This is a thesis performed at GEMS PET Systems AB in Uppsala. GEMS PET Systems AB is a company within GE Healthcare. GEMS PET Systems develops and manufactures equipment for manufacturing of radioactive isotopes for PET which is a scanner used in medical applications. The systems includes an accelerator of cyclotron type and other support equipment. One system is shipped in two or three containers depending on order configuration.

Man's life has changed in many ways since technology made it?s entry for public at large. In response to this change the science of human-machine interaction was invented. It has in turn evolved into human-computer interaction. With this science the focus is on the customization of the system for the actual person who will use it.The thesis has been implemented in a telecom company's development department.

Swedish healthcare systems have endured harsh criticism from healthcare professionals because of their inability to understand healthcare processes. These systems have been identified as significant time consumers, and Swedish healthcare is therefore facing a major challenge to assure patient safety. The following paper is based on a workplace study, which aims to examine healthcare systems? impact on physicians? practices. Our findings show that physicians spend substantial amounts of time chasing information, rather than managing information and pursuing healthcare.

The Work has been performed to, and in cooperation with Vetlanda Energi och teknik AB.District heating for commercial purpose started in the USA in 1877. Today the network has grown into big and complex systems, which demand maintenance and service to keep up the security of the delivery. When a district heating network expand, it becomes difficult to perform reliable calculations. For this purposes there are a few suppliers who design and deliver systems for documentation and calculation of district heating networks.Vetlanda Energi och Teknik AB is in the position where they must get a system for documentation and calculation for district heating, and therefore they need a basis to get a system. The target is to write a requirement specification that will follow the basis.The Swedish market has been inventoried, and suitable systems have been selected.

To support, enhance and, in the future, develop the activity within the county councils in Sweden, IT support systems are currently used to a large extent. The need to document is central to the health care organizations and the counties have come a long way in the introduction of electronic patient record systems (EPR). The aim of the EPR systems is to support the care processes and the clinical professions in their work.This is a master thesis in the area of human-computer interaction (HCI), Department of Information Technology at Uppsala University. The aim of the thesis was to describe and compare the five most common EPR systems in Sweden. The comparison will focus on some usability aspects and on how well they support the users in their clinical practice.

The Swedish building and property management sector are responsible for about 30 % of the total energy use. In order to take environmental consideration, different environmental assessment tools and standards are used. Miljo?byggnad, Svanen, FEBY12 and PHI are some of these. There has been increased interest to certify buildings and therefore it is of interest to evaluate the assessment of the energy field to see if relevant energy aspects are assessed.

The Work has been performed to, and in cooperation with Vetlanda Energi och teknik AB.District heating for commercial purpose started in the USA in 1877. Today the network has grown into big and complex systems, which demand maintenance and service to keep up the security of the delivery. When a district heating network expand, it becomes difficult to perform reliable calculations. For this purposes there are a few suppliers who design and deliver systems for documentation and calculation of district heating networks.Vetlanda Energi och Teknik AB is in the position where they must get a system for documentation and calculation for district heating, and therefore they need a basis to get a system. The target is to write a requirement specification that will follow the basis.The Swedish market has been inventoried, and suitable systems have been selected.

The purpose with this study is to compare different systems of grain storage from a financial point of view. Grain that is supposed to be fed to laying hens. The systems that were compared were different airtight storage of grain and a system of conventional storage. To make this case study I choose to compare four different systems. In the case study there was one system with bin drying of the grain, two systems with airtight storage of the grain and one system where you buy dried grain during the season. I made several of capital investment appraisal where I found the cost of each system, then I took the cost and divided it with the total grain use and calculated the cost for each kilogram of grain, and also the cost of the feed. Then I compared the cost from my case study with the cost of buying feed. All the systems except for one, gave a lower cost for the hen feed than buying feed from a dealer The best system, witch were bin drying lower the cost with about 80 000:- SEK.

