The purpose of this report is to collect, compile and complement the scientific and experience based knowledge concerning high pressure fire fighting today. The goal is to produce a decision data for the Rescue Service concerning the use of high pressure systems for fire fighting. Focus is on hose reel high pressure systems but other systems are discussed too. The report begins by describing the technical properties of the different systems. Then the fire fighting properties are evaluated, including manoeuvrability and safety for users.

This paper is finishing part of the two-year master programme in Industrial Engineering and Management.Initially there was an inquiry of studying the queue-times that Fläkt Woods uses when they break down internal working orders. These times were assumed to be too generalised and does not apply to the actual value of the queue-times which generates incorrect data and delivery delays. During the work of this paper it has been established that it is not the queue-times that is the biggest problem. The problem is the shop floor control and the lack of manufacturing the right products at the right time. Therefore an analysis of the production planning process was made to bring forward the real problems.

The forest in the northern part of Sweden has changed dramatically during the last centuries. The forest has gone through a large-scale transformation, from it being only used locally for domestic purposes to becoming very important raw material for Sweden in the industrial age. The strategy by foresters during the second half of the 20th century has been to create pure production forests for commercial forestry. This has mainly succeeded and we have today homogenous production forests that give a high profit to the owners. The aim of the study is to compare the state of the forest in the former state forest Hällforsmarken in the years 1925 and 2000 and to interpret the changes which has taken place.

A growing interest for the climate and the environment has led to an increased interest forenvironmentally friendly and renewable energy sources, such as biogas. Planning new biogasplants requires a decision basis including facts about approximate amounts of biogas possibleto produce at the plant. The purpose of this thesis is to develop a model that calculates theapproximate biogas and digestate production from a planned or existing biogas plant.Developing the model required a literature review and studies of calculations concerningbiogas and digestate production performed by WSP Sweden AB. As a complement to themodel development, facts about substrates for biogas production were compiled through aliterature review. In addition the methane potential from selected materials was determined bybatch experiments.

For a long time the Swedish forests were used by the landowner?s mainly for providing wood to the household itself. The wood was not, to a greater extent, considered a product to be sold. During the 1800s the industrial era led to a demanding need for wood in the industry and thus the use of forest, forest production kicked off. The forest production was not regulated by law, which led to a differentiated forest production over the whole country without consideration of re-growth.

AbstractTitle:Lean Production in The Public SectorsLevel:Final assignment for Master of Science in Business Administration.Authors:Simon Mårtensson and Ramnpreet Kaur MaanSupervisor:Stig Sörling and Tomas Källquist.Examiner:Lars-Johan ÅgeDate:2015 ? June.Aim:The use of Lean Production in the public sector is increasing and there are still opportunities for improvement that contributes to a higher customer value. According to previous research that has been done, there is a lack of research in the field of Lean production in the public sector. Thus, the aim of this study is to create an understanding of how Lean production as a concept can help to influence employees to work with continuous improvements and customer value in the public sector.Method:The study has a hermeneutic perspective as a starting point where the substance is studied from an operator approach. We have chosen to build our study with the help of deduction starting with a theoretical framework and then go into the empirical framework.

In the process laboratory of Metso minerals (Sala) AB, continuous tests have been made with a laboratory unit High-Rate thickener. The tests are made in order to compare three methods of thickening techniques of suspended solids. The three techniques are High-Rate thickening, conventional thickening and lamella thickening. The High-Rate and the conventional trials are based on a continuous method, while the lamella thickener is based on batch trials. Because the lamella thickener is based on batch trials and there were some optimization problems with the adding point of the flocculant at the continuous trials, it was not feasible to compare the lamella thickener with the other two thickener types.

