This thesis aims to examine the viability of various techniques for increased electricity generation in CHP plants and the effect of electricity price fluctuations on the profitability.The techniques examined are fuel dryer, pellet production, methane production, combined methane- and pellet production, seasonal heating storages in caverns and pit heat storages and condensing tail. Using Excel and Matlab, the prerequisites for investment costs, revenues and expenses were calculated.What affects the price of electricity is a combination of economic and technological development, energy prices, economic structure, population changes and weather. Different scenarios for the electricity price were therefore examined. In the base case, the electricity price was given by the Nord Pool electricity price statistics of area three in 2011. Thereafter, WiMo was used to design the electricity scenarios for 2030, which was then applied to the data to obtain the viability of various scenarios. The techniques examined were found to give greater profits to the CHP plant by increasing and optimizing the production of electricity.

In Sweden, the eutrophication of lakes, water courses and the coastal areas is considered the major threat to aquatic ecosystems and therefore actions taken to reduce the nutrient load to aquatic system including the Baltic Sea has high priority. There are many different sources of phosphorous and nitrogen and domestic wastewater is one contributing factor to the high load. Especially waste water from households that is not connected to municipal sewage treatment or a local small scale plant with appropriate nutrient removal efficiency is considered a problem. These types of households are quite common in rural areas in Sweden and in areas where summer houses has been converted to permanent living. Swedish legislation now permit the municipalities to decide in which areas within the municipality higher demands of the local small scale treatment facility should be met by the households (i.e.

Public concern about the release of toxic compounds from wood-based products drives legislation towards enforcing industries to find and use more sustainable solutions for wood treatment. Plant oils are good alternatives to treat wood, minimizing or even neutralizing the impact on the environment. Wood modification with epoxidised linseed oil (ELO) and acetic acid as catalyst has proven a suitable method to impregnate and protect wood. However, the mixture presents a serious inconvenience because of the quick polymerization of the ingredients that limits its practical application. Therefore, this study was designed to evaluate an alternative method using a two-step process which bypassed the problem above.

A common problem in forestry is plant death caused by frost. The risk of frost is highest on wind protected, flat or low-lying areas in the terrain. Here you often have regeneration problems with Norwegian spruce which is especially sensitive to spring frost. Swedish tree experiments have shown that the black spruce can be a suitable alternative on these areas, for example on moisture frost prone areas. The species originates from North America and its pioneer tree characteristics make it more frost hardy than Norwegian spruce.

Hemp is an old agricultural plant and has been used for hundreds of years for making textiles, ropes and other fibre products. In the middle of the last century the Swedish government prohibited all growing of hemp. Natural fibres were replaced by syntetic fibres instead. Today there is a newly awakened interest for using natural fibres from renewable materials. Growing of industrial hemp for fiber is allowed in Sweden again. I want in my Paper give Swedish growers an insight of which harvesting methods that have been tried in Sweden and how they worked.

This study was conducted at Glimek AB, a company that has chosen to decentralize its central storage unit in order to increase production efficiencies. The purpose of the study was to identify the problems in the production cycle that lead to the decision to decentralize the central storage unit, as well as identifying what the decentralization entails. The effects of the decentralization have not been analyzed in the study, and consequently neither financial nor production disadvantages have been considered.Appropriate questions were formulated based on the chosen underlying theories, and were asked to selected individuals with relevant knowledge. The study is based on the information that was gathered from interviews with management as well as staff within the company. In addition, supporting information such as flowcharts, drawings, orders and decision support documents were supplied by the company.

In Sweden, the demand for bio energy has increased in recent years due to the current energy and climate debate. In 2008, the energy supply of Sweden was 612 TWh, biofuels accounted for 123 TWh of these. Stumps have been highlighted as a potential fuel in recent years and the Swedish Forest Agency expects a technically and biologically feasible potential of 20.7 TWh annually between 2010 and 2019. The idea of utilize stumps is not new. During the 19th century stumps were used for tar production and during the 70?s and 80?s attempts were made to use stumps in the pulp industry.

