This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the Humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

To establish good horse welfare there are several factors that need to be considered. One important factor is the environment in which the horses are kept. In Sweden horses are stabled during long periods of time in the cold season and consequently the stable environment is even more important. The most essential environmental factors in a horse stable are ambient temperature, relative Humidity (RH) and concentrations of contaminants in the stable air. The air in a horse stable contains dust, noxious gases, moulds and microorganisms which all can contribute to developing respiratory diseases in horses.

Aerated steam treatment is a modern and environmental friendly method for seed borne fungus sanitation, mainly used on cereals. The method involves exposure to heat and high Humidity, factors which are known to induce a fast ageing of seeds, thus resulting in reduced storability. This thesis clarifies the interdependence between seed age and the aerated steam treatment intensities. Two studies were carried out in this thesis. In the first study the storage longevity of seeds treated with aerated steam was examined. The second study investigated the shelf-life of the pre-tests used to determine the aerated steam treatment tolerance of a seed lot, by testing the treatment tolerance of seeds aged prior to the treatment.

Evaluation of machinery costs is necessary for selecting appropriate farm machinery. Timeliness cost due to untimely operations is an important component of machinery costs. Timeliness costs can be high for crop sprayers, since pesticide application must be carried out within a short time interval. This Master thesis investigated the timeliness cost and the probability of a suitable workday for spraying. Timeliness factors were estimated for four different crops (oats, spring wheat, winter wheat and barley) using historical weed trial data.

Today the individual ventilated cage system (IVC-system) is the most commonly used system when housing rodents. IVC systems are designed to control both supply and exhausted air at cage level, as well as temperature and relative Humidity in the cages. This creates an optimal environment for the mouse and at the same time a protection against the risk of cross-infection between cages and the outside environment. The aim of this study was to evaluate the health and welfare for two different strains of laboratory mice (NMRI nude mice and C57BL/6NCrl mice) in three different kinds of IVC-systems; Arrowmight, Allentown and Tecniplast. 108 mouse pups from each strain (in total 216 mice) were selected after weaning at an age of three weeks and tested during 5 weeks.

This report describes an investigation of the indoor climate in two different workspaces. Since we a big part of our lives are staying indoors in artificial environments, and more particularly in our workplaces, we think it would be interesting to do this investigation. The technical solutions for air treatment systems began with simple natural systems without fans and where the thermal rise of the air applied. In modern time is technical air treating systems used to take care of the fresh air supply. This type of units can supply filtered air with the right temperature to the building. Well-functioning ventilation is essential to bring clean fresh air to the room and effectively remove impurities without sound- or draught problems. The indoor climate is relevant for the output capacity.

In order to facilitate testing of anesthesia machines a patient simulator has been required by Maquet Critical Care AB. A patient simulator has been developed to reduce expensive and time consuming animal experiments and temporary lab arrangements. The patient simulator has been developed and designed to simulate human lungs with regards to anesthetic uptake, production of carbon dioxide and heating and moisturizing exhaled air.The system comprises a container and a test lung to simulate the volume and the dynamic of the human lung. The simulation of uptake of anesthetics has been implemented by pumping a fraction of the gas from the container through a bypass circuit with an active charcoal filter that adsorbs volatile anesthetics. The flow through the bypass circuit is generated by a pump and is controlled by a linear valve.The resulting performance of the patient simulator has fulfilled the requirements.

Gerbera jamesonii is a plant with a large amount of pollen and various flower colours and a favourite host plant for Frankliniella occidentalis. The best growing temperature for gerbera is approximately 20°C. Frankliniella occidentalis or the Western Flower Thrips is a small insect that has become an important pest in greenhouse cultivation all over the world. The high temperatures in the greenhouse are favourable for F. occidentalis.

