The project was based on a request to improve an already existing program and hardware at the electrical engineering department at the royal institute of technology. For maximum ease of use, tests have been done on students to properly design the program for what it is meant to be used for. These tests have been transcribed and analysed, then brought back to the group in a discussion and then transcribed and analysed again, I call this process the ?four step process? (this process is presented and explained in chapter 6.4.). A part of this master thesis was also to analyse the four step process to enhance validity of this research.The project resulted in a new program with a new graphical view and features to help students and researchers to work with the technical tool for electromagnetic readings of planar objects.

The competitive nature of the automotive industry has always implied a necessity to improve product development concerning time-to-market, cost and product quality. As capacity of computer-aided engineering (CAE) tools has evolved, so has the strive for simulation-driven design. Virtual durability testing using full vehicle models is one of many challenges posed in front of vehicle manufacturers when computer simulations are given a key role in product development.This thesis has been initiated as a preliminary step towards implementing dynamic virtual durability testing in the development of buses and coaches at Scania. The objective has been to assess the predictability of a full vehicle coach model and to what level of precision structural loads can be predicted. Previously performed proving ground testing of a Scania Touring coach has been the basis for the modelling and simulations in this thesis.A virtual model of the Scania Touring coach has been created in multi-body simulation software package MSC.Adams.

På Skånemejeriers ysteri i Kristianstad har en energiinventering utförts. Detta för att lokalisera de komponenter på mejeriet som är energianvändare och få en bättre insyn i energianvändningen på mejeriet. Föreliggande inventering har sedan använts för att analysera energianvändningen och föreslå energieffektiviseringsåtgärder. Informationen i uppsatsen är införskaffad genom löpande intervjuer med personalen på Skånemejerier och deras samarbetspartners, okulärbesiktningar samt genom ett studiebesök på Arla Foods i Kalmar.Inventeringen är indelad i två områden, nämligen produktions- och stödprocesserna. Produktionsprocesserna innefattar samtliga energianvändare som direkt berör produktionen av ost medan stödprocesserna innefattar de energianvändare som berör produktionen av ost indirekt..

Examensarbetet Framtidens skolbänk som har utförts på avdelningen för maskinteknik vid Blekinge Tekniska högskola i samarbete med grundskolan Vittra Adolfsberg. Skolbänken är till för att möjliggöra ergonomiskt bra arbetsställningar i både sittande och stående position för alla elever oavsett längd och storlek. Dessutom ska skolbänken underlätta användandet av digitala undervisningsredskap såsom datorer och surfplattor. Examensarbetet består i att utveckla och konstruera en skolbänk som möjliggör detta utan att skolbänken blir för dyr eller för ömtålig för att kunna vara att reellt alternativ för alla skolor. Idag så är projektet på konceptstadiet men det finns definitivt möjligheter att någon variant på mitt förslag skulle kunna kommersialiseras då det i dagsläget inte finns några liknande produkter på marknaden..

This study examines the equity cost of capital between two periods distinguished by substantial differences in IPO activity. In light of the stemmed IPO flow to the Swedish stock exchange in 2012, this study regards the conjecture that the IPO count is related to the prevailing cost of equity capital for certain periods. By application of the Residual Income Valuation model the cost of equity capital is abstracted from sampled stock prices and compared at two points in time for which extreme highs and lows of IPO activity were observed. Using randomized samples from 1999 and 2012, significant differences between the estimated costs of capital are established. The findings indicate that the equity cost of capital, much as it may help influence, nevertheless plays a subordinated role in the going-public decision..

This bachelor thesis portray a project where the main task were to develop a computer based system prototype for handling of absence report at the upper secondary school af Chapman in Karlskrona. The project has been conducted in cooperation with students from the university programs software engineering and information economy at Blekinge Institute of Technology. Our task as MDA-students have been to survey the process of absence report of today through field studies and give a proposal of a graphical user interface which later were developed by the software engineers. The thesis also handles the cooperation with other students from other university programs..

This master?s thesis describes the development of a model of the catalystsystem aiming at control by an MPC. A well functioning model, which is suitable in control purpose, is important while emission legislation become more and more hard to fulfill for the car manufacturers. Much research has been done in the field of physical modeling of the system, but in this work a linear adaptive time discrete ARX-model is developed and validated.The systems tendency to change its dynamic during usage implies that the model must be adaptive. The developed model proved to be well functioning and shows promising conditions for the MPC design.

