CSR, Corporate Social Responsibility, has become increasingly important in a globalised world where the responsibilities of companies and governments are somewhat blurry. The textile industry is an industry where long supply chains and raw material production in developing countries are factors adding to the complexity and difficulties of solving ethical issues. Cotton production faces many environmental, social and financial challenges in the value chain. Therefore this case study takes a closer look at five Nordic home textile companies, Ikea, Hemtex, S Group, Moko and Finlayson, and how these companies choose their cotton related CSR tools and communicate their work on this area. These companies are of various sizes and therefore the resources for CSR work are also different, as well as the perceived values for working with CSR.

Former studies have shown that a considerable part of industries? energy usage can stem from idle times in the production. This thesis, carried out at Siemens Industry sector, evaluates the potential for using the control system to automatically put machines into energy saving mode during idle times. The main part of the thesis consists of a case study performed on machine tools at a Scania production site in Södertälje. Through load measurements the potential for energy savings was determined.The results show that there is a great potential for energy savings during idle times at the site.

The purpose of warning labels used by governments is to decrease consumption. In Sweden, the mandatory warning labels are designed according to statutory guidelines, and not according to research on attention-grabbing graphic elements. This results in a belief that the attention toward the warning labels is poor. An extensive experiment underlies this study, which has the purpose of providing insights to the effects that warnings, warning design, and warning content has on attention, attitudes and behavior in print ads. The study shows that, even though the standard design and content has lost much of its potential to communicate the warning, it gains more attention compared to a warning label with new design and content.

Breakdowns of welded structures are usually a consequence of fatigue loading. Fatigue fractures are commonly initiated in the region close to the weld toe but can also initiate from the weld root and from discontinuities inside the weld. The purpose of this investigation was to examine the weld quality of welded joints produced at Volvo Wheel Loaders factory in Arvika. The goal of the investigation is to give a clearer insight regarding factors influencing the fatigue strength of the welded joints and thereby give a better foundation for fatigue strength calculations.The investigation is including examination of the weld geometry, weld discontinuities and the effects of shot peening. Mainly three different methods for collecting test data have been used: Plastic replicas cast on the weld profile, weld specimens from a rear frame belonging to a wheel loader of model L110E/120E and Almen testing of the shot peening.The results showed that it is not possible to control even transition between the weld material and the base material without after treatment.

Det har gjorts mycket forskning kring Positioneringssystem för inomhusbruk då många applikationer och tjänster ärberoende eller kan förbättras av det. Trots detta finns idag ingen standard för hur positionering inomhus ska fungera.För de flesta utomhusmiljöer kan en modern mobiltelefons position erhållas med ett par meters precision via GPS. I eninomhusmiljö sjunker signalen drastiskt och en precis position är svår att uppskatta. En väl etablerad teknik är Wi-Fioch kan med fördel användas då de flesta inomhusmiljöer idag redan har Wi-Fi accesspunkter installerade. Då enmottagare erhåller en signal från en accesspunkt kan distansen dem emellan uppskattas för att sedan uppskattapositionen med den matematiska tillämpningen trilateration.

By doing a study of Stapelbäddsparken from a gender perspective I have been investigating and analysing physical planning and landscape architectural design. My intention with this thesis is to reflect on what a gender perspective in physical planning means and what kind of consequences and effects it could have on physical planning and outdoor design. Gender is something that is created, moulded and transformed by social and cultural processes. And it also includes a dimension of power concerning the knowledge of the relationships between women and men where the standard in today?s society is still men?s interests. To implement gender in my analysis of the park I have been observing how the park is used and who is using it. I have also been investigating who?s needs and wishes that has been provided for in planning and design.

Calculations of net present value are based on a discount rate, which requires knowledge about the company?s cost of debt. A common way to do this is by observing the company?s credit rating, when no credit rating is given it?s possible to use a synthetic rating model based on quantitative data to estimate a credit rating. Thus, the aim of this study is to increase the understanding of which quantitative data, in terms of key figures, that can be used to explain the given credit ratings for companies from the Nordic countries.In developing the model, key figures found significant in previous studies are being tested for whether or not they are applicable for companies from the Nordic countries.

The thesis analyzes two different approaches towards responsive web design, Mobile-first and Desktop-first. Responsive web design is a concept for websites whose design is customised based on the screen size. The analysis is performed by collecting views on the methods and also analyzing the usage of mobile and desktop internet to create a prototype of a responsive website where both methods are beeing used.The main difference between the methods is the foundation, where one is designed for mobile and the other for desktop. The thesis indicates that Mobilef-irst gives a better result for the mobile, which unlike the computer has poor performance, smaller screen and poor internet connection, therefore an advantage for the device that needs more focus to maintain a fast response. Desktop-first does not take this opportunity, but focus instead on the computer where the performance is better, which leads to a unnoticeable difference in response time.

