In connection with Henriksdals wastewater treatment plant (WWTP) a smaller plant is situated called Sjöstadsverket where new methods for wastewater treatment are tested and evaluated in different process lines. On one of the lines experiments with enhanced biological phosphorous removal (EBPR), have been carried out to evaluate if it is a good alternative to traditional chemical phosphorus removal. This thesis evaluates the results from the experiments conducted during fall 2005.The incoming water from Hammarby Sjöstad consists of only household wastewater, which gives a wastewater with high concentrations of nutrients and organic carbon. This is partly positive, because one of the limiting factors for effective biological phosphorus removal is the lack of easily biodegradable organic carbon. The high concentrations of ammonium and phosphorus demand a high reduction to achieve the requirements of outgoing concentration.To optimize the process experiments with different recirculations and different aeration techniques have been made.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

The purpose of this thesis is to analyze the regulatory power, efficiency and impact of export control on Swedish arms export from the 1980s onwards, linked to the delegation of authority of permit license to the Inspectorate of Strategic Products in 1997. An increase in the administrative sector, based on a collective decision making process and established criteria and guidelines, aimed to strengthen the control of arms export to non-democratic and problematic states. In short, the aim of the study is to investigate and analyze whether there was a decrease in the arms export to problematic states or not. On one hand, it is reasonable to assume that the introduction of the new regulation entailed a more strict arms export policy. However, previous research has showed that regulations are sometimes not effective since incentives to breach these may be present.The study begins by examining the Swedish case and situation in terms of arms manufacturing and export, as well as the delegation of authority and legislation applied to the field over time.

Skärgårdsstiftelsen, which is responsible for several of the archipelago islands in Stockholm, has chosen to explore the possibilities for more sustainable heating systems in buildings on the islands in collaboration with KTH. A reduction of energy use and improving the efficiency of existing heating systems are included as part of the environmental work. This report studies the island of Grinda, which is located outside the area of Vaxholm in Stockholm. The study area consists of a guesthouse consisting of a restaurant as well as conference facilities and four neighboring cottages used for overnighting. The cottages now run solely on direct electricity, both for heating and hot water.

Climate and environmental issues is now high on the agenda. We live in a generation that must try to solve some major environmental problems. Buildings and habitations account for approximately 40 % of Sweden's total energy today. To reduce this figure, as needed, more research in the field of energy efficiency is required.This thesis concerns the heating of buildings. The load on district heating is heavy during certain times of the day.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

Beef production in Sweden has traditionally been about rearing of dairy calves to slaughter. With reduced number of dairy cows and accordingly less dairy calves for slaughter, there has been a need for new forms of beef production in Sweden. In Västerbotten there are good conditions for beef production with a high feeding level of roughage due to favourable climate. The aim of this thesis is to, through interviews with ten farmers with beef production in Västerbotten, study what and with how much they feed their animals and link the results to production level. The thesis begins with a literature review where the general feeding standards and feeding recommendations for beef cows and growing cattle are examined.

The aim of this thesis is to explore the institutional design of Participatory Budgeting (PB) in Sweden and how the design may contribute to realize central democratic goods. The study records the different PB experiences in Sweden and focuses on one particular case, which is the only case that successfully qualifies as a genuine PB-process according to international standards and definitions. To examine this, the following questions are asked: which municipalities in Sweden have implemented Participatory Budgeting? How can the institutional design of Participatory Budgeting be described and to what extent does it enable the realization of central democratic goods? To what extent does the institutional design enable the realization of the democratic goods inclusion, popular control, considered judgment and transparency? To what extent does the institutional design enable the realization of the institutional goods of efficiency and transferability?The study is based on an institutional theory of democracy. The method used is a mixed method ideal type analysis that combines document analysis, surveys and interviews.

Husaberg Scandinavia AB is a company producing and developing a range of motorcycles for both on- and off-road use. Husaberg provided the project group with a task of developing an entirely new way of operating the sequential transmission that can be found in today?s motorcycles. The target was to bring the product from idea to a functional prototype ready for further tests. Operation of the motorcycles transmission is today made by a foot pedal placed on the left hand side of the bike.

Most of the clothes sold in Europe today are produced in developing countries where the production costs are lower. The exploitation of the developing countries has led to that the inferior working conditions in these countries have attracted attention from media and NGOs. Globalisation makes company activities more transparent and the absence of transnational laws calls for alternative regulations. Many companies in Europe has since mid 1990s developed codes of conduct to satisfy the demands of external and internal stakeholders. EU also brought Corporate Social Responsibility to it?s agenda in the beginning of the 2000s and subsequently signals of approaching laws were given.

In the production of pulp, paper and cardboard, a large amount of water is used daily. The water has to be purified in the internal purifying plant before it reaches the receiving body of water. In the biological purifying stage at the Stora Enso Skoghall mill, an aerated basin is used where the microorganisms, using oxygen, oxidize the organic material to carbon dioxide. The air is pumped from the bottom of the basin and the oxygen can then be transported from the air bubbles to the water through diffusion. The problem with aeration of waste water from the forest industry is that wood residues, such as fatty acids, are making the transport of oxygen in water more difficult.

As a consequence of increasing wind power installations in the Nordic grid the last years, the need for regulating power has become larger. In the Nordic grid, regulating power is mainly provided by hydro power. One part of the regulating power is called frequency control, which ensures that the grid frequency is stable and close to 50 Hz.However, setting the turbine into frequency controlled operation may cause stress and wear of the components in the mechanical control system. Frequency controlling implies large and frequent servo forces and longer travelling distance of the sliding bearings in the Kaplan turbine.Based on one selected Kaplan turbine, Selsfors G1, measurements and MATLAB calculations have been performed in order to determine forces and movements of the linkage system. With these forces and movements as input, stresses and fatigue have been determined as well as sliding distances, bearing pressures and wear of bearings during a typical lifetime of 40 years.The results indicate that no severe wear exists on the bearings during 40 years of service.

The prevailing food and energy crisis of the world, due to the declining reserves of fossil energy and a never ending rise of consumption, forces us to look into new fields to supply our energy demand. The boom of bio energy is criticized, as food crops are used to provide biodiesel and ethanol and the volumes are ridiculously small to supply world demand. Algae are one of the world?s oldest life forms and exist in many different phyla, providing a great variety to choose from, for different purposes. Cultivating microalgae offer a way to produce energy at great volumes without competing with food production and at the same time the algae offer a way to use our expensive nutrients in a more efficient way, besides this the algae are carbon dioxide neutral since their carbon source can be supplied by the atmosphere and the additional energy required can be supplied by algal oil or other renewable sources.

The government regulations for energy use in buildings will be tightened in the future. At the same time the interest in environmental classifications and certifications of buildings is increasing. This has meant a new situation for solar energy. The designs of solar heating systems are often based on experience and/or rules of thumb, rather than calculations and simulations. This thesis examines whether simulation tools, in this case Polysun, are useful in this work.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.