The construction industry is always looking for ways to make the work more efficient aswell as minimize the waste of money in general. At the same time the industry is showing alow awareness of logistics which has to increase in order to improve the industry in thesekind of questions. Projects located in the inner city have high demands on the logistic andthe handling of material due to the so often limited space for storages of the material. Dueto this the purpose of this report is true a case, study and analyze what kind of factors thereis to take into consideration during the materials way from the supplier to the workstationin a project located in the inner city. The data for the report was collected with the help of acase study, and in three different ways.

This master?s degree project concerns the combination of a multi dwelling passive house with solar energy for the generation of electricity and domestic hot water (DHW). Different alternatives with either solar thermal systems or photovoltaic (PV) systems are compared with two reference alternatives producing DHW from electricity or district heating. The economical comparison uses a life cycle cost (LCC) perspective based on the present value of expenditures for investment, energy and annual operating and maintenance.The energy yields from the solar energy systems were calculated by hand and with simulation software. Calculation and dimensioning of PV systems were carried out with a software called PVSYST.

The concept Corporate Social Responsibility (CSR) describes a company's social and environmental work. More and more companies have embraced the concept of CSR and for some businesses, it has become equally important to present its efforts within CSR as to present its latest profits.The purpose of this essay is to establish an overall picture of a company's CSR efforts and to discuss the potential conflict between CSR and the aim for profit We investigate how businesses can improve their CSR effort so that it contributes to a positive development for the society while still creating economic value for the company. The study is based on a qualitative study of four Swedish companies in the fashion industry: Kappahl, Gina Tricot, Åhlens and Indiska. The results show that according to the theoretical framework, the four companies do not reach a complete strategic approach to CSR. To achieve this it is necessary for the companies to change their current CSR-activities..

The beauty industry has experienced a turnover increase of 220 % the last 20 years (Jones, 2010). At the moment the market for men's skin care is seeing the fastest growth rate in the cosmetic industry and multinational companies such as Procter and Gamble and L'Oréal have identified a "multibillion-dollar potential" within the segment. BUT - fresh research from the category leading company L'Oréal, shows that only 48 % of the male consumers use a skin care product specially adapted for men. It further shows that as many as 28 % of these do not even know how that skin care product got into their bathroom cabinet. The purpose of this paper is to get a deeper insight into men's relationship with skin care products and grooming.

The construction industry is always looking for ways to make the work more efficient aswell as minimize the waste of money in general. At the same time the industry is showing alow awareness of logistics which has to increase in order to improve the industry in thesekind of questions. Projects located in the inner city have high demands on the logistic andthe handling of material due to the so often limited space for storages of the material. Dueto this the purpose of this report is true a case, study and analyze what kind of factors thereis to take into consideration during the materials way from the supplier to the workstationin a project located in the inner city. The data for the report was collected with the help of acase study, and in three different ways.

In today?s modern age, energy consumption has become a major issue, both from an environmental viewpoint and cost perspective. Because of a rapid technologic change and increased costs of production of electricity, the demand to develop effective methods for energy efficiency industries have grown.The electricity-intensive industries, such as plastic industry, the demand to reduce energy consumption has grown significantly over the past 10 years, which have led to the development of different methods to determine and locate energy-consuming parts in the industry. This also means being able to prioritize and organize activities in the industry.In this study the measurements of voltage, current, power and PF performance on injection molding machines (K-TEC 275 form Ferromatik Milacron in Germany) with a focus to locate, within a machine, various measures that could improve energy use in the plastics industry, in this case RostiGP in Gislaved. These measurements have been carried out with the help of a power quality clamp meter to carry out time logs of the machines for some time during normal word rate.

Employee turnover can cost an organization a significant amount of money. In addition, retention of employees can beneficial towards to an organization as it e.g. allows to save costs related torecruitment and training of new employees. The fast food industry is recognized as an industry which employs low-skilled employees and is especially in the United States known to be prone to high employee turnover. With regards to Europe, only little information is available in the field of low-skilled employee retention in the fast food industry.

