Sök:

Sökresultat:

6514 Uppsatser om High production - Sida 49 av 435

Att arbeta med ständig osäkerhet : En studie av High Reliability Organization

There are certain organizations that manage to handle risk in such a successful way that they almost stay error-free, in spite of the fact that they daily face the risks of accidents. These organizations are usually given the name High Reliability Organizations (HRO). While the most common example is that of a nuclear plant the variety of what organizations can fit into the category is extensive.The purpose of this study is to describe safety culture and theories about HRO and how these can be found in practise within an organization.This qualitative research uses influences of ethnography in its method. The ethnographical approach was picked due to the field of the study and the cultural context in which it is set.The results of the study identify a number of elements sorted into four themes. These themes are deemed compatible or non-compatible with relevant existing theories.

Äggstockscysta hos mjölkkor

The presence of cystic ovarian follicles represents an important ovarian dysfunction and is a major cause of reproductive failure in dairy cattle. A cystic ovarian follicle is a persistent follicular-like structure on one or both of the ovaries. It is at least 2,5cm in diameter and it has to persist for at least ten days while a corpus luteum is missing. There are two kinds of cystic ovarian follicles, those who have a progesterone production and those who have not. A clear definition for this condition is lacking, probably because the heterogeneity of the clinical signs and the complexity of the disorder.

GIS-program för ruttplanering. En studie av nyttjandet av GIS-program för ruttplanering inom tekniska förvaltningar bland kommunder i västra Sverige

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

Inkongruenta styrmodeller: En fallstudie av reparation och underhåll i ett industriföretag

In theory, the management control of maintenance functions is described as problematic due to the nature of the work performed in the unit. The purpose of this thesis is to examine these predicted problems in practice. Further,the thesis aims at identifying how these control problems may affect the relationships between the maintenance department and its internal customers. A case study has been conducted in one of Sweden?s largest industrial companies to investigate the said control problems in practice.

The allotment plot : osäkrande som designstrategi

During the spring semester of 2009 I have participated in what was to become the project The Allotment Plot; a collaboration between the Swedish University of Agriculture and the Wanås Foundation. As one of six students in landscape architecture I have experienced a group based learning process with the point of departure in the designing of an organic and experimental kitchen garden at Wanås, a sculpture park for contemporary art. The project came out as neither us nor any other of the people engaged could have guessed. What was meant to be a garden turned out to become an entire cultivation movement. As students, we have gained a lot of experience through praxis; experience that will be valuable for our future profession. The project has also opened up the possibility to question and reflect upon what our profession and education could or should be about. This thesis focuses on the role of communication and the production of communicative tools in design processes and landscape architectural practice. It discusses how communication may be used in an exploratory and ?un-securing? way, and how this may dislocate the professional role, especially in situations where the design action, as in the case of this study, demands a high degree of transdisciplinarity and collaboration. .

Metod för urval av bäriga bestånd längs med bäriga vägar i Sveaskogs planeringsområde Råneå och Överkalix :

With increased need for flexibility in timber deliveries, forest roads become an important factor. The disintegration of roads during the spring season can be avoided if it is possible to rule cutting areas to stands with good carrying capacity along roads with good carrying capacity. The goal with this work was to create a method to find the stands with high carrying capacity located near roads with high carrying capacity, and select them into a collection file. The method was based on Esri ArcGIS 9 and the tables that follow within that program. The method resulted in four different themes: 1. Collections with GYL 100 that cross the bufferzon for 0, 1, 2 and 3 class roads. Result 36 collections. 2. Collections with GYL 100 and 200 that cross the bufferzon for 0, 1, 2 and 3 class roads.

Mozzarella : En djupdykning i ostmassan

Worldwide consumption of cheese has increased over the years. The average Swede consumes somewhere around 20 kilograms of cheese per year, which is an increase of a 100 % over the past 50 years. One of the most popular kinds of cheese during the past decades is mozzarella, due to its? use as pizza cheese. Flavor and consistency differ between the traditional kind, made out of buffalo?s milk, and the industrially made kind, made out of cow?s milk.

Jämförelse av solhybrider

Research in solar energy is taking big steps in both solar heating and solar electricity. It´s not only the technologies alone, but also the combination of both solar electricity and solar heating which is what is called a solar hybrid. The idea of a solar hybrid is that a solar cells efficiency decrease with increased temperature and can with help from a solar collector be cooled and the heat can be utilized. This thesis report compares heat production and electricity production with respect of, in first hand, a solar hybrids geometry in the cooler. The theory chapter describes solar heating and how different solar cell technologies work and their environmental impact at the production and how compatible these technologies are for the solar hybrid.

