VSEM project and the need for a more efficient way of handling requirements andinformation are highly apparent.The overall objective of this thesis is divided into two parts:1. To identify criteria/factors leading to a successful introduction of an informationmanagement system.2. To develop an implementation process for a requirement management system ?the first step towards a PLM system in EE development at VCC.This will be done through interviews with employees, a literature review and an analysisof studies of three earlier projects within VCC.The conclusion of this study shows the great need for change in work methods fordesigners handling information and requirements. An implementation process has beenidentified with guidelines on how to handle different phases of the process.

This report is about helping Q-Med AB in Uppsala to start its implementation of uncertainty of measurements analyses in their manufacturing department. Prior to this, the company relied solely on personal experience or did not take this uncertainty into consideration at all during different kind of measurements, which means that some of the processes that the company previously believed were within specified acceptance limits, will actually fail when considering these sources of uncertainties.Q-Med AB needed some sort of instruction to help the company, in a systematic way, to investigate different types of disorders that are affecting all kinds of measurements. This instruction includes a short summary about measurements and uncertainty of measurements in general and a detailed procedure about how these uncertainties are going to be handled in their daily work.The goal was to be able to use this instruction to systematically locate, eliminate (when possible) and analyze all kinds of disorders when measuring. Q-Med is using a lot of different types of instruments when measuring different types of quantities, including temperature, mass, pressure and density. This instruction will hereafter be used for every instrument, regardless of quantity and type of instrument.The instruction is tested through 4 different kinds of measurements, for mass, temperature and humidity.

The purpose of this report was to investigate how the abiotic factors (temperature, pH, nutrients, oxygen levels and water content) would affect the decomposition of oil-contaminated soil and how a variance in structured soil would affect the decomposition-rate. A minor field-study was made and soil where structured in five different ways (one was a default pile and was used as a reference). The study took place over 137 days and three samples were taken (start, middle, end) and analyzed for aromatic and aliphatic compounds. The result of this study shows that there is a significant difference between all methods for the aliphatic compounds and no significant difference for the aromatic compounds. The abiotic factors that affect decomposition vary from organism to organism, depending on what type of environment it will function the best.

For centuries, springs have played a significant role in our society as water supplies, reasons for where to settle down, and in folklore. There are different reasons why and where a spring forms, e.g. in what kind of soil it has its outflow. Geographic and geochemical surroundings have an influence on spring-water quality.For this project some of the springs in the Lagga perish, Knivsta municipality, Sweden, were selected for a closer study. Water samples were collected from springs for analysis.

Twitching is frequently used in horse management because of its sedating and pain-relieving effects. In this study, the effects on the horse?s nervous system by twitching were investigated by thermography of the skin temperature. The temperature is regulated by the sympathetic nervous system through postganglionic sfincters at the capillaries of the skin. The effects on the endocrine activity have also been studied by the measuring of ACTH and cortisol in blood plasma.

The focus of this project has been on the drainage tank of the reheater on Ringhals 1. This tank has on two previous occasions received such a high water level that the system automatically emergency stopped. For this reason, events and various readings from these two occasions has been specifically studied and analyzed. In order to prove theories about what causes these problems a model of the system was created in the program Dymola. Using simulation results from the model, we have been able to demonstrate how the system's measured values should look likeunder normal conditions with respect to flows, pressures, temperatures, valve positions and water level in the drainage tank.

The purpose of this study was to investigate the effect of educational and vocational guidance, refer-only high school students tend to stay on their first selected program or to change the program. The theories used in the study deals with young people's choices and choosing education and vocational and life role as a student. The method was quantitative, descriptive survey. High school students in grades three, from two high schools, were asked to answer a questionnaire about perceived educational and vocational guidance. Convenience sample consisted of 162 respondents (N = 162), 86 women and 76 men.

When implementing syncronous filters with global clock nets, a substantial amount of energy is consumed in the clock net. Hence, it is interesting to reduce the size of the clock net, which in turn will reduce the total energy consumption. One way to acheive this, is to create a SIC (Structured Interfacing of Computational elements) since such a structure can be created without a global clock net. Our results show that a fifth order wavedigital filter with a sample rate of at least 10M samples/sec may be achieved.

