The aim of this thesis was to examine if it is possible to keep nitrogen in the form of nitrate(NO3-) in ponds from one season to another by keeping a high concentration of oxygen in thepond water. This hypothesis was tested by doing a lab experiment where two systems werecompared according to nitrate concentration. One system had high concentration of oxygen inthe water and one had low concentration of oxygen. Before the main experiment wasconducted I did a pilot study to test the system setup and included parameters. The result fromthis study and the main study did not show the same result.

This report was written by Sofia Ericson and describes the degree thesis with the title: ?Connections between the growing site of bio fuel, the chemical composition of bio fuel ash and the deposit growth in a bio fuel fired boiler.? The purpose of this degree thesis was to avoid melted deposit growth in the bio fuel fired boiler at ENA Kraft in Enköping. Potassium and sodium are known to lower the melting point of bio fuel ashes and are therefore not wanted in the trees in higher amounts than necessary for the growth. Silicon is also known to be important for the deposit growth but it is not possible to say in general if higher or lower contents of silicon is better. The relation between silicon and other chemical substances is more important than the total amount of silicon.

Approximately 400 people in Sweden die each year by lung cancer caused by radon gas. Authorities have in recent years invested big resources and organized campaigns to encourage people to take action against high occurrence of radon in residences. With low frequency of applications for radon allowances as the main measure, a lot interprets on a very low commitment. The purpose of this thesis is to investigate the reasons for the low commitment among people. The study is based on a questionnaire survey sent to 444 house owners in Uppsala.

Ett digitalt vågfilter av Richardstyp har implementerats i en FPGA på ett utvecklingskort. Sampel kan skickas till filtret och mottas från filtret via serieporten på en dator. Metoden som användes är att en modell av filtret konstruerades i Simulink. Filtret har modifierats med avseende på skalning, brus och stabilitet. VHDL-koden till filtret genererades i Simulink genom att bygga modellen av Xilinx Blockset.

Today?s forest managers implement a large number of methods to increase the amount of dead wood in Swedish forests. They use everything from high cutting of trees to girdling trees and burning forests. However, implementation of these measures without proper knowledge of their consequences is a common problem. This study has been performed to increase knowledge about two of these measures, girdling and high cutting, and how these actions affect the number of wood-living insects living on dead trees.

In December 2008 the municipal council in Nybro, decided that the municipality shouldreduce the budget for food service. The budget should be reduced by 2 100 000 SEK.They decided that the children- and education committee, and the care committee would haveto lower their budget with 1 264 000 SEK respectively 636 000 SEK. The change have to bedone under two years, 60 % should be done under 2009 and 40 % under 2010.As a result of the decision, many kitchens have to become kitchens that only serve food, notcook it. This will result in preschool staff and nursing staff take over some of the tasks fromthe kitchen staff. The municipal council also decided that entrepreneurs could take over one(later two) cooking areas.A kitchen that serves food means that there isn?t any cooking involved.

A totally mixed ration (TMR) is a mixture of all the necessary feed components for the cow. She will eat the exact same feed in every bite which will make the rumen pH more stable and always supply her with a constant proportion between roughage and concentrate. This will make it possible for the cow to eat more dry matter (DM) a day because the fibre requirements are fulfilled. If a part of the concentrate is given separated from the mixture it is called partly mixed rations (PMR) and is almost always used when using an automatic milking system (AMS). When using TMR and PMR it is important to have a high hygiene, be accurate when mixing the feed and to look after cows in a good and strict way. The aim of this study was to document different farms with PMR in an AMS to see which routines they have and how they are managing their production.

The aim of this study was to describe and analyze the problems caused by students that characterize themselves as highly sensitive. The issue of high sensitivity and other categorizations are fiercely debated in the research. This empirical study was conducted in light of literature about high sensitivity, pedagogies, and interview methods. The students answered questions about what makes them categorize themselves and how they believe that the categorization affects their learning and social development. They also responded to questions about what they consider appropriate measures to improve their situation.