This report examines the prerequisites for LEDs to replace other technologies indifferent applications. How does the different technologies for light generationwork and what are the advantages and disadvantages? The various technologieslimitations and characteristics provides the opportunities for the LEDs.This report describes a test-construction built to examine what practical arrangementscan be built with modern light emitting diodes, in order to showsome of the possibilities. The construction consists of three different applications,a high power lamp based on cold white LEDs, one based on warm whiteLEDs for the evaluation of the light characteristics and a RGB-LED based lampable to mix any colors quickly and seamlessly. The test construction also containsthe essential peripherals including control-electronics, optics and a custombuilt watercooling solution.The potential for LEDs is huge but it is complicated to build LED based applicationsdue to the limitations which mainly includes the electronics and theneccesary cooling.

The price of farmland has risen sharply in the last 20 years. This has led to discussions about what creates the value of farmland. The aim in this study was to try and find what factors are affecting the price on farmland. The area that is studied is the counties around Mälardalen during the period 2005 to 2009.The method chosen to achieve the objective is the hedonic price model. The variables are chosen after a preliminary study where a literature search has been made and a number of interviews with people in the industry.

The purpose of this essay is to evaluate how the big changes in prices are effecting pigproduction. My calculations show how much there will be left for interests and amortisation. I?ve chosen not to calculate the costs of buildings. The condition from the beginning is a production of pork with 10.000 pigs per year. Instead of buying piglets, I?ve calculated on breeding them and for that purpose I will need 440 sows. I?ve investigated the working hours and given examples of how to decries these. My conclusion is that with the prices we have to day, pork production is a hard business..

Denna uppsats undersöker hur ledarstilen påverkas av anammandet av filosofin inom Lean Production. Syftet är att granska hur ledarna kan kombinera dynamiken bakom ett pedagogiskt ledarskap och medarbetarnas medinflytande med principerna inom Lean Production. Vår uppsats bygger på den empiri vi samlat in genom sex kvalitativa intervjuer med både ledare och medarbetare på tre avdelningar inom tre olika organisationer. De teoretiska utgångspunkter vi använt oss av grundar sig i huvudsak på Arne Malténs dimensioner kring ett pedagogiskt ledarskap. Analysen är sedan strukturerad kring dessa dimensioner.

Angelica archangelica (Garden angelica) is the only Medicinal and Aromatic Plant (MAP) with a Nordic origin. The plant can reach up to three meters when cultivated. Angelica archangelica is used as flavouring in additives, honey, beverage base, essential oils, fol-klore medicine and as ornamental for decorative purposes. Commercial cultivation is mainly focused on root production. Production countries are Poland, Netherland, France, Belgium, Switzerland, and former Czechoslovakia with an overall yearly world production of 1000 kg of essential oils.

This report is a master thesis performed by Adam Lundin at the company Sandvik Coromants production facility in Gimo. The work started in January 2013 and went on for the duration of 20 weeks, which is equivalent to 30 hp. The project was executed at the department GVR10. The scope of the project was to create a base for improvements in the purchasing process of direct material to the production. The background to the project was that the centralized purchasing department has gone through changes and decision was taken to decentralize the purchasing of direct material to Gimo.

Study objects: JM, Folkhem and ABB.Purpose: The purpose with this study are to examine how the supplier relations are in the construction branch and compare that result with how the supplier relations are for ABB a production company.Theoretical: The theoretical chapter illustrates important and relevant parts of supplier relations, purchasing and supplier strategies to give good overview. The theoretical review will combine information from different fields to consent with the research problem.Method: A case study has been made on three different companies, one of the companies was active in the production industry the other two were active in the construction industry. Data was mainly collected through semi structured interviews on each of the three companies.Conclusions: The size of the company decided which point of view the company had on purchasing, traditional or modern view. All three companies had a centralized purchasing organization but the construction firms were more decentralized than the production company. The reason was that the construction firms were dependent with more flexibility when every construction project is unique..

This thesis is a survey and also an investigation of the different factors that affects the cracking that occurs in the inserts at AB Sandvik Coromants production in Gimo. The work that has been done has focused on two main factors, namely, powder characteristics and pressing parameters.AB Sandvik Coromant produces tools and tooling systems for metal cutting. They have some problems in their production of inserts. The problem is that cracks sometimes occur in the body of the insert, after it´s pressed. In order to investigate this, a preliminary study was made in which production principles were studied.