We live in a time where the influence of citizens is taking a larger role in the spatial planning. The Swedish laws, such as PBL, deals with matters of citizen participation which advocates that the youth should be included in the consultation circuit, but there is no directive given.  The report's purpose is to demonstrate methods for how to get the young people's influence included in the spatial planning, with a main focus on the ages between 13 and 21. On the base of literature and two case studies, the goal is to illustrate how to integrate young people through a meeting place in Jonkoping, Sweden. The report is structured along with an analysis based on the literature, two case studies from previous projects and discussions/interviews with young people from four selected areas in Jonkoping.  The case studies from Malmo and Gothenburg show how the cooperation between different participants can be organized during the planning and how to give the users a greater involvement. Based on literature and case studies, we carried out a field analysis of the four most segregated areas of Jonkoping; Osterangen, Oxnehaga, Ekhagen and Raslatt.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

Powder Metal (PM) gears are machine element components which operate under the same principle as conventional gears, but, due to their intrinsic material characteristic need to be designed slightly different, and its manufacturing process offers advantages previously unobtainable by conventional steel gear manufacturing methods. The use of PM in similar applications, such as synchronous hubs, makes them a suitable candidate for production in such material. The current master thesis work focuses on gear design using PM by utilizing finite element method (FEM) to reduce weight and inertia taking into account root bending strength and tooth deflection.First a topological optimization is used to determine feasible candidates for different web designs which have as objective to reduce volume, similar topologies were shown during different loading conditions; and hence, this topology was chosen as a suitable candidate. A shape optimization of the topological candidate was performed having as state variables root bending strength, independent for compressive and tensile side of the tooth loading; and tooth deflection, which in concept can be correlated to static transmission error (TE).Another aspect in this thesis analysed is the possibility to incorporate non-trochoid root geometry, a trochoid root is always present when machining with a hob, into the gear root and hence reduce the stress concentration here. Due to the use of PM, a non-symmetric optimized root can be achieved and hence be optimizing compression and tension.Results showed significantly lower inertia, for example certain results showed 40% reduced when compared to solid gear, with adverse effects as increase in tooth deformation and increase in maximum principal stress.

Bachelor thesis, Trolley Innovation Project, has been unique in the sense that it has been carried out over the borders of Sweden. Iacobucci S.p.A, located outside of Rome in Italy is one of the largest manufacturers of interior equipment for aircraft in the world. With approximately 30% of the market Iacobucci S.p.A is one of the world's largest manufacturers of catering trolleys.The aim has been to produce a new competitive catering trolley for the airline industry. With customers and users in focus, the project team found that weight, ease of use, ergonomics and design were important aspects. Having a low weight of all the interior is particularly important when there is lots of money for the airlines to save in reduced fuel costs.

Background: It has been shown that EDI can yield positive effects within companies. Which effects are possible for a company to direct assign to the introduction of EDI and is it possible to estimate the total effect.Purpose: The purpose of this study is to estimate and analyze the effects of using EDI in electronic business. We also want to contribute with a model for measure and estimate the effects of EDI.Accomplishment: We have studied literature concering EDI and realized a preliminary studie in form of interviews with experts to establish deeper knowledge of EDI. We have also tried to estimate the effects obtained in companies in three different businesses, power, government and transport industry.Result: To obtain as good effects as possible it is important that the co- oporation is built on trust and engagement. Before implementing the EDI-system a thorough overhaul of the processes in the company should be done, involving both the top managers and the staff.

A lot of mine waste rock and tailings arise from all mining processes and have to be stored in an appropriate way. Tailings are deposited in impoundments retained by tailings dams. The objective of tailings dams is to retain the slurry from the mining process and in that way prevent spill into the surroundings that might be harmful for the environment. Tailings dams are often constructed as staged embankments so that construction costs and demand of materials are spread more evenly over the period of deposition.The objective of this thesis has been to compile information about and evaluate events at Swedish tailings dams and also to develop a collective database for all Swedish mining companies for all tailings dams and all events that occur at tailings dams.Information about 60 events at Swedish tailings dams has been gathered and evaluated. The evaluation has been performed by comparison between and analysis of individual parameters and also by use of a multivariate statistical method called PLS.

Our employer Camatec Industriteknik AB gave us the assignments to increase theirs range of versions on Camcoil that is their own patent product. Camcoil is a capstan system that is used when steel band fabricated. Exist for example in production lines their steel band should be annealed. Our goal with this work is to come up with a completed production basis on a Camcoil for heavy industry. The basis should contain calculations, 3D-constructions, drawings and cost proposal on manufacturing and detail purchase.Demands on this project:1.

During our formative years, technology has always had a natural part of everyday life, and for us technology has never been particularly gendered. If this depends on the climate and the attitude of our homes, ourselves, the combination of both or something completely different is a question we have asked ourselves at times. But our approach to technology does not seem as obvious to all women, and today the IT industry is heavily dominated by men. This has meant that we have asked the question whether there is any underlying reason why so few women opt for IT courses? Is there a link between how different IT organizations profiles and the prevailing gender ratio? The purpose of this study is to investigate whether there is any connections between how IT organizations are related to gender issues and how the structures, attitudes and gender actually looks like in the IT industry today, and how this can be seen in their branding efforts.

