For systems with multicore processors contention for shared resources is a problem that occurs when several memory-intensive processes are executed in parallel within the same memory domain. This contention has a direct influence on the performance of the system and is a complex problem that has been recognized for a long time. An attractive and actively studied way to minimize this problem is by using a process scheduler adapted to allocate processor cores in a way such that contention for shared resources is minimized.With the introduction of multicore NUMA-systems (Non-Uniform Memory Access) the situation has become even more complex. In these systems the access time for processor cores to different memory domains vary depending on factors such as distance and load. Thus, the process scheduler also has to consider where the memory of each process is placed to minimize the distance and balance the load on each memory domain.This report presents a user-level process scheduler for a NUMA-system based on the multicore processor Tilera TILEPro64.

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.

Syfte: Syftet med denna uppsats är att undersöka hur svenska börsnoterade företag redogör för sitt sociala ansvar i årsredovisningar.Metod: Denna uppsats utgår från en kvalitativ metod. Vi har valt att göra en innehållsanalys för att strukturera det material som företag ger oss angående deras sociala ansvar. Teori: Den teoretiska referensramen har sin utgångspunkt i legitimitetsteorin. Därefter använder vi oss av intressentteorin för att kunna förklara vem företaget ska vara socialt ansvarsfulla emot. Teorier kring corporate social responsibility används för att förklara hur företag kan vara socialt ansvarsfulla.

To render outdoor scenes with lots of vegetation in real time is a big challenge. This problem has important applications in the areas of visualization and simulation. Some progress has been made the last years, but a previously unsolved difficulty has been to combine high rendering quality with abundant variation in scenes. I present a method to mathematically generate and render vegetation in real time, with implementation in the scene graph Gizmo3D. The most important quality of the method is its ability to render scenes with many unique specimens with very low aliasing.

The aim of this report is to give a description of a diploma work of 20 points that has been performed during the spring 2006 at Ericsson AB in Borås. The report accounts for the problem and procedure during the diploma work. The software used for this project was embedded in a radio link. The RAM in this radio link was divided into several regions where two were used for memory allocation. The current allocation of memory in the radio link was not optimized with regards to performance, security and memory use and the configuration used made it difficult to determine the memory use of the system and the actual memory need.

The aim of this paper is to critically examine and analyze how the informal performance about masculinities and femininity are being expressed and produced by the text and pictures in Huddinge kommuns internal magazine for the staff working within the public administration. The concrete questions are:By which patterns constructs the performance of gender in Huddinge kommuns internal magazine for the staff working within the public administration?Are the femininity and masculinities being expressed in a static way or have it changed in Huddinge kommuns internal magazine for the staff working within the public administration throw the examined years 1985, 1995 and 2006?A quantitative and qualitative method is used. The point of departure is organization theory in a gender perspective. With the gender organization theory we examine the structures, leadership, symbolics and changes through the examined years.

Thesis in Musicology and Artistic Practice by Anders Soldh. Part of the work for the master?s degree. Studies from School of Music, Theatre and Art, University of O?rebro, 2007.

This report is a hermeneutic analytical study of a practical pedagogical situation. For three occasions I observed my own practice as a dance teacher and how a moment, choreographic approach in the governing documents for upper secondary school GY11 was executed in a group of dance students. The part is formulated in the course objectives for the courses on the arts program under the topic Dansgestaltning with focus on choreographic approach. The study is based on a socio-cultural thinking but also takes into account the prevailing gender theories and focuses on how the process of formulation level, through the transformation level is portrayed in the realization level of the dance regarding choreographic approach. The study illustrates educational research from both a dance perspective and a school development perspective.

The purpose of this master thesis is to implement and validate a Power System Stabilizer (PSS) to a generator at Trängslet hydropower station in Dalarna, Sweden. Problems with local rotor oscillations can occur at the hydropower station when power is transferred on a new power line (130 kV) from Northern to Southern part of Dalarna. To ensure good operation properties on this power line Fortum Generation AB and Fortum Distribution AB wants to activate a PSS on a generator.There have been investigations in which situations and what equipment that contributes to rotor oscillations. When this is known the PSS is tuned to damp these oscillations by choosing a good set of parameters. The most important parameters for good performance are to choose amount of gain and phase compensation.

