Marine heatwaves (MHW) have become increasingly common in recent decades due to greenhouse gas emissions that have caused climate change. A marine heatwave is when the sea surface temperature rises, which damage many different ecosystems in the sea. One ecosystem that is sensitive to temperature changes is tropical coral reefs, which are at risk of bleaching during marine heatwaves. Coral bleaching is when its symbionts leave the coral and they lose their color, while also starving to death as they lose their food source. The purpose of this report was therefore to investigate what the connection between marine heatwaves and coral bleaching looks like, and to see if there are any geographical differences.

More often consumers demand instant dry soup that can be prepared with a water temperature below 100o C, which is currently not possible, because the dry soup becomes too thin when using water with a lower temperature. In this study, various kinds of starch studies were made to optimize the starch used in the existing product to make it more viscous at both high and low temperatures. The result was that one of the two starches present in the existing product was retained by change in quantity as it contributed to important flavor parameters. The second was removed and replaced with a starch that made the product more viscous at lower temperatures. To find out if the new product differed from the existing product a viscosity measurement and a sensory paired preference test were made.

This project was an assignment by Sveaskog and Svenska Skogsplantor. The purpose was to study the effect of protective fabric on the thawing stage of frozen pine seedlings. The function of the protective fabric is that it should protect the seedlings against strong sunlight and create an even temperature inside the boxes containing the seedlings. The result has shown that there was no statistically significant difference when the protective fabric was used or when it was not used, although this was probably due to the weather conditions. The study was carried out under cold and cloudy weather conditions and probably would have given other results if there had been more sunny days with a higher ambient temperature.

The report comprises two separate parts:part 1:  Temperature needs for district heating in the paint shop for axles in building 210part 2:  Energy and low temperature waste heat solutions in heating and cooling systems for   building 64 with surroundingsThe paint shop for axles in part 1 has air quality requirements in places for coating of axles. Toachieve desired air properties there are different process ventilation systems, which consist ofventilation coils for heating and cooling, plus air humidifier. The ventilations coils for heating usedistrict heating. Today the ventilation coils use water of 100°C to achieve necessary air demands inthe coating boxes. This part of the report investigates whether the existing system would achievethe air requirements with a water temperature of 75°C instead of 100°C in the ventilation coilsduring the coldest parts of the year.

The purpose of the thesis is to demonstrate how high frequency trading affects the stock market. The growing high frequency trading is affecting the game plan on the financial markets and concerns have grown about the high frequency users intentions with their business. It is difficult to receive an overall picture of the subject because the lack of previous research and even the research that exist do not show the entire picture. The thesis contributes to the research through a comprehensive picture of the present debate as well as the previous research through a literature study. Our results showed that high frequency trading provides liquidity to the market, there is a statistical connection between high frequency trading and volatility, no price manipulation is being used and there is a need for a supervision of the high frequency trading..

The Swedish consumer electronic industry has recently experienced an increasingly intensive price war. The price war has forced some operators in the business to declare bankruptcy, as the only way to compete has been by driving down prices. A challenge that retail chains in the consumer electronics industry is facing is to increase their margins. If store personnel can success with upselling, the companies will increase their profits. The purpose of this paper is to examine if the sales people in the consumer electronic industry can influence the customer to buy a more expensive product and what the effects the upselling has on the customers' attitudes.

Outdoor housing of horses? best fulfils the horses? need for physical activity and it is an alternative to the more cost and energy demanding indoor housing in stables. Furthermore, if outdoor housed horses have access to shelter they can generally cope well with adverse weather conditions such as high or low ambient temperature, heavy rain or strong winds. In this study, the daytime shelter-seeking behaviour of three groups of horses housed outdoors was studied during the summer. The aim was to evaluate whether shelter use is related to weather variables (e.g., ambient temperature and wind speed) and insect harassment. The shelter-seeking behaviour was studied for three different groups of horses: Group 1) eight individually housed horses in paddocks that had access to three different shelter types (C: closed on three sides with roof, R: open on three sides with roof, W: closed on three sides without roof), Group 2) 25 group housed mares with foals on pasture with access to shelters C, and Group 3) ten mares without foals on pasture without access to shelter. Each group was studied for eight days.