Byggsektorn står för en stor del av de emissioner som påverkar klimatet negativt. Byggmaterial baserade på trä påverkar den globala miljön mindre negativt jämfört med alternativa byggmaterial som betong. Trähusindustrin kan därför anses ta ett miljömässigt ansvar eftersom deras produkter har en lägre klimatpåverkan, vilket bidrar till att minska byggsektorns totala miljöpåverkan. Informationen om träbyggandets klimatfördelar behöver också kommuniceras för att skapa möjligheter för kunden att göra miljömedvetna val vid köp av hus. Idag tenderar trähusindustrin att marknadsföra kostnadseffektiva fördelar i större utsträckning än miljömässiga sådana.

Study objects: JM, Folkhem and ABB.Purpose: The purpose with this study are to examine how the supplier relations are in the construction branch and compare that result with how the supplier relations are for ABB a production company.Theoretical: The theoretical chapter illustrates important and relevant parts of supplier relations, purchasing and supplier strategies to give good overview. The theoretical review will combine information from different fields to consent with the research problem.Method: A case study has been made on three different companies, one of the companies was active in the production industry the other two were active in the construction industry. Data was mainly collected through semi structured interviews on each of the three companies.Conclusions: The size of the company decided which point of view the company had on purchasing, traditional or modern view. All three companies had a centralized purchasing organization but the construction firms were more decentralized than the production company. The reason was that the construction firms were dependent with more flexibility when every construction project is unique..

Research question: How does the industrial company Scania work to get more women in leadership positions?Purpose: The purpose of this work is to describe how companies in a male-dominated industry can work to get a higher share of female leaders.Method: This survey was based on a deductive approach with a qualitative method. Theories have been obtained primarily from scientific articles and the empirical part has been collected through interviews from the companies Wiminvest and Scania.Conclusion: The conclusions the study came up with was different elements that companies in male-dominated industries can work with to get a higher share of female leaders. The first thing that companies can do is to join the project BON or similar projects to work on this issue. They can work with workshops and lectures to disseminate knowledge about the topic.

Abstract Title: How to source from Russia? - A multiple case study of six companies? experience of purchasing in Russia. Authors: Richard Werthén, Technology ManagementJohan Öhlén, Production Engineering and Management Supervisors: Christer Kedström, Dept of Business Administration Johan Lundin, Dept of Industrial Management and Logistics, Engineering LogisticsRolf Blomgren, Purchasing Manager SR, ScaniaLars Erik Nerback, Purchasing Director SE, Scania Issues: The issues presented are:? What characterise Russia as a supplier market?? Which sourcing experiences have been made by other Swedish companies in Russia?? How can this knowledge be utilised at Scania? Purpose: The purpose of this master thesis is to find out whether it is worthwhile for Scania to look for new suppliers in Russia, based on other Swedish companies? experiences of purchasing in the country. Method: In order to answer the purpose of our thesis the study of Scania?s purchasing organisation has to be complemented with in-depth studies of other companies? purchasing organisations.

The public relations business has grown from almost nothing to a large international industry the last decades. Throughout the history the industry has struggled with a lot of critique and public relations has become a negative symbol for manipulation of information. Because of this negative view of the industry and the medial change taking place, the purpose of this study is to investigate how two different generations think about public relations. More accurate, the study will through a qualitative interview study explore how young people from a highschool in Luleå and elder people from Luleå township thinks about pubic relations, and most imortant why they have this particular view. By creating four focus groups, two with men and two with women, this also enables a comparative study between the gender. The focus groups were later analyzed and compared to two selected groups of theories on public relations, the theories were positive and critical theories compound in two categories.

Syfte: Syftet med denna uppsats är att analysera utvecklingen av användandet av elektroniska business-to-business auktioner, utifrån ett kundperspektiv i fordonsbranschen. Metod: Denna uppsats präglas av den kvalitativa metoden, för att därigenom ge en ökad förståelse kring utvecklingen av användandet av e-auktioner. Inledningsvis har en litteraturstudie genomförts, varpå intervjuer med representanter för företag i fordonsbranschen gjorts. Slutsatser: Som utgångspunkt har vi valt uppskattningen att e-auktioner skall motsvara 25 procent av den elektroniska B2B-handeln i fordonsindustrin 2002. Det råder en övertygelse om att en betydande missräkning gjorts.

ÅF Test Center in Borlänge had a need to expand their capacity for compressive and tensile strength tests. They wanted to do this by using a hydraulic cylinder, which they already possessed, to apply the force with. This required a load receiving structure. The aim of this work was to design and dimensioning a test bench for a cylinder marked NIKE 300 tons. The work would result in a completed design proposal on a test bench which could manage to run the compressive and tensile strength tests of up to 3000 kN.