This report, written by Ma?ns Ridze?n and Jonas Stenberg, presents the thesis carried out the spring of 2012. The authors met the first time in 2008, when they started their studies at Uppsala University. Since then they have completed various projects, both within and without the university. This study is based on a theory that was first conceived when Jonas Stenberg did his internship in the summer of 2010.

Latvia has been an independent state twice, the first time during the years 1918-1940 and the second time from the year 1991 and ahead. During these two periods Latvia has been a destination for tourists. The aim of this study is to describe how Latvia as a destination has developed during the years of independence. One further aim is to compare what Latvia?s tourism industry looked like during the same periods to descry similarities and differences.

When an error occurs in an IT system that is vital for the production of a major industry, the consequences can be great. To quickly identify and correct errors is important as a stop in a system can lead to a break in production, which is costly for the industry. Our task in this thesis has been to develop a system for ÅF that facilitates the debugging process of the system Paperline. The system's target audience is ÅF-call personnel that provides support for Paperline 24 hours a day if something goes wrong. The system consists of a Windows service, a database and a web application and is developed mainly with the techniques C#.NET, MVC 5, Google Charts, Javascript, HTML, CSS, and Entity Framework.

We have 3G on the doorstep but nothing seems to attract ordinary people to this technology. To attract the mass market the telecom industry must show something beyond high bit rates. They must show how ordinary people can take advantage of this new technology. This is done by showing the possibilities of the new technology and by demonstrating applications that it will handle. The telecom industry must convince the telecom operators to invest in this technology and the only thing that matters to them is how much revenue they can make by adopting the upcoming technology.

Rapporten beskriver arbetsgången vid utvecklingen av ett kompressorkit till Yamahas snöskotermodell RX-1. Arbetet innefattar konstruktion och dimensionering av tryckkammare och laddluftkylare. Datorverktyg i form av CAD (Computer Aided Design) och FEA (Finite Element Analysis) har använts till att konstruera och dimensionera ingående komponenter. Arbetet har resulterat i kompletta CAD-modeller av ett prototypkit färdigt för CAM- beredning (Computer Aided Manufacturing) och tillverkning..

In this thesis the survival and development of a yearly recurring event will be examined. The purpose of this work is to examine how the festival Stockholm Pride has developed and to find out what underlying factors and conditions that lays behind the development. Also being examined is how the event affects Stockholm city?s tourism industry. To be able to fulfill the purpose of the thesis a qualitative research has been used and two persons with allot of knowledge about Stockholm Pride and Stockholm?s tourism industry has been interviewed.

The primary focus of this Master thesis is to study how industrial house building can be implemented during production of rental flats under the terms of public procurement. In order to determine a suitable working process as well as presenting a possible architectonic result of the process, a case study is carried through.A housing projekt is designed on a site i Malmö, where the commisioner is MKB Fastighets AB and the contractor is NCC Komponent with the industrial building system NCC Komplett. The focus of the design is to accomplish high quality apartments to a resonable price, as well as solving the overall scheme for the site.The housing projekt, Kv. Flaggskepparen, built on the consept of a single house model, used to handle the entire site, shows that the building system is well suited to accomodate the commisioners demands.In order to reach the best possible architectonic result with the building system, cooperation initiatded in an early stage of the process is neccesary.A model is proposed to handle the situation under the terms of public procurement. The model suggest that the geometrical design is mainly carried out after inquiry and that architectonic qualities should mainly be defined in a non geometrial way for inquiry..

Unlike the manufacturing industry, the construction industry is always in motion. Each new construction project brings new opportunities, and it requires a new plan, new organisation, and new suppliers. All construction projects are very different from each other and in terms of a logistical perspective, this is very weak as it makes it difficult to get a flow in the production and to make flawless routines. The way the external and internal logistics are managed, can effect the final product in the time taken to produce it, the quality of the product and the profit made from it. When internal logistics are handled poorly, it could result in materials not being at the right place at the right time, or information not going through to the right person.