The aim with this work has been to examine the climate changes and what these has meant, and will mean during the present century, for plants that have not been hardy in Sweden. A lot of new species can probably be grown today in Sweden's most southern parts, due to an increase in the average annual temperature by 1?C. There is a need of information about these new species and their hardiness. The insufficient information about the subject has been the background to this work.

This is a report written for an examination project C-level, on the subject of energy. The examination project is a product of the FVB Sweden AB (district heating bureau). It started with a meeting with Stefan Jonsson FVB Sweden AB, were he explained the content of the project, and from this a presentation of the problem was made. The problem that needed to be solved was how they could control the valves in the system to provide heating to everyone in the system. The valves are often oversized so the pump in the heating plant would have to be enormous to be able to provide enough flow to be sufficient, if everyone in the system had there valves fully opened. I came up with two solutions to the problem, one was a wireless network that could keep track of the valves and the other solution was an extra sensor that was placed on the radiator.

Transmission of digital signals is today more frequently used than transmission of analog signals. One reason for this is that a digital signal is less sensitive to noise than an analog, another reason is that almost all signals today are handled in a digital format. This thesis describes the development of a system that receives digital video signals through FireWire. The standard for FireWire, which is a high performance serial bus, is under development. Today the standard of the bus supports transmission of data with a speed of up to 400 Mbit/s.

The jetengines of today are growing in complexity. Reliability for aircraft engines are of extreme importance, mainly due to safety reasons but also economical ones. This master thesis deals with faultdiagnosis in the turbine section of RM12, the engine used in Saab/BAe's Gripen. Three different faults which can occur in the turbine section was studied. These faults are: clogged fuel nozzle, hole in outlet guide vane and sensor fault.

This thesis examines different methods for the cooling of data centers. Several means of cooling with the refrigeration cycle have been studied, as well as the feasibility of using free cooling in different parts of Sweden. In addition, the possibilities of transferring excess heat to a nearby district heating system were investigated. It was found that in all investigated cases except two, the data center could be cooled solely with free cooling for at least 300 days a year when only the outside air temperature was considered as a constraining factor. The limit was then set to 20 °C.The vast majority of all district heating systems in Sweden get little to none of their heat from other excess heat sources.

Today there is no way of measuring or simulating turbulent flow in high Reynolds numberenvironments. The computational power required to simulate these conditions is not expectedto be available for several decades so instead the CICLoPE project aims at solving thisshortage by the construction of a long carbon fiber wind tunnel in which real measurementscan be made. To do accurate measurements it is of importance that the wind tunnel, 0.9 metersin diameter and 110 meters long, is as straight as possible.This master thesis treat the design and construction of a device which may be used to align thetunnel along a reference laser beam. A design is presented which allows the pipe to be alignedwithin about a quarter of a millimeter along its entire length. Contents span over severalscience fields such as physics, mechanics, control theory and electronics.The result is a theoretically correct design.

With climate change, the temperature and relative humidity in Sweden are increasing. The majority of historical environments lack protection against this increase, which also increases the risk of mold infestation in these environments. One of these environments is N??s Slott, in which several rooms have recurring mold growth on objects and furniture. By examining one of the rooms in the castle that is in the risk zone or has mold growth, factors behind the mold growth can be investigated in order to create a basis for future actions against mold.

The last few decades the development in the field of electronics has been huge. The components performance gets better at the same time as the manufacturing cost decreases. Many of the design moments that have to be done, are done automatically today, but it can get better. Especially for analog circuit design.At Electronic System in Linköpings universitet, research is in progress to develop a tool that can design analog circuits in reasonable time. It means that it has to size the components (transistors, resistances, capacitances etc), so that the circuit can fulfill the performance requirements.