Geothermal energy can be extracted from an aquifer, where the groundwater is used as heatexchange medium while heat and cold are stored in the surrounding material in the aquiferand to some extent in the groundwater. Application of aquifer storage for the use ofgeothermal energy is mainly used in large scale facilities and is limited to sites with suitableaquifers in the form of ridges, sandstone and limestone aquifers.Löwenströmska hospital in the municipality of Upplands Väsby, north of Stockholm, islocated nearby the northern part of the Stockholm esker. This means that it can be profitableand environmentally beneficial for the hospital to examine the possibilities of aquifer storagein the esker material next to its property.The purpose of this master thesis has been to investigate if geothermal energy storage with aseasonal storage of heat and cold can be applied within Löwenströmska hospital?s propertyarea using groundwater modeling. A hydraulic groundwater model was constructed inMODFLOW based on a simplified conceptual model of the groundwater system.

The aim of this Master?s thesis was to find out more about the delimiting quality- and shelf-life parameters over time for liquid oat-based products. According to that, to present applicable subjective and objective shelf-life test approaches at accelerated conditions. The study aimed to gain a deeper knowledge concerning the general and accepted way of performing accelerated storage tests. This study focused especially on products, which suffer from quality failure caused by oxidation, such as liquid oat-based products.

A growing number of cities and municipalities in Sweden begin to work with city models in 3D. For the most part the models are used for visualizations of ongoing planning processes, but also for the analysis of noise, shadow studies and environmental disaster simulations.Gothenburg continues to develop the use of 3D maps in municipal operations and is demanding a way to create building elements (walls), which generates in 3D buildings, from roof constructions that are mapped from the primary map. A method has been investigated in the present study. The results are then presented as a 3D model of buildings, along with a terrain map that will facilitate the localization of the area. The created 3D buildings are then compared with roof-data from the primary map to see how well they harmonize with each other.

The objective of this diploma work is to investigate a set of Multiple Input Multiple Output (MIMO) channel models compatible with the emerging IEEE 802.11n standard. This diploma work validates also advanced, innovative tools and wireless technologies that are necessary to facilitate wireless applications while maximizing spectral efficiency and throughput. MIMO channel models can be used to evaluate new Wireless Local Area Network (WLAN) proposals based on multiple antenna technologies. The purpose of this thesis is to investigate means of channel models and their implementation in different environments such as: Matlab, C++ and Advanced Design Systems (ADS). The investigation considers also a comparison between the channel models based on theoretical data and parameter setup to the channel models based on statistical characteristics obtained from measured data.

There is always a need for more effective ways to store energy in order to reduce the human impact on the environment. One step on the way can be the use of flywheels as kinetic energy storage devices. Low frictional losses are essential for a flywheel to be effective. To minimize these losses active magnetic bearings (AMB) can be used to keep the shaft centered instead of the more conventional ball-bearings. AMBs use actuators and a fast control system that needs correct and noise-free measurement data of the shaft position and the current in the actuators to work properly.This thesis explains the process of constructing power electronics and a current measurement system for active magnetic bearings (AMB).

Användandet av datorn i vardagen har gjort att behovet av att lagra data har ökat med 100 % varje år. Den exponentiella ökningen av information beror mestadels på det ökade användandet av Internet . För att hantera mängden av data så måste IT-enheter börja fundera på att centralisera sin datalagring. I rapporten ges det en beskrivning på nätverkteknologier och kriterier för hantering av datalagring. För att beskriva verkligheten intervjuades två medelstora organisationer som har infört nätverkslagringslösning.

In my work I have chosen to examine the profitability for small scale production of hemp briquettes. My study also includes a review of which briquette technique that is the most common one among small scale producers. The reason that I have chosen this subject is because of the discussions about climate and energy that we face almost every day. I also think the subject is extra interesting in these days when the grain prizes are at a historic high level. In order for me to achieve a reliable report, a hemp and briquette producer has given me the actual data from his farm. In that way I have been able to make my calculations from a concrete perspective.