The interest in tiny wireless applications raises the demand for an integrated reference oscillator with the same performance as the macroscopic quartz crystal reference oscillators. The main challenge of the thesis is to prove that it is possible to build a MEMS based oscillator that approaches the accuracy level of existing quartz crystal oscillators. The MEMS resonator samples which Philips provides are measured and an equivalent electrical model is designed for them. This model is used in the simulations of the Pierce oscillator and the transresistance amplifier oscillator that are evaluated in this thesis. Finally the Pierce oscillator is implemented in the A BCD2 process and manufactured at Philips Semiconductors in Nijmegen, The Netherlands.

Tractors of today come equipped with a CAN-system. A CAN-system sends information from sensors to electronic control units who process the signals. The sensors measure several interesting parameters such as force, pressure and speed for various components of the tractor. This thesis discuss a force sensor which is placed in the pivot of the tractors three point linkage, the sensor measure the horizontal reaction force from the load that the tractor is exposed to. Signals from this sensor can be used to measure the force from any implement that the tractor is exposed to during an operation.

Objectivity is often emphasized as one of the fundamental principles for the auditing profession and is also a requirement for preserving satisfactory professional practice. The multiple company scandals in the first decade of the 21st century have created distrust for auditors? capability to maintain objectivity. The purpose of this study is to contribute with a new way of thinking when it comes to the factors that affect objectivity. Earlier studies have indicated that personality factors may affect work performance in many different fields and this study is exploring the connection between separate personality factors, and the capability of less experienced auditors to maintain objectivity in the relationship with dominating and demanding clients.Data was collected through a survey that was divided into two separate parts where the first part measured the participant?s score on different personality factors, and the other part measured the participant?s score on perceived objectivity.

The purpose of this study is to investigate the Swedish Public Relations and Communication profession from the Stockholm Accords point of view. The Stockholm Accords are an attempt to reflect Public Relations and Communication Management practice as it stands today and to provide a global common ground for the practitioners.The method used for this study is a quantitative research method conducted by a web survey answered by more than 400 Swedish communication managers. The questions posed were examining these managers view of their profession compared to the Stockholm Accords.The research shows that the Swedish way of implementing communication in the organization broadly corresponds to the Stockholm Accords when it comes to internal and external communication. However, there are some areas where Swedish communication practice diverges from Stockholm Accords. The issues which link governance, management and sustainability to communication have a much wider distribution of responses.

This bachelor thesis examines the relation between countries? degree of economic freedom and their economic performance. Economic freedom as a concept is defined as the degree of market economy within a nation.The variable of measure that is used is the Frasier institute Economic freedom of the world index (EFI). The paper is built upon the Solow growth model and is extended by incorporation of additional variables; among which of course economic freedom. The study is performed through regression analysis, based on the neoclassical model both on rich countries, poor countries and on all investigated countries.Two investigations are performed: i) the impact from economic freedom on countries level of GDP per capita and ii) the impact from economic freedom on the growth rate in GDP per capita.The finding is that economic freedom can be seen as a relevant determinant of differences in GDP per capita growth rates between nations.

One of the biggest changes which have affected businesses during the last ten years is the accelerating speed at which Internet technology and e-commerce has developed. If Internet earlier was used in the purpose to entertain it is now accepted as an essential business tool and companies are investing more of its resources in e-commerce activities. Everyone ?has to be on the net? today but that implies a challenge in matching e-solutions to the company?s business goals. It is necessary to have clear goals, carry out research and plan a strategy in order to operate an optimal e-commerce website for the company?s needs.The purpose with this dissertation was to see how well companies adjust to new demands in the rapidly changing e-environment.