This thesis presents a comparative study of image registration at two picture collection libraries. The two registration systems are analyzed as to the theoretical principles behind them and their practical application, and related to theoretical tools for subject analysis and bibliographic standards. While a growing number of picture collections now digitize their material, generally accepted standards and methods for the registration of digital images are still lacking. Many different systems coexist, often developed in-house in response to ad hoc needs and based on traditional registration tools created for textual documents, resulting in internationally incompatible mixed-format systems. The two picture collections examined here, however, have opted for similar, standardized tools for registration and subject analysis, and while there are differences in their application and focus, they have both considered issues of cross-system compatibility.

The law (1988:870) concerning care of substance abusers is constructed in a way that gives the social workers room to interpret and apply the law individually. This may contribute to differences in treatment between female and male substance abusers. The purpose of the essay was to investigate whether the client's gender had any significance to how the social worker interpret and apply the law (LVM).The specific questions we worked around were:- What significance does the client's gender have in the decision-making?- Does the social worker's opinion about the law have any significance?- What factors can effect the social worker's interpretation and application of the law?- What importance do the social workers attach to prevailing norms about men and women when they interpret and apply the law?We chose to use a qualitative method to answer the above questions. Six social workers were interviewed and 39 LVM sentences were analysed.

Aluminium sulphate (Al2(SO4)3) is usually added during the drinking water treatment processin order to precipitate organic and inorganic material, resulting in aluminium-based drinkingwater treatment residual sludge (WTR). Since 2003 Swedish law no longer permits WTR tobe deposited in lakes, and there is an interest to explore the possibility to utilize WTR as soilamendment. The aim of this study was to examine the effects of WTR application on cropgrowth and concentrations of macronutrients and trace elements (including micronutrients andpotential toxic elements). A greenhouse pot experiment was conducted with three soils; a clayloam rich in phosphorous (P), a loamy sand rich in P, and a silty loam with a low soil Pconcentration, and two crop species Italian ryegrass (Lolium multiflorum Lam. cv.

This project is a learning CD-ROM production aimed at first-time parents. It is using both sound and images, moving as well as non-moving. The purpose of the production is to be an interesting alternative to traditional books. We have been looking at similar productions like drivers license educational CD-ROMs and encyclopedias for inspiration and ideas on how to proceed. In order to give the content some dynamics, we've also added the element of 3D-animated sequences. The application is supposed to be run as a simple executable file with flash embedded.

PR appears to be an indistinct division and a complicated resource for companies to value. The current circumstances are negative to the credibility and reliability of PR. This study emphasizes how an application of return on investment contributes to a more strategic use of PR and increases the status and credibility for the division.We experience that measuring the economic value of PR is of great importance and of current interest with few prior studies made. The purpose of this study is to find out how a PR-agency and one of its clients relates to and works with evaluation of PR-activities and to which extent the economic contribution of the activity is measured.The foundation which the theoretical reference grounds on is theories of Delusions of PR and the use of benefit-cost analyzes, Stages and Levels for Evaluating Public Relations Programs, Marketing Return on Investment and PR Return on Investment. The theoretical reference serves as a base during the analyze of the study.The conclusion, based on the empirical body of information, is that an application of return on investment could contribute with a higher status and credibility for the PR-division.

Future climate changes may lead to an interest of alternative and foreign forest tree species in order to spread the risks in forestry. Douglas fir, Sitka spruce, Freemont cottonwood and hybrid aspen are examples of popular foreign tree species that along with western red cedar could have a future in the Swedish forests.Södra Skogsägarna and SLU have collaboration in establishment of foreign species in Swedish forests.The purpose of this study was to analyze and present the establishment of western red cedar, and to survey and illustrate injuries of freeze drying and other damages like deer browsing, vegetation and insect attacks. The study included four different provenances, and spruce as a reference, planted in two locations ? Asa and Släne.Western red cedar is despite its name a conifer of the cupressaceae family with defined secondary characteristic and gets along well with an overstory. Western red cedar grows often in mixed stands with similar conifers and its natural habitat is within and in the area near to British Columbia.The study included two series of field inventories, one made in the summer and one in the autumn 2013, three growing seasons after plantation.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

