Saab Training Systems (STS) in Huskvarna is manufacturing material for educationalpurposes to armies worldwide. They are now implementing parts of the Lean productionconcept in their organisation.One part of the work with Lean production is to eliminate waste. To be able to identify waste,value stream mapping is a good tool and also what we used in our thesis. To gain a betterefficiency in the production of Personnel Detector Device (PDD) flow was one of our goals.The PDD is a harness used during battle training which registers if the user is being hit by itsenemy.Our work with the thesis started up with a short education in Lean production and in valuestream mapping (VSM). The work proceeded with a VSM of the production flow of the PDD,interviews were made and studies of literature were done to gain greater knowledge of thesubject and solve the task.The VSM resulted in five areas which were followed up out of those six we identified.

The purpose of the work is to analyze and balance an assembly line at Fläkt Woods in Jönköping. The work is going to answer the questions about today?s throughput time, how much waste that occurs, number of staff at the assembly line, how the supply of material works and possible improvements that can be made at the work stations. The work is also going to give a proposal of improve-ments that can be made.The methods used to get the result include observations and measurements, con-versations with technicians and operators and also data from Fläkt Woods? data-base.Large variations in throughput time are measured during the measure period, from 3 hours up to 5 hours and 35 minutes.

When the producers? responsibility for packaging was introduced in Sweden in 1994 the industry set up public recycling stations to facilitate the collection of the waste material. In order to establish recycling stations at suitable locations the municipalities assist the industry?s service organization for operation of the recycling stations, the Package and Newspaper Collection Service (Förpacknings- och tidningsinsamlingen, FTI). The objectives of this thesis are to improve the service of the public recycling stations within Lidingö town and to increase the accessibility to these stations for the inhabitants of Lidingö.

This essay examines how the author of 1 Peter exhorted Christ-believing slaves and wives in 1 Pet 2:18-3:6, a passage that invites questions about submission, questions that, in contemporary contexts, are oftentimes controversial. The essay also calls attention to the advantages and the complexities of understanding 2:18-3:6 relative to ancient Roman familial and hierarchical structures. A close exegetical analysis of the passage points out a variety of scholarly viewpoints on ?Peter?s? admonitions to slaves and wives. Following the exegetical analysis, attention is given to feminist hermeneutics and to potential uses of this biblical text in contemporary contexts.

The construction industry can contribute to a healthier sustainable community. A development that is going on right now is by using more prefabricated volume- and plan elements on the construction sites. Building with this method not only provides a benefit to the environment, but also reduces production rates by taking up to 80 percent less time to build. By building in this way it will be easier to recycle and keep all the material that otherwise would go to waste. Also by building inside a protected environment, the material retains its good quality.This report will take forward proposals on further development of prefabricated volume element of wood, by first presenting this construction methods advantages and disadvantages..

Idag ställs stora krav på företag att vara miljömedvetna och resurseffektiva i sin verksamhet. Vid mjukpapperstillverkning används stora energimängder och inom industrin har det under många år funnits en strävan att energieffektivisera processer och att tillvarata spillenergi, bland annat genom värmeåtervinning. Valmet Tissue Technology Center i Karlstad har idag en pilotmaskinen utan värmeåtervinningssystem. Den här undersökningen gjordes i syfte att ta reda på hur stor återvinningspotentialen är för värmeväxling i pilotmaskinens torkpartier, bestående av Yankeekåpan och TAD-cylindrarna. Tre maskinkoncept undersöktes: DCT®, NTT? och TAD.

Eutrophication of the Baltic Sea and Swedish lakes remains a major problem despite many years of effort to reduce the emissions of nutrients. One major source is waste water systems, especially private sewage systems. These sewages accounts for a very large share of nutrients per capita in comparison with citizens connected to larger sewage treatment plants. Norrtälje community has the greatest number of private sewage systems in Sweden. Discharges of nutrients, especially phosphorus, to the Baltic Sea from these sewage systems are significant.