Today a lot of goods is transported on wood pallets because it?s practical and enabels a fast way to load cargo. The drawbacks with pallets are that they weight a lot, are big and are relatively expensive. Therefore IKEA has developed plastic lists that can replace the europallet in some applications. In this examwork an automatic handling equipment for plastic lists are design from a requirement specification to a finished machine.

This study examines the equity cost of capital between two periods distinguished by substantial differences in IPO activity. In light of the stemmed IPO flow to the Swedish stock exchange in 2012, this study regards the conjecture that the IPO count is related to the prevailing cost of equity capital for certain periods. By application of the Residual Income Valuation model the cost of equity capital is abstracted from sampled stock prices and compared at two points in time for which extreme highs and lows of IPO activity were observed. Using randomized samples from 1999 and 2012, significant differences between the estimated costs of capital are established. The findings indicate that the equity cost of capital, much as it may help influence, nevertheless plays a subordinated role in the going-public decision..

Detta examensarbete ger en introduktion till området systemutveckling. Kravhantering har i alla tider varit en viktig del i systemutveckling. För att kunna lyckas med kravhanteringen under ett systemutvecklingsprojekt är det viktigt att använda sig av rätt teknik. En teknik som finns för att kunna hantera de krav som ställs på ett system är Use Case som härstammar från UML. Syftet med detta examensarbete var att ta reda på de för och nackdelar som har upplevts av användare som har arbetat med Use Case i samband med kravhantering.

Detta examensarbete är utfört på uppdrag från AVL Södertälje Powertrain Engineering AB.Målet med arbetet har varit att utveckla ett styrsystem för ett elektroniskt styrt pneumatiskhydraulisktventilsystem på en encylindrig förbränningsmotor i en testcell. AVL är enoberoende firma som utvecklar drivlinor med förbränningsmotorer samt instrumenterings- ochtestsystem. Ventilsystemet, med ett fungerande styrsystem, ska användas i AVLs utvecklingsochforskningsarbete på förbränningsmotorer.Ventilsystemet,Free Valve Technology, är utvecklat av Cargine Engineering AB och består avelektroniskt styrda pneumatisk-hydrauliska aktivatorer som opererar en motorventil individuellt.Aktivatorernas styrsystem har utvecklats helt iSimulink och implementerats som en integreraddel i det av AVL utvecklade motorstyrsystemet Raptor. Hårdvaran och plattformen är ett rapidprototyping system från dSPACE GmbH. Systemet har visat sig fungera tillfredsställande i entestcellmiljö vid lyfthöjder större än 3 mm och varvtal lägre än 2500 rpm, även underförbränning.

Ibland kan det förkomma problem mellan utvecklare och kund/användare då de tar fram kraven till ett nytt system. En anledning till detta kan vara att utvecklingsgruppen och användargruppen inte har samma kunskaper och erfarenheter och talar då inte "samma språk". En lösning till detta problem kan vara att ta hjälp av en mockup. En mockup är en fysisk och/eller interaktiv modell av ett gränssnitt. I detta arbete har vi, med hjälp av intervjuer och observationer, undersökt om detta hjälpmedel underlättar kommunikationen i verkligheten..

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

The pdf is excluding images, because of uncertainties regarding copyrights. Instead I have put links for each picture so you may find them on the Internet. For a list of links to the online sourcematerial, please visit http://del.icio.us/Cyborguppsats.

This Master of Science thesis was completed at the Department of Machine Design at the Royal Instituteof Technology in Stockholm in collaboration with Lund Faculty of Engineering, Luleå University ofTechnology and Stanford University. At Stanford University a global product development project wasrealized as part of the course ME310. The project was initiated by the American company ImmerseGlobal whose vision was to develop a new type of Atmospheric Water Generators, a machine that absorbsthe moisture in the air and via a water system transforms it to pure drinking water. The project was partlyfinanced by the Product Innovation Engineering program, a Swedish research and development programfor increased innovation capability in organizations.In parallel with the global project in the ME310 course the product development process was studied inorder to compare it with a product development course at the Royal Institute of Technology, IPU. Thetwo courses are similar to each other in several aspects.