The main project Dry preservation of source-separated organic household wastes involves a new technique for treatment of biowaste through drying. Investigations are going on to determine how the dried biowaste best can be used to close the natural circular flow of nutrients. The objective of this degree project is to determine if the dried biowaste can be used as a soil conditioner. By restoring the nutrients in the material to the ground, the natural circular flow is closed. A declaration of contents, including the nutrient levels, C/N ratio, pH and the electrical conductivity of the dried biowaste, was constructed and a germination test was done to make sure that the material did not inhibit sprouting.

Our Bachelor´s Thesis has been performed in co-operation with Bors Automation & Tool AB.Our task was to develop a servomotor powered tube cutting-machine with initial point fromtoday's hydraulic driven tube cutting machine Bors HYD 23. The purpose with the newconstruction was to achieve a more power-efficient tube cutting machine which could lowerthe power consumption, and also meet the market continued growing demand forenvironmental-conscious production.Bors Automation & Tool gave us relatively free hands in order to enable new thinking ideaswithout following their traditional constructional solutions.Our solution resulted in a construction based on a power source existing of a servomotordrivenrollerscrew, witch provides a more rational use of energy compared with the currentmethod.Bors Automation & Tool AB has decided to fabricate a prototype of Bors E 23 during theautumn of 2007, which they are planning to revile at the Tube 2008 exhibition in Düsseldorf,Germany.NOTE:Due to an agreement signed by the authors in the beginning of this project, no appendix is published at this time.If you want to wiew these documents, please contact the authors..

This report deals with the performance of a batch flow treatment of landfillleachate compared with a continuous flow system. The parameters in focus were total Kjeldahl nitrogen (TKN), BOD5 and COD. The pilot-scale experiment used eight barrels with a volume of 150 liters. Each barrel was constructed differently concerning its flow, its bed material grain size and its presence of plants or not. Four of the barrels worked in batch mode, thus four in continuous flow mode.

Coastal areas are popular for housing, both for permanent living and holiday houses. At the same time, thin sediments and small storage capacity in the bedrock makes the ground water resources limited. The limited ground water resources combined with too large withdrawals of ground water makes salt water intrusion a problem in many coastal areas. This study examine the risk of salt water intrusion in drinking water supplying wells on the island Södra Finnö in S:t Anna archipelago, Östergötland, Sweden. A calculation of the relation between ground water recharge and withdrawal is obtained to analyze the ground water balance in the area.

AbstractStormwater is defined as rain- and melted water. Ludvika kommun had little knowledgde about the stormwater that reaches a specific recipient Lyviken. Therefore they intended to do an research of the stormwater that leads down to Lyviken. The aim with this study was to assess the quality of the contents in the stormwater based on pH, conductivity, phosphorous, nitrogen, bacterias, oil and one sample that meassured the value of several methals. Since the population has increased for decades, the area of hard surfaces and asphalts areas also has increased. This can increase the pollutions that finally ends up in the recipient.

Amongst the published literature researching wet cleaning of paper there is a limited amount of studies conducted researching the method simmering water treatment. There are even less studies conducted on how simmering water affects the paper being treated when used as a cleaning method. Despite the limited research, there are literary reviews describing the method and suggesting it as an alternative for conservation of paper with iron-gall ink. The following study will therefore be examining, the somewhat unusual method, simmering water treatment, and comparing it to one of the more common wet cleaning methods: immersion washing. This is done to compare how the different temperatures of the water affect the paper. The types of paper used in this study consists of three dyed and four undyed papers. All of the papers are new, apart from one sample originating from 1847.

Present master of science thesis has been carried out at the Swedish Road Administration consulting services (Vägverket Konsult) in Karlstad. The purpose of the study is to investigate how well the calculated drawdown of the groundwater table predicts the actual drawdown when the road and railway gates at the studied sites are built. For this purpose the groundwater levels at the three bridges were measured during 6 months. The bridges in question are two railway bridges situated in Ölme and Ulvåker and one road bridge crossing a pedestrian and cycling path in Lidköping.In Ölme the calculated area of influence was smaller than the measured one. It differed up to 30 meters, i.e.

Mathematical models possible to simulate are of great importance in order to make successful projects in the aircraft manufacturing industry. An aircraft fuel system is very complex, containing pipes, tanks, orifices, valves and pumps. The principal of this thesis is using the tool Easy5, which no longer is considered reliable enough in terms of development and support. This thesis tries to evaluate the Modelica language as a possible alternative to Easy5. To make this evaluation, the components concerned in the fuel library in Easy5 are implemented to the Modelica language.

