Detta arbete har bedrivits som ett produktutvecklingsprojekt där ett koncept på en testrigg för kolvpartiet i Hägglunds Drives hydraulmotor Compact CA har tagits fram. Kolvpartiet är en viktig del av hydraulmotorn vars prestanda påverkar hela motorns prestanda. Ett kolvparti består av en kolv och en kamrulle och i en motor finns det ett flertal kolvpartier, vilket gör det svårt att utföra mätningar på kolvpartiet på plats i motorn. Kolven trycker kamrullen mot en kamring som i sin tur gör så att kolven trycks mot väggen av den cylinder som kolven är placerad i. Detta leder till att ett vridmoment skapas mellan kamring och det cylinderblock som cylindrarna är placerade i.

The conditions for a good silage process start with good wheather and choice of crop, then choice of harvesting machinery. The shorter and more mechanically treated crop, the better quality of the forage. (Pauly 1994). This study has examined the variations in chopping length depending on harvest method. Precision choppers works with a rotating chopping cylinder, where the crop is cut into pieces.

The actual project presents the development of a testing rig for a steam engine. A short overviewabout the development of steam engines is presented, until arriving to the development of thepresent engine, which will require to be tested in different ways.The testing rig studied on this project (based on a Lanchester engine) will be used to testdifferent materials and layouts for the group Piston-Cylinder.The engine is a high performance steam power engine, which is going to have a highpower/dimensions ratio, what will lead to require high performance components and materials.An introduction to the testing rig is presented, and the entire design project is done in order toreplace the disappeared documentation of the current testing rig, built on the 1970?s. Also somemodifications done in the original testing rig are presented, as well as some detected problemsand their possible solutions..

This project is about investigation and improvement of a V-plow for the company Swekip. A V- plow is used for snow removal but this product has been found to have deficiencies in its construction, breaking down and not living up to the desired objectives. This is because the product is ordered from a company in China where they have some problems with understanding the purpose of the plow.Initially the existing plow is investigated, all the shortcomings set out and examined, what is wrong and what needs improvement?When the solutions were done they were evaluated and examined that they actually live up to the desired requirements.This assignment is a pure construction project where the majority is implemented in CAD, where models are developed and FE analyses are carried out. But the project also includes a feasibility study, idea study and hydraulic design.The results are presented in the form of a CAD model and associated drawings that will serve as the manufacturing basis for the new V-plow.

We got in contact with Marco AB, who we?ve had contact with before concerning earlier projects, to find out if they were interested in arranging a larger project for our last class (Examensarbete 15hp). They were very positive to this proposition, and soon they offered us a project regarding reconstruction of their current mechanical device that absorbs all the force from the lift itself when it is at a predefined level (sv. sjunkspärr). The current solution does fulfill the requirements that are given, however it is not a solution that gives a high level of satisfactory.

Kiruna Wagon konstruerar och tillverkar järnvägsvagnar för transporter inom gruvindustrin. En av deras produkter är Taimn091 en vagn för transport av kopparslig. Vagnarna rullar idag mellan Bolidens koppargruva i Aitik och smältverket i Skellefteå. Eftersom vagnen transporterar koppar har den ett tak monterat för att förhindra kopparsliget från att läcka ut i naturen. Taket öppnas idag med hydrauliska cylindrar via ett hydrauliskt aggregat som kopplas in till vagnarna vid laststationen.

To get an optimal print result with rotogravure on improved newsprint, MF-paper, knowledge aboutwhat adjustment that should be done through the whole production is needed. This degree project investigatesthe reproduction?s effect on the final print result.A test print is done at Quebecor World Nordic Interprint´s regular print unit. The evaluation of theprint shows how important the use of a unit adjusted ICC-profile is for the print quality. A comparisonbetween the two separation methods GCR and UCR shows that Interprint´s present ICC-profile, usingUCR as separation method, gives less missing dots.

We got in contact with Marco AB, who we?ve had contact with before concerning earlier projects, to find out if they were interested in arranging a larger project for our last class (Examensarbete 15hp). They were very positive to this proposition, and soon they offered us a project regarding reconstruction of their current mechanical device that absorbs all the force from the lift itself when it is at a predefined level (sv. sjunkspärr). The current solution does fulfill the requirements that are given, however it is not a solution that gives a high level of satisfactory.