Conqueror för Indigo

Conqueror for Indigo is production treated with an active chemical to maximize the ink adhesion.ArjoWiggins has found that another chemical, the candidate compound, would improve the propertiesof the paper. ArjoWiggins therefore wish to replace the current compound. To strengthenthe patent requirements for ink adhesion needs to be determined. A theory is developed to whychemicals with certain properties maximize the ink adhesion. Experiments are performed but theresults are inaccurate.

Capacity studies on DeLavals sort gate DSG10

In the dairy production it is necessary to be able to sort cows. Dairy cows are sorted for many different reasons i.e. regrouping into production strings or for treatments i.e. inseminations, pregnancy and health checks, vaccinations or hoof trimmings. One labour saving way of conducting sorting is by using an automatic sort gate.

Lean på Menyn - En fallstudie av en rörlig personalstyrkas påverkan på en implementering av lean i restaurangbranschen

Today, the management concept of lean has stretched far from its origins in the Japanese automobile industry. When reaching the Swedish restaurant industry, the conditions for a successful implementation of lean change as a result of the high employee turnover and the significant amount of part-time employees characteristic for the industry. Combined with a high-end service profile, these workforce characteristics seem inconsistent with some of the basic principles of lean. By conducting a case study, this thesis aims to investigate the effects of a variable workforce on the enablers for a successful implementation of lean in a high-end service industry. Using a theoretical framework consisting of enablers for an implementation of lean in services, the study finds that the variable workforce inhibits an implementation of lean by complicating the effects of traditional training, as well as the possibility of understanding the lean concept at all levels of the organization.

Framtidens gymnasieskola - En styrning utifrån ett modernistiskt eller senmodernistiskt perspektiv?

This empirical work and base has been to analyze the new high school reform that the Swedish government introduced as a statement 2008/09:199 about: Higher demand and quality within the high school. This statement became legal through the government vote in spring 2010. But above all it is the investigation (SOU 2008:27) that is the central piece for these new examination changes for high school students that will come into effect 1 of July 2011. The purpose and questions asked in this analyze has been if the reform takes its base in a modernistic (traditional) way or a late modern scientific perspective. And also to find out how these new quality amendments in the investigation makes visible about the high school and what the purpose are about the changes. When scientific theories in these analyze is placed against the reform, the result shows that the modernization process reflects more of a late modern aspect, which constantly reappraise in a changeable society.

Ekologisk och småskalig uppfödning av slaktkyckling och kalkon i Sverige :

In Sweden in January 2005, there is only one producer of organic broilers and none of organic turkeys. But there are, on the other hand, a few small-scale producers whose housing systems to some extent are similar to what is stipulated in the organic standards. The aims of this work are to investigate what housing systems are used by the Swedish small-scale producers of broilers and turkeys, what main challenges they are confronted with and if there is an interest and a possibility for a change-over to organic production. For the first part of this work a literature study was performed with the purpose of detecting the main health problems in conventional as well as smallscale production. A special focus was on coccidiosis and leg weakness as those were considered to be of particular importance. A study was made of Swedish small-scale poultry production units. In two groups of broilers from the same producer and in three flocks of turkeys the level of Eimeria oocysts in faeces and litter was investigated.

Methane emission from nitrate-treated tannin rich feed for cattle in Vietnam

In developing countries such as Vietnam the population consumes more animal products for example milk and meat than before which requires greater livestock production. Ruminants contributes to more methane emission which creates a dilemma between food production and its environmental impact. By feeding ruminants with nutritive crops which humans can not assimilate the animal performance will increase in terms of better growth and milk production without inpinging on food that can be consumed directly by humans. Increasing animal performance reduces methane emission in terms of amount of methane in kg-1 milk and meat which today is much greater in developing countries than developed countries. The aim of the study was to investigate tropical tannin-rich legumes for their potential as a feed supplement for ruminants made in vitro.

System Monitor : Ett felsökningssystem för Paperline

When an error occurs in an IT system that is vital for the production of a major industry, the consequences can be great. To quickly identify and correct errors is important as a stop in a system can lead to a break in production, which is costly for the industry. Our task in this thesis has been to develop a system for ÅF that facilitates the debugging process of the system Paperline. The system's target audience is ÅF-call personnel that provides support for Paperline 24 hours a day if something goes wrong. The system consists of a Windows service, a database and a web application and is developed mainly with the techniques C#.NET, MVC 5, Google Charts, Javascript, HTML, CSS, and Entity Framework.

<- Föregående sida 49 Nästa sida ->