Natural monuments are natural objects with special protection due to their high natural value or cultural significance. The natural value is determined by the occurrence of signal species found on and near the natural monument. The law surrounding natural monuments has evolved a lot since the first ones were declared, and today the title natural monument can be replaced with the title tree with high conservation value. The title has come later and can sometimes overlap natural monument. Some natural monuments lack the qualities required to be classified as a natural monument or a tree with high conservation value, but have a cultural importance.

This bachelor thesis aims to explore the public?s personal connection and attachment to place, as well as their perception of changes in the built environment that has occurred in close proximity to the area. Based upon a questionnaire carried out in a public square in Gothenburg, namely J?rntorget, the study examines the impact of the construction of two high-rise buildings that was initiated roughly five years ago adjacent to the square. The essays theoretical framework is based on the concept sense of place, a concept which derives from the discipline of Geography. Sense of place encompasses the relationship between people and spatial settings, which includes e.g.

Examensarbetet har gått ut på att uppgradera ett styrsystem och en operatörspanel för en centrifug i en kemisk industri. Projektets syfte är att centrifugen ska köras på ett mer automatiskt sätt med ett nyare system som har större tillgång till reservdelar.          Centrifugens äldre styrsystem från Siemens har bytts ut mot ett nytt Siemenssystem och den tidigare operatörspanelen från Siemens har bytts ut mot Beijer Electronic E1070 operatörspanel. Styrsystemet programmerades sedan i Siemens Simatic Step7 och operatörspanelen programmerades i Beijer Electronics E-designer.                Efter att programmeringen var klar testades kommunikationen mellan styrsystemet och operatörspanelen innan inkopplingen av det övriga systemet skedde.

The purpose of this paper is to examine the effect that price has on quality expectations and customer satisfaction and how price fits into a customer satisfaction model. An experiment in which participants are subject to scenarios of a high or low quality flight are used to test the hypotheses. The analysis shows that perceived quality has a bigger impact on satisfaction than price. Furthermore, price and quality do not affect customer satisfaction independently of each other. The importance of value compared to quality changes whether the actor is a high or low price actor.

In Sweden there are 1894 small-scale hydropower plants in operation, which together generate 4.3 TWh of electricity per year according to Swedish hydropower compound (SVKF, 2011). This corresponds to the annual consumption of about 860,000 Swedish households (based on an annual consumption of 5000 kWh). In the mid-1950s there were around 4000 small-scale hydropower plants in operation in Sweden before cheap fossil fuels and uranium competed with them, in the current situation only 1,894 of these are in use. If slumbering small hydropower plants once again would be taken into use and some new ones are built, we would be able to extract about 7 TWh of renewable electricity from these annually in Sweden, representing about 1.4 million households.The thesis intends to calculate and construct a hydroelectric power plant at the existing dam in Olofsfors and give suggestions on how the power station should run during the time that fish migration is greatest in Leduån.The turbine and generator to the station in Leduån at Olofsfors is designed by the height of the fall and the water flow through the dam. The turbine selected for the station is a CK-1000RM turbine with a 4-pole 250 kW generator from Cargo & power turbine Sweden AB, which is expected to deliver 1.2 GWh per year.

This thesis is a part of the project "Sustainable harvesting and storage of sugar beets, more sugar to practice". The work has included a large part of practical experimental work with weight measurement, graduation and storage planning. The aim of the project is to be able to see whether the cultivars react differently in different storage conditions. The project has included storage under controlled conditions to give as accurate results as possible. To be able to mimic the farmers own preconditions the samples was harvested with a conventional Holmer.This project has two parts, one concerning the nature, time and temperature on storage where a number of different cultivars where investigated during three different recording times, two different temperatures and controlled in a controlled environment.

This Master Thesis documents the development of an On Board Diagnosis (OBD-II) interface for remote diagnosis of vehicles. The Master Thesis is part of a project at the company Wayfinder Systems in Lund. The purpose of this thesis was to design a scantool that communicates with a vehicle through its OBD-II port using relevant standards. In order to make the OBD-II interface development easier, a car simulator was first built. Both the car simulator and the OBD-II interface were implemented using a linux computer running a C-program with serial communication with an external electrical interface.