We got in contact with Marco AB, who we?ve had contact with before concerning earlier projects, to find out if they were interested in arranging a larger project for our last class (Examensarbete 15hp). They were very positive to this proposition, and soon they offered us a project regarding reconstruction of their current mechanical device that absorbs all the force from the lift itself when it is at a predefined level (sv. sjunkspärr). The current solution does fulfill the requirements that are given, however it is not a solution that gives a high level of satisfactory.

We got in contact with Marco AB, who we?ve had contact with before concerning earlier projects, to find out if they were interested in arranging a larger project for our last class (Examensarbete 15hp). They were very positive to this proposition, and soon they offered us a project regarding reconstruction of their current mechanical device that absorbs all the force from the lift itself when it is at a predefined level (sv. sjunkspärr). The current solution does fulfill the requirements that are given, however it is not a solution that gives a high level of satisfactory.

Simplicity, intimacy, freedom and one single threadcharacterize the knitting technique.In my project, I have studied ways of creating three-dimensional shape and structure using single threads and various knitting techniques. I applied my ideas in a collaboration with the singer Sofia Karlsson. The focus has been to design a portable object that can be used in pictures for the cover and promotion of her upcoming album.The material I studied, processed and used in creating the three-part object was linen. In the center stands a collar, that changes expression depending on how it is worn and which side is turned towards the outside. The collar interacts with a cylinder for her hands and a hairnet.

This essay is about North Korea, Kim Jong Il and how the future looks for the states political system. The purpose is to explain how Kim Jong Il and the North Korean regim rules the state and with help of Machiavellis theory about the Prince, tell about the states future. The essayinvestigates how well Kim Jong Il and the North Korean regime are keeping their power overthe state and if their possibilities to continue in the same way are good or bad. The essayinvestigates North Koreas possibilities for further reign through Niccolo Machiavellis theory.The argument is that the North Korean state and Kim Jong Il have few or noneconditions to continue with the same political system that the state in this time have.The result shows that, through a Machiavellian perspective, Kim Jong Il and the North Korean regime have bad conditions to continue ruling the state in same way as now. The investigation, unfortunately, do not show when and how North Korea will be exposed to a government switch , but the result points to a change..

The basis of the study lies with a newly patented gearbox by cardiologist and inventor Stig Lundbäck. Stig founded CorPower Ocean AB to further develop the gearbox to be used in a wave energy device. The purpose of this project is to develop a concept of a lifting system with CorPower Oceans gearbox that is more energy efficient than a hydraulic lifting system. The goal is to use technology from CorPower Oceans gearbox inversely to perform heavy lifting as an alternative to hydraulics. The project is limited to applying the gearbox and gear rack on a forklift with a lifting capacity of ten tons.The main tool in this project will be the product development process Systems Engineering where only the most relevant parts will be used to develop a concept.

Sewer trenches usually contain material with a higher hydraulic conductivity then the adjacent soil. Thus they can serve as paths of preferential flow in a polluted area. Wastewater from factories can also leak from wastewater pipes and pollute the soil in the sewer trenches.The purpose of this project was to investigate pollutions in sewer trenches and in sewer pipes in the industrial area of Köpmanholmen, 20 km south of Örnsköldsvik in the north of Sweden. To make an estimation concerning the potential of transport of pollutions in sewer trenches, hydrological calculations were performed.Leakage to any greater extent did not seem to be a problem in the area. This is the case both for the concrete and the wooden pipes that have served as factory wastewater pipes.

When models are used to describe physical phenomenon during development or modification of a technical system, it is often possible to reduce both the time needed and the overall development cost. With the use of models it is also possible to investigate the potential of the selected solution, without the need for any expensive details and testrigs. In many cases it is also not possible to test all the aspects regarding the functionality that are desired from the system, without using the complete and final product.In this case a model based approach has been used to optimize the different parameters in the new snubbing mechanism for the Nose Landing Gear Retract Actuator on the JAS39 Gripen.During the simulations, upper and lower boundaries were calculated for the length of the spring and the diameter for the restrictor. The governing constraints were given by the requirements for the retraction time during cold conditions and that the amplitude of the alternating loads in the uplock mechanism were brought to an acceptable level.The most promising results from the simulations were then used in a limited number of trials in the hydraulic rig to verify that the configurations comply with the requirements.The final parameters for the snubbing mechanism were chosen to 35±1mm for the spring and 0.4-0.5 mm diameter for the restrictor..