The building industry consumes approximately 40 % of the total energy consumption in Sweden, where the using stage is dominating with 80 %. There is a lot of work in progress to reduce energy use in the building industry, and the demands from authorities regarding energy use increases. As a part of this work Building and planning department of Sweden has established a requirement that has been applied since 2006, and restricts a maximum energy use for buildings.The requirement includes that an energy simulation must be done in advance to demonstrate that it is possible to meet the demands.Reality is however more complex than an energy simulation program, that frequently underestimates the energy use of buildings. The purpose of this thesisis to study and analyse deviations between estimated and actual energy use in modern apartment buildings. The study includes four apartment buildings in Stockholm, Gothenburg and Jönköping that were built in 2007-2009.

This report is about helping Q-Med AB in Uppsala to start its implementation of uncertainty of measurements analyses in their manufacturing department. Prior to this, the company relied solely on personal experience or did not take this uncertainty into consideration at all during different kind of measurements, which means that some of the processes that the company previously believed were within specified acceptance limits, will actually fail when considering these sources of uncertainties.Q-Med AB needed some sort of instruction to help the company, in a systematic way, to investigate different types of disorders that are affecting all kinds of measurements. This instruction includes a short summary about measurements and uncertainty of measurements in general and a detailed procedure about how these uncertainties are going to be handled in their daily work.The goal was to be able to use this instruction to systematically locate, eliminate (when possible) and analyze all kinds of disorders when measuring. Q-Med is using a lot of different types of instruments when measuring different types of quantities, including temperature, mass, pressure and density. This instruction will hereafter be used for every instrument, regardless of quantity and type of instrument.The instruction is tested through 4 different kinds of measurements, for mass, temperature and humidity.

This essay looks into the concept of self-efficacy and its implications for work performance. The participants in this study work for a call center company situated in the southern part of Sweden. The hypothesis is that a high degree of self-efficacy exerts a positive effect on work performance. Furthermore, the study seeks to identify the factors that give rise to work satisfaction among the participants. The results of the study show that there is a negative correlation between high self-efficacy and work performance.

An Internet application, VEDAIR, for estimation of air quality in regions with small-scale combustion of bio fuel has been developed by Swedish Meteorological and Hydrological Institute with financing from Swedish Energy Agency and Swedish Environmental Protection Agency. The model contains user interface and a coupled model concept where concentrations of atmospheric pollutions are calculated for regional, urban and local contributions. In this report the model is described and a first study of air quality considering PM10 (particles with a diameter less than 10 µm) in two Swedish municipalities, Vänersborg and Gnosjö, is introduced.According to the result, there are areas with poor air quality even in smaller Swedish municipalities, mostly due to high emission from buildings with older wood heating furnace without hydraulic accumulator.In Vänersborg three areas were analysed in VEDAIR for the year 2003: Vargön, Mariedal and the downtown district. In the whole municipality the upper evaluation threshold for PM10, which is defined as 14 µg/m3 for annual average, was exceeded due to background contribution of particles. In all areas, however, the concentrations of PM10 were less than the environmental quality norms.

The complex sound of someone walking in snow aren't easy to create in a studio. The best way to get the sound is to go out on a surface with real snow and record the footsteps there, but it is a complex procedure to get the right sound on the snow because snow sounds different in various temperature and various kinds of snow. It is important to find the right kind of snow to get the right sound on the foot steps. In a studio, the foley artist can create the sound of footsteps in snow by walking on different kind of material, like potato flour, coarse salt or corn flakes, the question is how realistic this materials sounds and what temperature on the snow they sound like. The results shows that the real snow (warm and cold snow) sounds most realistic and the potato flour sounds like warm and wet snow, the corn flakes some think sounds like cold snowwhile others think that it doesn't sound like snow at all and the coarse salt sounds like snow when it is around -10°C in the air, they all sounds similar in realism compared to each other.

The use of forage maize has increased over the last years. The aim of this litterateur review was to summarize a part of the research that has been conducted on forage maize for growing cattle, including cultivation and conservation of the maize. The forage maize is planted in April or the beginning of May when the temperature in the soil is between 6 and 10°C. Maize needs high temperatures and much water. Maize is harvested in the autumn when the dry matter (DM) is more then 30% or the plants have been exposed to the first frost in the autumn.

This study investigates three different methods for evaluating MOE,Modulus of Elasticity, in field measurements. The purpose is toinvestigate the possibility to use dynamic measurement methods infield measurements that hitherto (2010) has been performed with staticmethods. The objects of investigation are 20 glulam beams. The firstfield measurement took place in november 2007 and applied a staticmethod based on the standard SS-EN 408. The second measurement,described in this study, took place during summer 2010, and appliedstatic as well as dynamic methods.The MOE of wood is affected by a range different factors.