This thesis describes the planning and development of a volume meter of pine and spruce cones. The product was designed and developed for Stigsjö Skog och Frö AB in Härnösand. It was developed taking into account a number of requirements set by the supervisor David Zetterlund. The main requirements were that the volume measurement would be fast and give accurate results. These are two requirements that are missing in today's volume measuring method which is very problematic for the company.The plant was visited several times in Härnösand, mainly to discuss the generated concepts with the supervisor and perform tests on the prototype.

Applicering av överlast på kalkcementförstärkta jordar är ofta förekommande idag, forskning indikerar dock på att överlasten här, inte ger samma effekt som på oförstärkta jordar. Med grund i uppmätta värden i fält, visas i denna rapport, sättningsdifferenser mellan att använda överlast jämfört med att endast applicera brukslast. Resultat av analyserna visar på sättningsbeteende observerat i fält. Om erforderlig liggtid för brukslast finns, uppstår endast små sättningsdifferenser mellan att använda överlast eller inte.Genom att utföra sensitivitetsanalys i FEM- programvaran PLAXIS studeras kryputvecklingen i den förstärkta jorden. Effekten av att applicera en överlast visas för krypsättningar över lång tid.Inget resultat från de numeriska FEM- analyserna visade att märkbart gynnsam effekt uppstår på grund av överlastens applicering, med avseende på krypsättningar.De numeriska analyserna utförs i 2 och 3 dimensioner för att belysa effekt av förenkling av ett lastfall som inte uppfyller krav för oförstärkta jordar i plant töjningstillstånd.Utöver detta ges efter en litteraturstudie, förslag på hur vissa indataparametrar kan utvärderas från empiriska relationer.

The short term effect of phosphorus in sewage sludge was investigated to establish howmuch of this a farmer can grant him- or herself, if using sewage sludge as a phosphorusfertilizer. Possible differences in plant availability between sludge phosphorus precipitatedby iron, aluminum or calcium integrations were studied in a sandy soil at two pH levels.The sludges were analyzed using pot and incubation trials. As the intention was to investigategrowth limitation due to phosphorus deficiency, a soil with low phosphorus supplywas chosen as well as a low phosphorus application rate. Sludge corresponding to 12kg phosphorus per hectare was applied. Treatments fertilized by sludge were compared totreatments where 0, 6 and 12 kg phosphorus per hectare from mineral fertilizer was applied.Every treatment was replicated six times.

Black nightshade (Solanum nigrum L.) is a major problem in gardenpea cultivations contracted by Findus AB, a Swedish food processing company. The main problem is that the nightshade berries contain solanin and, thus, are not tolerated in the marketed product, which is fresh frozen peas. In addition, berries have the same size and color as the peas and cannot be separated at the factory. Black nightshades have the last ten years become a more common weed in field grown vegetables in the southern parts of Sweden. This MSc thesis presents an experiment conducted in 2005, aiming at developing a tool for predicting the need for control of black nightshade in peas.

This thesis is about Christmas tree plantations in Sweden, and if its profitable to produce Christmas trees in Sweden. Sweden has 4,3 million households, 3 million of these households buys Christmas trees. 80 % of these Christmas trees are Norway Spruce (Picea abies), which is the most common Spruce in Sweden. Every year over 170 000 Christmas trees are imported to Sweden. The main import comes from Denmark.

Pharmaceuticals that are found in marine ecosystems are a threatening environmental concern, which is known to harm both animal and plant life. One of the reasons for this problem is that the waste water treatment techniques are not optimized to clear waste water from its pharmaceuticals contain. In this master thesis four Swedish treatment wetlands were studied, and their ability to reduce numerous pharmaceuticals in waste water. The four treatment wetlands that were studied were those in Oxelösund, Trosa, Nynäshamn and Eskilstuna. Two ecotoxicological tests and chemical analysis were used.

In times of increased flooding, enhanced by climate change, polluted stormwater poses an increased threat to the environment through contaminated water entering waterways. Bioretention utilizes natural processes in soil and vegetation to treat pollutants and combat this threat. Biochar produced through pyrolysis, has a high cation exchange capacity (CEC) and could therefore increase treatment in bioretention systems. This research applies a literature review, interview, and a model to explore the benefits and disadvantages of biochar in order to specify a soil-mix through an understanding of the production process and preferred application rate. High purification through CEC, increased water holding capacity, and carbon sequestration being the benefits discussed.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.