Uppsatsen ger en överblick av vad synsättet Application Lifecycle Management (ALM) innebär. Enutvärderingsmodell beskriver de analyserade verktygens duglighet gällande ett antal funktionellaoch icke-funktionella krav. Modellen jämför kommersiella verktyg och uppsättningar med enmotsvarande uppsättning av Open Source verktyg. De huvudsakliga problemen idag är att de somnyttjar ALM-synsättet ofta blir begränsade till en kommersiell plattform, vilket får till följd att deinte kan bearbeta sådan data som inte stöds i plattformen. Ett annat stort problem är verktygenskostnad.

This study concerns design thinking and how to achieve usability when designing applicationsfor smart watches. The study's focus is on interaction and design for online auctionapplications such as Ebay and Tradera. After studying usability and design for devices withsmall screens, guidelines and design principles for interactive systems, we developed apaperprototype for an auction application. The prototype was used for testing our intervieweeswhile observing and asking questions. After collecting the data we analyzed the responses andfeedback on our prototype and combined the results to previous studies.

This thesis lays the foundation of the future routines of effective error repotring fortraffic devices in the raiway sector.If a device, for example a timetable display, stops working it is vital that the device isfixed as fast as possible so that the travelers dont miss any important information.The methods that are used today are old and not very effective. It can take time forthe repairmen to find the right device or locating the broken component. At the sametime he is supposed to maintain telephone contact with central control throughoutthe whole session.The need for a new, more effective, system is vital to make the whole repair pfocessmore effective and let the repairmen work without having to contact the centralcontrol by phone.I started this work by examining the possibilities of assigning every object with aunique identifier (ID tag) that could be accessed by a manual scan device. The ideawas that the ID tag could holw information about the object and be obtained byscanning the ID and get the information presented on a mobile device.The work also included building a internet application that enabled the reader to seeand change the information on the ID tag.The result was a database that stored information of different objects which could beobtained by scanning the ID tag and presented by a internet application..

Marknaden av smarta mobila enheter blir sto?rre och sto?rre och det kan vara ett bra sa?tt att na? ut med sin tja?nst eller produkt till den breda massan genom att driftsa?tta en mobilapplikation. De applikationer som kan installeras pa? de mobila enheterna och som anva?nder sig av enhetsspecifika funktioner kallas native-applikationer och a?r bundna till en plattform. De kan da?rfo?r bara anva?ndas av de enheter som anva?nder sig av den plattformen.

An analysis of a specific application of anaerobic wastewater treatment at a pulp and board mill, Stora Enso Skoghall, was carried out. A literature study was done and effluent wastewater from CTMP pulp production was analyzed. The analysis consisted of a broad constituent analysis and an anaerobic treatment trial. Results from these test where used to calculate the treatment effectiveness and resulting energy potential at the mill.The literature study and constituent analysis showed that toxicity of the water to be treated, due to wood extractives and sulphur content, was of concern. Detoxification chemicals targeting these constituents where used in the anaerobic treatment trial.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

The use of Web applications is a growing area. While the possibilities and functionalities are increasing, so is the complexity of them, together with the threats against them because the complexity also opens up the application to vulnerabilities. It is therefore important for developers to know how a web application can be developed with security in mind.This study?s intention has been to create an introductory documentation of what kind of techniques that exists which can produce higher security, which methods there can be within the development process and what to think about when programming secure web applications. In this paper we have investigated how theoretical manuals in the IT security department handles that area, and interviewed two developers from two different companies to see how they use security in their web applications.The study has an exploratory technical perspective and does not explain how to practically use and interconnecting different security-enhancing technologies, but is more suppose to give a first glance at what is available and sow a seed for those interested to continue reading further about the subject.