This thesis concerns to investigate renovations of existing buildings aiming at enabling energy efficiency, from a conservation and restoration perspective. This includes performing case studies of three projects in the Gothenburg area where renovations has been done and an analysis of directives raised by the EU and later implemented by the Swedish National Board of Housing, Building and Planning, Boverket. In addition to these, regulations enforced by the Swedish law, related to the topic, have been considered.The investigated projects in this case were the housing cooperative Välten in Brämaregården, the Solar Buildings in Järnbrott and Gårdsten as well as Katjas Gata 119 at Backa Röd. In order to measure and compare the results of these projects a comparison between the pre- and post-restoration energy consumption have been performed. To capture additional perspectives the grading system Operation Kungsörn has been applied.Regarding the comparison of energy consumption the renovation of Katjas Gata 119 was found preferable but showed in my view lacking attention to the cultural heritage of the area.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

There is always a need for more effective ways to store energy in order to reduce the human impact on the environment. One step on the way can be the use of flywheels as kinetic energy storage devices. Low frictional losses are essential for a flywheel to be effective. To minimize these losses active magnetic bearings (AMB) can be used to keep the shaft centered instead of the more conventional ball-bearings. AMBs use actuators and a fast control system that needs correct and noise-free measurement data of the shaft position and the current in the actuators to work properly.This thesis explains the process of constructing power electronics and a current measurement system for active magnetic bearings (AMB).

The institution of Engineering Sciences at Uppsala University in cooperation with Umea? University is working on a project where they will examine the decision-making in extreme situations. A part of this project is to investigate leadership in high altitudes expeditions.This report will discusses the type of leadership used in high altitudes expeditions. Then, to examine how well you can use it in companies and organizations, and the ability to prevent company?s disasters with this kind of leadership.This is done by studying different company?s stories, where they gone bankrupt or fallen into a deep crisis.

VAV (Variable Air Volume) system has been studied in a newly constructed office-building. The goal for the study has been to evaluate how the ventilations system work in practice, if adjustments can be made to achieve an more energy efficient system and to evaluate if other alternative ventilation systems is to be preferred in the further.The degree project has been executed at Helenius Engineering Firm who is working with the environment, media systems, HVAC and energy in buildings. The building that has been studied is owned and operated by Akademiska hus.Literature studies, visits at site, inventory, review of system documentation, energy analyses, interviews, key figures, LCC, sand energy- and indoor climate simulations has been made to study the building. Where appropriate some tools from Six Sigma have also been used.How to achieve an energy efficient system and a pleasant indoor climate is studied with human health and well-being as base for the indoor climate requirements. Technical support systems such as ventilation systems have to be designed so that an acceptable indoor climate can be achieved.

NCC ROADS Sweden east is a part of the NCC Corporation. The company mainly produces aggregates, asphalt and concrete. They have taken the environmental issues seriously and been working with that since the middle of the nineties. When manufacturing asphalt large a quantity of fossil energy is needed. The company is now about to make further progresses by manufacturing environmental friendly asphalt (?green asphalt?) with using bio-energy.

To achieve the Government's milestones for 2018, which means that 50 % of food waste shall be separated from household waste and undergo biological treatment (composting or anaerobic digestion).   Hultsfred, Högsby and Vimmerby are three adjacent municipalities of Kalmar, county Småland. During 2012 and 2013 analyzes were performed on their household waste to determine its composition. The household waste is currently collected in one fraction. The work, examines how much food waste the household waste contains. From the amount of food waste, the biogas potential is examined - how much food waste biogas generates and how much energy it corresponds to.   Food waste is broken down by microorganisms under anaerobic conditions (anaerobic digestion) in a biogas plant.

District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

The purpose of this development project is to create a model for working with a high school project in Electrical and Energy Program. It should be conducted in a form like companies do according to the goals from The Swedish National Agency for Education. In order to fully perform this we use the concept of Young Entrepreneurship. The model is created according to the new conditions from The National Electrical Safety Board. There is now an exception saying that a student during education is released from the demand of employment that is the normal procedure where you are under supervision from a certified electrician. During the project there has been theoretical and practical examinations in order to clear out the advantages and disadvantages using this model, but also to examine whether it is useful in the future and to what extent it can be used. The result indicates that the model is useful and fulfills the goals from The Swedish National Agency for Education but that the model has its limitations and difficulties.

The climate changes that are occuring in the world have resulted in that the EU callingfor a 20 % reduction in energy consumption to the year 2020, to reach that goal theEU want the public sector to go forth as a good example. Västfastigheter owns andmanage the hospital buildings in the Västra Götaland region. To be able to reducetheir energy usage Västfastigheter has hired several consulting firms to chart out theenergy consumption on each hospital building. The biggest energy savings potentialhave been calculated and what the cost will be to perform each action. The energyaudit have been completed and stand as the decision basis for Västfastigheter?s choiceon which action packages that should be implemented.

Energy issues are constantly increasing attention in today's society. People's impact on Earth isentered in more contexts. Many discussions are about how the entire social structure needs to bestreamlined in order to achieve sustainability. The residential and service sector accounts for 39 % oftoday's total energy consumption in Sweden and the increasing electricity prices have made buyersmore interested in energy issues.There are many buildings in need of refurbishment today, including all the apartments that werebuilt in the 1970s to reduce the housing shortage at the time. 650 000 apartments of one millionapartments were built during the so-called the one million program and is currently in need ofrefurbishment.

The present climate discussion has made energy efficiency an interesting topic. Saving energy does not only help the climate but also saves money for the energy consumer. The purpose of this thesis was to examine the potential of heat recovering from milk cooling. Two milk farms, one with voluntary milking system, VMS, and the other with conventional milking system was used to measure interesting temperatures and electricity consumptions. The numbers were used both to do theoretical calculations and to construct a SIMULINK model. To calculate the potential for heat at milk farms theoretical calculations were made in MATLAB using a reference farm with different combinations of heat recovery and pre cooling. The farm was assumed to keep a dwelling house with the annual heat consumption 18165 kWh.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

The purpose of this study is to create a method that can be used to produce decision supportdata for the climate goals of a municipality. The method should be able to demonstrate the potential for reducing energy use and greenhouse gas emissions for measures aimed at the stationary energy system in the municipality. It will be used to make long term projections of energy use and greenhouse gas emissions in order to be able to demonstrate the ability to reach climate goals. The aim was also to test the method's applicability by using the municipality of Uppsala and the Uppsala climate protocol project in a case study. Uppsala climate protocol is a project consisting of participants from business, government and organizations that voluntarily want to commit to reducing their carbon footprint by reducing their energy use and thus work to achieve the municipality's overall climate goal.

This is a study concern high school student?s view of religion and their religiosity. I dispensed a questionnaire to 124 high school students studying comparative religion in a large high school in Sweden, with the students from different socio-economic backgrounds. The result I came up with is that traditional religion activities have decreased, religion has not disappeared but taken other shapes than before. And I also came up to with the result that more than half of them who answered the survey likes the subject and there are tendencies by them who doesn?t like the high school subject religion that they live in a non-religious family.The study concerns following aspects: sociology, youth, human needs, religion, spirituality and individualization..