Today all buildings contain some form of home automation. It might be heating controlled by athermostat or motion detectors controlling outdoor lighting.This paper,The Intelligent House, deals with the planning of a house in Kiruna, in the north ofSweden and further immerses itself in home automation or intelligent control in single-familyhomes. The house has been entirely planned, from layout to structural design and plumbing.The purpose of the paper has been to investigate the possibilities in home automation in singlefamilyhomes and to choose a suitable home automation system for the house being planned.The system has been designed and the costs and energy savings have been calculated.The system chosen for the house is called KNX and is the largest system for home automation inSweden. It is used to control heating, ventilation, lighting and alarm systems in the house. Is hasbeen found that KNX is very expensive and that the amount of energy, possible to save in thehouse, using the system, is relatively small.

In today?s IT world where software is constructed in a rapid pace, testing has become a crucial area to master when testing has to be done at a greater speed. To still be able to handle the demands of high quality software, companies have to spend more resources on testing and introduce test automation. By automating test cases the testers can gain time which they can spend on doing more complex testing and thereby increase the quality of the software.In this thesis we have helped Extenda AB, who delivers systems to retail companies, to introduce test automation in one of their customer specific projects. This has been done using their own in-house ?capture/replay? tool ECP (Extenda Cashier Player).We have also derived a process that explains how Extenda can introduce test automation on other customer projects.

The aim of the project is to develop a tool for a management system at the advertising agency ofConfetti. The company has during a longer period of time felt a need of introducing a quality and environmentalsystem but have a lack in resources of knowledge, time and money. Their goal is to have aconcrete documentation which describes their quality policy and the function of the activity.The work has been performed by mapping and analyzing the processes of the company according tothe process model with focus on one pilot process. New routines have been developed and documentedin a management system.Confetti would like their management system to fulfil the ISO-standard so that they eventually inthe future can be certified. Therefore a literature study has been done according to management systemsand standards.

The aim of this essay has been to study six female seniors use and view of the library and its roles. The two Danish scientists Jochumsen and Rasmussen talk about the library in terms of a social center, cultural center, knowledge center and information center. Depending on what lifestyle the seniors belong to in the social room, they use the library differently. The social room consists of four lifestyles, north-west, north-east, south-west and south-east. The things that are important to consider in order to be able to place each senior within the different lifestyles are education level, economic standard, interests and so forth.

This study examines patterns of consumption during the 1780s in Öjaby and Virestad parishes. I have examined the clothes and jewelry in estate inventories using the concept of status. Then I have used Pierre Bourdieu's theories to understand fashion mechanisms.I have identified five different groups, each distinguished by their formal wear. Men have similar clothes but in Virestad they have more items and more silver. Four people were divergent, they choose other materials and models.

Syfte:Syftet med uppsatsen är att undersöka och kartlägga varför och på vilket sätt IAS 39 anses vara en komplicerad standard. Vi vill även undersöka bakomliggande orsaker till problematiken kring utformandet av generella principer för redovisning av finansiella instrument. Metod:Vi har använt oss av en kvalitativ forskningsmetod i kombination med en induktiv ansats. Strauss och Corbins resonemang om den grundade teorin har genomsyrat arbetet. Frågeställningar härledda utifrån den offentliga debatten har behandlats genom semi-strukturerade intervjuer.

Background: At the turn of the year 2004/2005, IAS 19 replaced Tryggandelagen (TrL) and RR 29 as the accounting standard in Swedish concerns. This introduction was associated with a certain apprehension for the possible changes in the companies? pension liabilities and equity.Purpose: To illustrate the difficulties of the introduction of IAS 19 by observing how it differs from TrL, and what kind of problems these differences can cause.Procedure: Individuals who are well up in, and work with pension liabilities have been interviewed. After this follows an example of the calculated pension liability of a company, to illustrate the differences between the calculations according to TrL and IAS 19. To conclude the chapter, a comparison between a number of companies from the Stockholm stock exchange is made to establish their various actuarial assumptions.Method: The essay mainly follows the qualitative research method, since this method is more appropriate when the substance in the matter is based on detailed differences and opinions.Results and conclusions: The introduction of IAS 19 has taken time and been an expensive matter, although the expenses weren?t as great as feared.