This bachelor degree project was carried out at Saab AB Service and Repair, Arboga, Sweden. The objective was to design, construct and implement a new stable and reliable method of measuring the continuous vertical displacement (height) of the military search radar PS861 mounted on a hydraulic powered elevator. The end product needs to be durable enough to be fully operational in the harsh environment of an outdoor elevator shaft and yet as accurate and precise as possible since one of its purposes is to calibrate control equipment. Previously used technique has proven not to meet any of the above mentioned properties.A prototype using a high resolution quadrature output rotary encoder has been developed, allowing a completely digital interface. This new method has been evaluated in laboratory environment where tests have been conducted regarding both reliability and validity.

At Forsmarks Kraftgrupp AB (FKA) forces on pipe systems due to transient flow are frequently calculated as a step to verify their structural integrity. In nuclear industries these forces are often calculated with a one dimensional thermal-hydraulic analysis-code called RELAP5. When calculations regarding more complex geometries are needed, the three dimensional code Fluent is often used. This code is highly time consuming and requires large computational power.This projects aim is to compare calculations of pressure, flow and forces carried out by RELAP5 and Fluent for an arbitrary pipe section during transient flow conditions. This has been accomplished by constructing a simple geometry for which a transient flow is simulated in both programs.

This project operate an environmental assessment of total waste was conducted by using a life cycle assessment (LCA), that examines the environmental benefits of recycling production waste from Atlas Copco at Stena recycling. Atlas Copco is a company engaged in the development and production of rig-mounted hydraulic breakers and handheld air breakers and handheld motorized rotisserie. Stena recycling is a recycling company engaged in recycling, processing and refining of metals, paper, electronics waste and hazardous waste.The purpose of this study is to focus on Stena customer Atlas Copco and evaluate environmental benefits between to recycle and not to do it. The result shows that the total energy gain, resulting from the recycling of waste fractions, lands at 6 990 089 MJ, corresponding to drive 3 times around the Equator with a truck (40 t). The result shows that recycling 3040 kg paper provides an energy gain of (38 600 MJ) compared with burning paper (19 500 MJ) is 19 100 MJ, which corresponds to heat a house for 11 weeks.

Rock groundwater has always caused major problems when tunnelling. Water leaking into tunnels can cause large problems, not only on the construction itself but also on the environment. A continuous water leakage can lead to a declining water supply, and geotechnical problems can occur as subsidence in the ground. Therefore it is of great importance to predict the consequences that can appear in the surroundings due to a declining groundwater surface.The aim of the study was to investigate different methods for predicting leakage and changes in groundwater level due to tunnelling excavations in rock. This thesis was performed by comparing mathematical methods, actual groundwater changes and results from preliminary investigations.Investigations were made for three railway tunnels planned by Botniabanan AB.

The report examines the factors which may be a contributing cause to the problems that are present when ferritic stainless steel are eddy current tested in a warm condition. The work is carried out at Fagersta Stainless AB in Fagersta which manufactures stainless steel wire. In the rolling mill there is an eddy current equipment for detection of surface defects on the wire. The ferritic stainless steels cause a noise when testing and this noise complicates the detection of defects.Because of this, a study was made of how the noise related to factors such as steel grade, temperature, size and velocity. By observing the signal and with the possibilities to change the equipment settings the capability to let a signal filter reduce the noise level were evaluated.

This thesis examines a possible control strategy to minimize flow fluctuations in Uppsala?s district heating system. High variations in flow rate may lead to complications caused by hydraulic constraints in the district heating system. These complications, such as inadequate pressure and temperature levels, increase the risk of heat delivery failures. It is therefore important to avoid such situations both for the producer and for the customers.Typically, the forward temperature is controlled by using a rough correlation with respect to the outdoor temperature.

Haldex Barnes Hydraulics (HBH) is a company which produces hydraulic aggregates for use in forklifts, construction equipment, and trucks. The last two years the company has expanded. This has lead to an insufficient production of aggregates. Thus wishes HBH to increase their production without making to large investments.This report includes a now-state analysis of the problems and where they are. From this a further analysis of possible improvements are made.HBH works mainly with assembling and this is made manually.