This thesis is made by Carl Persson and Alejandro Saavedra for Gryaab. Gryaab is Gothenburg?s water processing plant and produces about 60 GWh biogas annually with a flow around 1150 Nm3/h. Gryaab wants to research their possibilities to become independent with electrical energy and the possibilities to enrich, upgrade biogas. The use of methane rich gases like biogas and natural gas is today low in Sweden compared to major parts of the world.

This project investigated the current market regarding wireless net and the communication between the tools used for diagnostics/maintenance and an embedded system. Based on documentation obtained through interviews a demo system was created based on Bluetooth Low Energy (BLE) communication between an embedded system and an Android device.This report intends to describe the tools and methods used in the design of the demo system and the result of an analysis of the BLE communication.Bluetooth Low Energy is an exciting protocol with wide applicability within the industrial field. This project investigated the communicational possibilities between a Smartphone and a Raspberry Pi and based on the results that emerged the conclusion can be drawn that BLE is a protocol with many beneficial applications within industrial IT..

The Swedish pulp and paper industry meets higher demand for energy efficiencyi mprovements with increasing energy prices and changes in the Swedish renewable energy certificate system. One action of energy efficiency improvement is by using secondary heat, that otherwise would have been treated as waste heat, for use in a system with lower temperature demands. The aim of this Master´s thesis is to identify possible secondary heat sources in a typical Swedish pulp and paper mill and to investigate what economic benefits the secondary heat will provide when being used for pre heating of wood chips to a kraft digester.The Master´s thesis focuses on three secondary heat sources; dry warm air, warm water and moisture saturated warm air located inside the pulp or paper mill. Two types of kraft digesters are simulated within this study, a typical Scandinavian digester and a modern twin vessel steam phase digester.Due to quality aspects and low temperature level drying is the drying technology with dry warm air rejected. Using warm water in direct contact with wood chips increases the quantity of water to the evaporation plant and thus reduced pulp or paper production and is therefore also rejected.

In the production of pulp, paper and cardboard, a large amount of water is used daily. The water has to be purified in the internal purifying plant before it reaches the receiving body of water. In the biological purifying stage at the Stora Enso Skoghall mill, an aerated basin is used where the microorganisms, using oxygen, oxidize the organic material to carbon dioxide. The air is pumped from the bottom of the basin and the oxygen can then be transported from the air bubbles to the water through diffusion. The problem with aeration of waste water from the forest industry is that wood residues, such as fatty acids, are making the transport of oxygen in water more difficult.

Wastewater handling of private sewage systems has become an all increasing matter. In Stockholm region the 90 000 private sewage systems contribute with larger phosphorus flows to the Baltic Sea than the two biggest sewage plants in the area, Henriksdal and Käppala, contribute together, even though these two plants purify wastewater from more than one million inhabitants. When summer house areas turn into areas for permanent living ? transition areas ? the load on the existing systems increases, systems that already often are unsatisfying. In those areas it is not clear what the best system choice is; On-site systems for single households; Local collective systems or Connection to central systems.

The power consumption has grown rapidlyin the last decade. Fossil fuels and theneed for alternative energy sources aregreat. Ocean waves are a renewable andsustainable source of energy that hasbeen relatively untapped. At UppsalaUniversity research and development havebeen done for several years. Severaltypes of wave energy converters (WEC)have been created.

Interior window shutters can be found in historical buildings, but they are an uncommon occurrence in modern buildings. In modern contemporary construction, large glass panels are often the ideal because of increased light inflow and for architectural purposes. However, this can generate several negative effects, such as increased energy loss, lack of privacy and high sunlight penetration. Problems that window shutters could have accommodated historically. This thesis identifies a lack of knowledge about interior window shutters in the Swedish building stock.

The importance of energy- and environmental issues has increased, and the work towards reducing carbon dioxide emissions plays a major part. The European Union has set up goals for the membership countries to work towards this to happen. The carbon dioxide emissions in Sweden have been reduced the last few years, but there is still a lot to do. About 30 per cent of Sweden?s carbon dioxide emissions generate from energy usage related to housing, this is why the housing sector is of interest to examine.

Syftet med detta arbete är att undersöka om man med utgångspunkt i Steampunk-genren inom datorspel, kan göra en implementation av stereotypa High fantasy-element och hur det kommer att uppfattas av Steampunk-entusiaster. Kommer de överhuvudtaget att märka skillnaden och om så är fallet, hur pass stor inverkan tycker de att implementationen har?För att undersöka detta så skapades två karaktärskoncept, en man och en kvinna. Dessa karaktärer utrustades sedan med fyra uppsättningar karaktäristiska kläder och föremål från Steampunk-genren. Sedan lade jag till två stereotypa detaljer från High fantasyn på varje karaktär.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.

Australia is one of the largest producers and consumers of fossil fuels in the world. In a society where the effects of fossil fuels on global warming are constantly discussed, the nation?s production and consumption are subject to debate. Problems arise when negative aspects of consumption, such as emissions of greenhouse gases, are put in relation to an increased need of energy and economic growth. However, it is important to distinguish between different types of fossil fuels when it comes to their individual impact on the environment and to analyze the possibilities to increase the more environmental friendly ones.

Difficult calvings and stillbirths are problems in Swedish dairy production that result in large expenses for the farmers and welfare issues concerning the animals. A common opinion is that the live weight of SRB and SLB is increasing, and whether increased weights have caused the increase in calving problems has been discussed. The aim of this study was to investigate the relationship between the relative birth weight (calf/cow) and calving difficulty and stillbirth, respectively. The importance of breed and parity for the relative weight has been investigated, and comparisons with previous studies have been made to evaluate whether the relative weight has changed over the last decades or not. The study was based on 807 calvings, registered during the period 1993-2003 in the experimental dairy herd of the Swedish University of Agricultural Sciences (Jälla).

Several scenarios point toward a future where we are far more people on Earth than today, where most of those people will live in cities and where oil no longer dominates in the transport systems and in agriculture as an energy source and where less energy will be available to us. The report investigates what areas in traditional ecological knowledge that can contribute to the transition that follows a future with less energy and establishes three areas with the potential of becoming important: areaspecific biological knowledge in societies that are more dependent upon its surrounding environment and its natural prerequisitesthe local management of these biological resources, which often means a fair sharing and sustainable handling of the resources and which has been observed in Nobel price awarded Elinor Ostrom?s researchthe world views that lie behind how the environment is considered and managed, world views that can inspire and point toward how we in the future should formulate world views that do not give the destructive modern management of the environment It is also noted that the magnitude of the city living in the future is a historical news and that very little research has been done in how traditional knowledge can be transferred into this kind of living..

In most countries, the dairy industry focuses on the volume of milk produced instead of its composition. This results in a high content of water and a lower proportion of fat and protein. A high proportion of water is not desirable when processing the milk into various dairy products like cheese, cream and milk powder. High water content also increases the costs for transport and storage, and also an unnecessary, albeit marginal, strains on the world?s water reservoir.

Today, about 15 to 20 percent of Sweden?s total emission of carbon dioxide can be traced to the household sector. By examining apartment blocks in a life cycle perspective, the origin of the carbon dioxide emission has been charted and analyzed. This information has been used to create a computational model that calculates the total emission of carbon dioxide from a specific apartment block. The results from the analyzed apartment blocks indicate that both the use of energy and the emission of carbon dioxide have been reduced since the 1960s. Through the examination of building materials, it is possible to lower the emission of carbon dioxide that origins from the construction phase of an apartment block.