The main purpose with this study was to investigate whether the tree growth differs or not in prescribed burnt areas compared to mechanically scarified. Together with the result from the main purpose, answers of whether it's possible or not to combine nature conservation with tree production in prescribed burnt areas was presented. In these areas the regeneration were analyzed to see if there was enough tree plants to comply with the Swedish Forestry Act regulations terms for approved regeneration. A field survey was conducted at 6 objects, three objects for prescribed burning and three for mechanically scarification. All objects were planted within the same year.

Recent studies show that the knowledge in and understanding of science, technology andmathematics of Swedish junior high school and high school students is decreasing. As a resultof this the Swedish government has initialized several studies, research and reforms. One ofthe theories for teaching that today is seen as effective is the socio-cultural perspective and itsdescendants, including scientific inquiry. Using the pedagogy of the socio-cultural perspectivefour assignments regarding the human body was constructed for junior high school studentsattending summer research school in the summer of 2008, hosted by AstraZeneca. Theassignments follow a structure (goal of assignment, preparations, experiment and follow-up)inspired by the concept of NTA ? Naturvetenskap och Teknik för Alla (Science andTechnology for everyone).

The purpose of this study was to within a Swedish context and from five persons of foreign descent stories study how they have been affected by interpreting for their parents during their childhood and how this has affected the relationships within the family. Studies conducted in an American context have shown that children interpreting for their parents in everyday situations are prone to undertake roles similar of a family leader. Previous studies also show an increased danger of depression among children who interpreted for their parents. The study was conducted by the use of semi-structured interviews with five male respondents with a varying ethnic background. Using Antonovsky´s theoretical formulation ?sense of coherence? we were able to determine that although our respondents during their childhood were subjected to a large amount of stressful elements they also maintained a high sense of well-being.

The aim of this literature study was to analyze how milk urea concentration is working as a measure of the nitrogen supply to rumen microbes and indicator of the environmental load. Questions included in this literature study were how to improve the dairy cattle nitrogen efficiency and what correlations there are between milk urea, nitrogen efficiency and crude protein content in the feed. Effects on the reproduction from high ration protein content are also addressed. Dairy cattle are today fed with large proportions of protein which could lead to high expenditure of feed and environmental pollutions. The nitrogen can be lost to the environment by different pathways; leaching, denitrification or by emission to the air.

The aim of this literature study was to analyze how milk urea concentration is working as a measure of the nitrogen supply to rumen microbes and indicator of the environmental load. Questions included in this literature study were how to improve the dairy cattle nitrogen efficiency and what correlations there are between milk urea, nitrogen efficiency and crude protein content in the feed. Effects on the reproduction from high ration protein content are also addressed. Dairy cattle are today fed with large proportions of protein which could lead to high expenditure of feed and environmental pollutions. The nitrogen can be lost to the environment by different pathways; leaching, denitrification or by emission to the air.

During the 17th century the production and distribution of printed works increased in Stockholm and Uppsala. However, all works that the publisher wanted to print, did not reach the reader. This thesis aimed to show when, where and how printed books and dissertations did not reach the reader. To achieve this aim, aspects of several well known models showing systems of book production and distribution were combined and adapted to suit Swedish conditions in the 17th century. This combined model focused on processes of selection and was presented and used as a theoretical approach.

This paper?s objective is to investigate whether Modigliani and Miller (MM) I & II proposition from 1958 with regard to capital structure, is still valid among public Swedish firms.We have chosen the 63 firms on the Stockholm Stock Exchange (OMX) that Affärsvärlden magazine?s general index (AFGX) has categorized as industrial firms. We based this selection on the assumption that these firms are relatively capital intense and have a clear focus on production and, therefore, mainly uses capital structure as a mean to finance their production and not as a means in itself.To be able to fully evaluate these firms we have calculated the current key ratios based each firm?s annual report. To make the figures comparable across the entire population we adjusted them to each firm?s turnover.The results we have reached concur with MM?s proposition I regarding capital structures independence of the firm value.

A one-cylinder research engine has been used for studies with a Diesel Dual Fuel concept (DDF). DDF is a concept that utilizes a pilot diesel injection to ignite a homogenous natural gas/air mixture. Emissions and engine efficiency have been analyzed in an emission cycle called European Stationary Cycle (ESC) and the knock/pre-ignition problems with this type of engine have been investigated.At low and mid torque levels, an early diesel injection around 60 crank angles degrees (CAD) before top dead center (TDC) was used. At these loads raw NOxemissions was below EURO 6 level (0.2 g/kWh). NOxwas at EURO 5 level over the complete ESC without after treatment and with SCR at high loads it should be possible to reach EURO 6.One issue with DDF is the high HC emission levels.

The aim of this study was to investigate how the process of implementing a quality management system for food safety was handled in four different food producing companies in Sweden. The aim was also to analyze what difficulties the companies face and the possibilities that arise when certified. Furthermore, the reason for implementation was discussed as well as the main expectations on the certificate. Implementing a quality management system is a good way of ensuring the quality and hygiene of the food production and it also increases the traceability of food products through the whole food chain. A food safety standard provides a method of preventing problems and crisis and it can also help to handle requirements from authorities, the market and others.

Successful broiler production in hot climates requires knowledge of how birds are affected by heat stress. It is important with access to water and good ventilation to facilitate coping with the heat. It may be useful to reduce the consumption of feed during the hottest hours of the days, which together with a few hours of extra light available could improve both productivity and animal welfare. The vision in birds is superior to that of humans and most other mammals. Continuous light and light with low intensity can cause eye injuries, affect the eye development in young chicken negatively, as well as provide increased incidence of foot pad lesions. Access to light affects the production but also the welfare of birds.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

My bachelor?s dissertation concerns the creation of a proposal for interior decoration of the Boland High School?s canteen. I have been in contact with personnel, students and the school principal through the duration of the project. In the end, substantive changes of lighting, interior decoration and movement were proposed for the canteen. In the proposal I have focused on accentuating the school?s profile, on creating smaller spatial configurations within the larger configuration of the room, lowering the noise level, creating a good movement flow, increase the number of seats and creating a pleasant environment in which to eat..

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.