SAMMANFATTNING När man i tidigare undersökningar studerat betesgång för mjölkkor har klimatet på betet inte beaktats. En höglakterande ko producerar mycket värme som hon måste avge till sin omgivning för att kunna bibehålla sin kroppstemperatur. De sätt som djuret kan avge värme på är begränsade och påverkas av flera klimatfaktorer samt djurets genetiska och biologiska förutsättningar. Antalet dagar som registreringar gjordes under denna studie blev av flera olika anledningar få, 18 dagar. Klimatet utomhus under studien registrerat som globtemperatur varierade från 22,4 till 34,7ºC. Då djurskyddslagen skall främja djurens hälsa och djurets naturliga beteende fick en grupp 126 höglakterande kor möjlighet att välja uppehållsplats under tiden 26 juli till 11 augusti. 2004. Korna fördes ut på betet vid niotiden på förmiddagen och var därefter fria att gå in och ur stallet efter egen vilja tills de togs in för kvällsmjölkning omkring klockan tre påeftermiddagen.

Sweden has distinct seasons with cold winter and temperatures down to minus 25 ?C andpleasant summers with temperatures above 20 ?C. During spring and autumn there could becomechallenges with precipitation. The diverse climate in Sweden affects many homeowners. For thepeople living in leisure boats and permanent housing boats the seasonal changes are clearlyimpacting their economy and the indoor climate.

This is a 15 hp (10 p) thesis in biology at the programme for Horticulture Management at the Swedish University of Agricultural Sciences, Alnarp. In this literature study we have processed, reviewed and arranged facts and research, to make it more available for those who want to know more about establishment or cultivation of mosses. Our client is Fredriksdal?s Museums and Gardens in Helsingborg who are planning to establish a moss garden. The information is meant to be used by Fredriksdal and other similar facilities.

This thesis aims to present the essential background on how to perform climate changeimpact assessments, and to present the results from a climate impact assessment on waterbalance and nitrate leaching for an arable Swedish soil. The soil is a sandy soil in southwesternSweden, grown with spring cereals. This study is meant to be a benchmark example,and cannot be seen as a regional or national assessment for Sweden, rather as an approachto present and analyze the most important parts of these kinds of assessments.A dynamical simulation model (COUP, Jansson and Karlberg, 2004) was used for thisstudy. The model was parameterized and calibrated against data from an experimental site,located in Mellby in Hallands county, south western Sweden. Measurements were carriedout between 1st of April 1988 and 1st of April 1991.

This thesis aims to present the essential background on how to perform climate changeimpact assessments, and to present the results from a climate impact assessment on waterbalance and nitrate leaching for an arable Swedish soil. The soil is a sandy soil in southwesternSweden, grown with spring cereals. This study is meant to be a benchmark example,and cannot be seen as a regional or national assessment for Sweden, rather as an approachto present and analyze the most important parts of these kinds of assessments.A dynamical simulation model (COUP, Jansson and Karlberg, 2004) was used for thisstudy. The model was parameterized and calibrated against data from an experimental site,located in Mellby in Hallands county, south western Sweden. Measurements were carriedout between 1st of April 1988 and 1st of April 1991.

Stem rust, Puccinia graminis, has caused enormous yield losses throughout history which have had significant consequences for oat and wheat production. Today in Sweden stem rust is only reported from rye, oats and wild grasses. Stem rust infections in wheat have become unusual due to the general use of resistant wheat varieties and also due to the eradication of barberry, Berberis vulgaris, the alternate host for P. graminis. According to international sources, new races of P.

SAMMANFATTNING Uppskattningsvis transporteras 171 miljoner grisar inom EU varje år, varav ca 3,5 miljoner i Sverige. Grisarna kommer, under hela förloppet från förflyttningen från box i stallet till bedövningen i slakteriet, att utsättas för stressande moment. Orsakerna är bland annat omgrupperingar, nya miljöer, vibrationer i bilen samt, speciellt under sommaren, värmestress. Temperaturen i djurtransportbilen är en nyckelfaktor som dessutom kan förstärka effekten av andra stressorer. Lastning i höga temperaturer ökar risken för värmestress. Värmestress innebär att djuren får allt svårare att avge sin värme. Även den relativa luftfuktigheten har betydelse, framförallt vid temperaturer över 30°C. Det är ventilationen i transportbilen som ska transportera bort värme och fukt från bilen.