Syftet med rapporten var att studera möjliga återvinningstekniker för Ragn-Sells. För detta användes litteratursökning och intervjuer. Återvinningstekniker som studerats är mekanisk bearbetning, mekanisk återvinning, kemisk återvinning och viskostillverkning. Flera underklasser till dessa metoder studerades också, liksom flera sätt att tillverka återvunna produkter. Rapporten nämner ett urval av återvinningstekniker och försöker inte nämna alla tillgängliga återvinningstekniker.Återvinningsteknikerna har sorterats enligt prioriteringen i EU:s återvinningsdirektiv (2008/98/EG).

SammanfattningEn ånganna monterades i EGR (Exhaust Gas Recirculation) slingan på en 12,7 liters Scania Euro V motor (DC1306). En modell som beskriver Rankine cykel togs fram med vatten som köldmedium i simuleringsverktyget GT-Power. Ångpannan i GT-power modellen kalibrerades m.h.a experimentell data.Simuleringarna visade att det optimala ångtrycket, det trycket där högst effekt kan erhållas från expandern, är beroende av EGR temperaturen. Det innebär att ju högre EGR inloppstemperatur desto högre optimalt ångtryck. EGR temperaturen i punkt 2 i ESC cykeln är 514? C för denna motor, vilket resulterar i ett optimalt tryck på 120 bar enligt simuleringen.

This study aims to analyze the risks with building new households between railroads and shore, the focus of the study lays on Öbacka strand in Umeå municipality. The study also investigate if a land use conflict has taken place and how it was handled.The paper is based on different documents that was central for the work of planning the households and some interviews with operators that was highly involved with the planning of the area.The results shows that there is several risks with establishing new household between railroads and shores. Mainly because of the exposure of noise from the railways, though the risk for impact on the living environment for animals were low in this case there is a generally risk that it could get negative effects. It also a very important that the availability to the shore is secured. Planning in this type of area involves a great number of operators can easily cause a conflict due to the different perspectives on how the land should be used in the future, and also because of protecting different interests.

The ever-growing e-commerce brings many opportunities for society's consumers and businesses. Digitization has strongly contributed to these opportunities and has, among other things, facilitated the search for information and increased the range for the customer. While the opportunities are many, the increased consumption has also brought consequences. The increase in consumption contributes, among other things, to quantities of deliveries and returns as well as increased waste, all of which results in environmental destruction. The issue of sustainability is very topical today and is influenced by almost everything today. In connection with the markets changing, the consumers' behaviors and expectations also change.

The purpose of this study is to facilitate sustainable building by the use of BIM. The goal is to determine which aspects of sustainable building, which can be analyzed mainly with BIM tools, but also other aids.The study is based on literature studies and interviews. The literature review examines aspects important for sustainable building by studying environmental certification systems applicable in Sweden, as well as the BIM tools available on the market to analyze these aspects. The literature also includes the concepts of BIM and sustainability in order to provide a clearer view of its meaning. The interviews have brought the study's overall understanding of the industry and guidance on the subject.The results are presented in a table, where the aspects relevant to sustainable building are listed.

The purpose of this study is to facilitate sustainable building by the use of BIM. The goal is to determine which aspects of sustainable building, which can be analyzed mainly with BIM tools, but also other aids.The study is based on literature studies and interviews. The literature review examines aspects important for sustainable building by studying environmental certification systems applicable in Sweden, as well as the BIM tools available on the market to analyze these aspects. The literature also includes the concepts of BIM and sustainability in order to provide a clearer view of its meaning. The interviews have brought the study's overall understanding of the industry and guidance on the subject.The results are presented in a table, where the aspects relevant to sustainable building are listed.

Mitt examensarbete fra?n Designprogrammet ? ha?llbar utveckling, a?r en under- so?kning av flera dimensioner. Det o?vergripande arbetet a?r ett platsspecifikt insamlande av framtida visioner hos inva?nare, kommun och kreato?r. Visualiseringen involverar samtliga av de ovan na?mnda parterna i skapandet av en ny mo?tes- plats i ett medialt kategoriserat miljonprogramsomra?de.

Mitt examensarbete fra?n Designprogrammet ? ha?llbar utveckling, a?r en under- so?kning av flera dimensioner. Det o?vergripande arbetet a?r ett platsspecifikt insamlande av framtida visioner hos inva?nare, kommun och kreato?r. Visualiseringen involverar samtliga av de ovan na?mnda parterna i skapandet av en ny mo?tes- plats i ett medialt kategoriserat miljonprogramsomra?de.