e-learning have attained the expected benefits. We also want to examine what the reason for investing in e-learning is and if cost reduction is the primary reason for investing.

Hematology-instruments that analyze blood cells can at specific cases be followed by manual counting with a hemocytometer. The plastic hemocytometer which has a fixed coverslip and is assigned for disposable use, appears to reduce the problems arising from the use of the traditional glass hemocytometer, for instance coverslip-application difficulty and dust particles. Capillary whole blood sampling may be useful for patients at the emergency department and in addition, a smaller volume of blood is taken compared to venous blood sampling. This study will focus on the platelet- and leukocyte count (PLT and WBC) in venous and capillary blood, in order to compare the plastic- and glass hemocytometers with Sysmex XN-2000 (Sysmex Corporation, Kobe, Japan), and verify if capillary whole blood sampling can be used for the measurement of these hematological parameters. 30 subjects donated both capillary- and venous blood samples and these blood samples were analyzed with glass- and plastic hemocytometers with Sysmex XN-2000 as the reference method.

Energy costs are high nowadays and that is the reason why the energy consumption needs to become as small as possible in most of the companies. To accomplish the small energy usage one needs to map the energy flows, study them and monitor them. One method that can be used for this is energy balance calculation. The method gives an opportunity to separate different energy flows and see where each flow is heading. There is also another method which is more advanced than energy balance calculation.

The purpose of this study was to describe and analyze youth community service in the Kalmar municipality. Our focus was on juvenile offenders and predecessor of public authorities. The juvenile offenders in our study have completed youth community service. A qualitative study was undertaken which include seven interviews. Our empirical data were compared and analyzed with previous research data.

The main purpose of this Master?s thesis is to do a benchmarking study of the marketing activities at the public library of Valdemarsvik. The purpose is also to describe and get a deeper understanding of benchmarking as a method for improving library activity. Four major problem areas are addressed: How can one use benchmarking as a tool to achieve change? How can one learn with benchmarking? What similarities and differences are there between benchmarking and other similar methods for competence development? Is benchmarking better than other similar methods for competence development? The empirical approach was qualitative and the method chosen was action research.

An organization must manage its resource consumption and material flows in order to satisfy the demand of its products as efficiently as possible. Managing of the aforementioned requires a balance between the organizations resources (such as the capability of distribution and production) and the market demand. According to Gardner (1990), an estimation of future demand is a necessity for maintaining the balance. An instrument that is used frequently to estimate future demand is demand forecasting. The demand forecasting practice has been thoroughly studied and a plethora of academic contributions exist on the topic.