This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

The aim of this study is to investigate the notion of pupil influence in English teaching at level 1 and 2 at High-School level. The study focuses on how the students and teachers experience the possibility of influence in their English classes. Empirical data has been collected through questionnaires from two classes at year 1 and two classes at year 2 in English. The study also includes interviews from four teachers and four students. The study is both qualitative and quantitative.

We have chosen to write our examination essay about Ukraine, we wanted to find out what kind of possibilities there is to run a farm there, and also find out what kind of problems that might arise. Ukraine is still heavily influenced by Russia and the legacy from the former Soviet Union. The agriculture today looks pretty much like it did before the collapse of the Soviet system. There are large governmental or cooperatively owned farms. The large farms have to deal with bad cash-liquidity and they often have trouble getting a hold of seed and artificial manure to their whole acreage.

The purpose of this master?s thesis was to find problems that occur in the production line at Atlas Copco Rocktec Division, in order to decrease the costs of defect in quality. When the problems were distinguished, the authors ought to choose the problem with the highest improvement potential. One request from the constituent at Atlas Copco Rocktec Division was to connect the improvement to the document The Way We Produce. The document provides information and values about Atlas Copco and consists of 10 principles to be able to reach their vision.

Wind power is an energy source that is becoming increasingly popular in Sweden and around the world. The establishment of large wind farms supply and contributes to energy production within grid in search of a more sustainable energy production. Wind power is becoming more popular and opens up new areas of implementation. More cities are starting to use small-scale urban wind power, everything from full-scale work for a little less work adapted to the villas. Sweden has high goals regarding the production of green electricity and the work which deals with the conditions Sweden plays in achieving those goals.

The Swedish carrot market is dominated by a few big companies and three of them stands for 50 % of the market. During the last twenty years the number of growers has decreased, the area and the harvest have increased. The big producers have invested in advanced and expensive postharvest equipment that fulfils the high standards of the food industry. Few carrot producers are members of an organisation and they keep contacts with there buyers one by one. The buyers are mostly wholesalers and these have during a long period of time decreased the number of suppliers.

The purpose of this thesis is to analyze the design and function of an engine production management?s control system and its intended function, and to contrast it with the present management control systems in use on an operational level. Interviews conducted with employees from all levels of the engine production are the main source of this study?s empirical foundation. Information has also been gathered from relevant written material such as annual reports, internal documents etc.

Sickness absence is a measure of health and is therefore an important issue. To get a complete picture it´s important to also include in the discussion sickness presenteeism, working while ill, and voluntary absence, staying at home without illness. Working conditions have been proven to play a role for the three aspects which is why this study aims to further investigate the connections between them. The method used was secondary processing on interview data collected from two home care teams, one having a low and the other a high sickness absence. The results showed that there were big differences concerning working conditions, where the group with the high sickness absence perceived more stress, less control and less support from colleagues and superiors.

Bakgrund: I takt med att konsumenters preferenser har förändrats, har företag fått överge massproduktion till förmån för produktionssystem som bättre avspeglar konsumenternas ökade krav på flexibilitet. Ett sätt för att överbrygga denna utmaning är att implementera lean production. Även om detta sätt att producera på har tydliga fördelar för dagens företag, verkar lean production även kunna medföra problem i avseende på att kombinera med den befintliga, i många fall, traditionella styrningen i företaget. En del av styrningen som verkar vara speciellt svår att kombinera med implementeringen av lean production rör mätningen av produktionen. Vid en närmare granskning visar det sig att det råder vissa motsättningar mellan traditionell mätning och lean production som kan påverka företagets beslutsfattande negativt.

In this bachelor's thesis, we investigate the Swedish folk high school?s role in neoliberal society, which is analyzed through the lens of Norman Fairclough's critical discourse theory as well as Erving Goffman's theory of social deviants. The focus of our study has been participants in creative education, such as art, theater and creative writing. Our findings include that participants at folk high schools find great value in their education, both creatively and personally. They note that they have experienced a large amount of personal growth, regarding both openness towards others and higher confidence and their own abilities and identity.

This empirical work and base has been to analyze the government?s investigation (SOU 2008:27): the future road ? a reformed high school, which led to the high school reform that the Swedish government introduced as proposition (2008/09:199) about: Higher demand and quality within the high school. Skolverket (part of the Swedish government) has worked with the development of this steering document within their own mission Gy2011 in connection with the high schools during the transition. The reform comes into effect 1 of July 2011. This led to the main purpose to ask questions what high school principals and teachers think of the reform and to what extent it effects the high school programs, the examination system, what impact they see on the individual and the demand from society, and to some extent what the respondent´s answers about the government?s definition of what the higher demand and quality in the reform signify.

Induction motors, often referred to as the workhorse of the industry, play an important role in production today. Therefore, it's important to diagnose any faulty induction motor prior to failure to avoid costly and time consuming production stops.This thesis compares methods for diagnosing induction motors in operation, MCSA, Park's vector approach and the standard method used by Swedish industries today. By simulating broken rotor bars and short-circuit in one of the windings, each method is tested and the results are compared using matlab.The results need further verification due to uncertainties of the condition of the test motor, even though the experiment gives a hint of the different advantages of each method. A combination of the methods should be able to tell if the motor needs further examination..

The energy consumption in the sectors of residential and public buildings is 40 % of the total energy consumption in Sweden. The main part, 85 %, of the energy use in these sectors is for operation of the buildings. The rest is used in the building process. When energy-efficiency measures are taken the energy use during the operation time decreases and the fraction of energy consumption during the building time increases. This project is carried out in cooperation with JM AB and concerns the energy use during the building time of production of blocks of flats at the building site.The main part of the electricity that is used during the production of apartment buildings goes into the heating of portacabins and illumination of the building during the construction phase.

My aim in this case study has been to create a method for creature design to test this method in a production and evaluate the results. To achieve this I studied and analyzed the methods of three concept artists and illustrators named James Gurney, Neville Page and Iain McCaig. From the analysis of these artist´s methods, combined with my own personal experience, a new method was formed. To test this method a creature was designed based on directives given by a game design group in the process of creating a table top role playing game in a fictitious world. These directives where given for the creature´s role and its living conditions.