Inom en stor del av all systemutveckling sker testerna av systemet som sista punkt innan systemet sjösätts. Testdriven utveckling är en systemutvecklingsmetod där testerna istället skrivs först och också är det som driver utvecklingen framåt.Metoden höjs till skyarna av vissa och avfärdas omedelbart som onödigt omständig av andra. Vi vill med denna uppsats undersöka hur det ser ut i verkligheten och vilka faktorer som påverkar användandet, inlärningen och inställningen till testdriven utveckling.Vi genomförde intervjuer på tre stycken Örebrobaserade organisationer och tittade utifrån ramverket method-in-action på vilka faktorer som påverkade användningen och varför.Vi fann att utvecklarna närmade sig testdriven utveckling på väldigt olika sätt och grundade sin inställning mycket beroende på tidigare erfarenhet och inlärning ? oavsett hur lång eller kort den varit. Utvecklarna förväntas ofta bedriva självstudier utanför arbetstid ? något som inte alltid funkar som kunskaputvecklingsform då tiden utanför jobbet ser olika ut beroende på var i livet man är.

Simulation means running a model of a system with suitable input and observing the corresponding output. Real-time environment simulation is a special kind of simulation used to simulate a control system's environment in real-time. This is done to test the control system before it is used in its real environment. In this project, computer simulation of a certain kind of environments, called track-based systems, is studied and a general model for track-based systems is developed. In this model, track layouts are represented by graphs, which is a flexible and extensible representation and a method for visualizing these layouts is presented.

This project was started within the Market-Design programme of Elforsk, with the aim of developing representative test systems of Swedish distribution networks. Using such test systems as a basis for reliability and customer interruption cost calculations makes it feasible to analyse the network tariff regulation of Swedish power  istribution companies. In particular, it enables studies of the incentives for companies to invest in system reliability. Until now, the available test systems are either not representative of Swedish conditions, or too small in scale and limited in function.Within this project we have created two test systems. In order to represent the diversity of actual Swedish distribution networks, we have created one test system for urban environments and another for rural environments.

Att genomföra ett penetrationstest av en nätverksarkitektur är komplicerat, riskfyllt och omfattande. Denna rapport utforskar hur en konsult bäst genomför ett internt penetrationstest tidseffektivt, utan att utelämna viktiga delar. I ett internt penetrationstest får konsulten ofta ta del av systemdokumentation för att skaffa sig en bild av nätverksarkitekturen, på så sätt elimineras den tid det tar att kartlägga hela nätverket manuellt. Detta medför även att eventuella anomalier i systemdokumentationen kan identifieras. Kommunikation med driftansvariga under testets gång minskar risken för missförstånd och systemkrascher.

Ever since ABB has begun diecasting their rotors instead of permanent mold casting it,variation in the quality of the cast has arisen. Diecasting is performed in three differentmachines, M1, M2, M3 with 400, 660 respectively 800 tons of die locking pressures.The aim of this thesis is to answer the following questions:What is the ?right? cast quality? How is the right quality achieved?For sizes 160-180 solutions will be proposed that consider eccentricity between thelaminate and the short circuit ring as well as elimination of the thin Al film that appearson the outer periphery of the rotors.Through considering the statistic material the most often diverging rotor type has beenidentified and one of the actual rotors has been sent to a laboratory to be analyzed inorder to establish the current defects. The result of the analysis shows that there areplenty of gas- and oxide-porosity.It has been proved that every time the dies temperature decreased below 120°C thecontent of gas porosity increased. It is due to rapid solidification of metal that flowsthrough the ?cold? laminate.It has confirmed that enhanced porosity in squirrel cage causes high impedance in therotors.

The implementation of a material requirements planning system is a complex and demanding task. There has been much research into what factors are important in such implementations, but seemingly very little about the links between critical success factors and management control systems. This thesis attempts, through a case study, to answer the question of how management control systems affect the implementation of an MRP system in ASSA AB, a Swedish manufacturing firm. Data is primarily collected through interviews. Theory regarding implementation success definitions, critical success factors as well as management control systems is presented.

The aim of this masters thesis is to, from a queertheoretical point of view, examine the possibilities to classify the subject homosexuality in three different classification systems. The three systems that have been analysed is the Swedish classification system SAB, the Universal Decimal Classification UDC and Dewey Decimal Classification DDC. The analysed editions are updates from the beginning of the 1970´s until today. The emphasis has been on how well the systems correspond to the changing society. We found several differences between the three systems, but also some resemblances.