Thinning is one of the most important silvicultural activities in middle aged forests, partly to minimize damages and partly because it leads to earlier harvesting revenues and increases the value of the remaining trees. There are many different indices used to describe stand density and thereby the need of thinning in forests today. Studies have shown that forest variables can be estimated with high accuracy using airborne laser scanning and it is likely that the method could also be used to estimate forest density indices. In this study, the possibility of using the forest density index ?H² to determine and map priorities for thinning operations for a forest area was examined.

Background: The competition is getting harder between the universities. To reach the high school students and discover which means of contact they prefer and how they perceive student recruitment are important issues in order to succeed in marketing strategies.Purpose: The purpose with our report is to investigate, analyze and compare the student recruitment in three universities and investigate how the high school students want to be contacted. Then we compare to see if they think alike.Method: We have done a qualitative study and chosen to use focus group interviews for the high school students and interviews for the universities to collect our empirical data. We have compared the empirical data and analyzed it with communication processes and marketing communication as theoretical grounds.Result: All of the universities work approximately the same way with their student recruitment. They put a large effort in the Internet and social networks as well as the personal contact.

The purpose with this work that is the basis for this thesis was to help Nattavaara Economical association to develop a program for handling invoices, customer information, and storage. The program and this thesis have been done in cooperation with the economical association in Nattavaara. Some of the demands on the program are that it shall handle customer information, storage status, invoices and diesel consumption. The program must be able to printout invoices, reminders, delivery notes, a customer list and a storage list. All information will be stored in a database.

The project has been performed in a close collaboration with Hörsam who works in the field of hearing technology. In a first meeting with the company, the Project group was showed a few existing storage boxes for hearing aids. The company thought they were unnecessarily large with plenty of unused space and wanted a new, smarter solution to be developed.The project began with user studies in which audiologists, maintenance technicians, future users and others were interviewed. The purpose was to obtain their views on today's storage boxes and to find out how well the users maintained their hearing aids. It proved to be a large lack of knowledge regarding the management of hearing aids within the users.

Background: The competition is getting harder between the universities. To reach the high school students and discover which means of contact they prefer and how they perceive student recruitment are important issues in order to succeed in marketing strategies.Purpose: The purpose with our report is to investigate, analyze and compare the student recruitment in three universities and investigate how the high school students want to be contacted. Then we compare to see if they think alike.Method: We have done a qualitative study and chosen to use focus group interviews for the high school students and interviews for the universities to collect our empirical data. We have compared the empirical data and analyzed it with communication processes and marketing communication as theoretical grounds.Result: All of the universities work approximately the same way with their student recruitment. They put a large effort in the Internet and social networks as well as the personal contact.

This thesis is intended to review and create a greater understanding for the history and originsof printed scraps from late eighteenth century to the beginning of the twentieth century.A questionnaire survey was sent out to several Swedish museums, containing questionsconcerning their collections, possible exhibits, special difficulties and types of damagesconcerning scraps and their current storage. A visit to the Gothenburg city museum storagewas made to take a closer look at their scrap collection and how they were stored. Thisresearch resulted in an understanding regarding the current situation of printed scraps, whichunfortunately appears to be quite poor and inattentive. These results are presented in the firstchapter.The second chapter describes the history of printed scraps, followed by a chapter presentingrelevant printing techniques and technology. This is followed by various chapters dealing withhow the printed scrap has been used through the ages, history and development of motifs andthe album's significance.

Increased resource efficiency in an energy system could result in large economic and environmental benefits. Tekniska verken i Linköping AB (Tekniska verken) is responsible for the district heating network in Linköping. Their vision is to create the world?s most resource efficient region. An important step towards this vision is more efficient usage of produced heat, something which could be achieved through integration of a seasonal heat storage in the energy system.

This degree project has been carried out by Niclas Andersson and Sebastian Zwahlen, students of the Innovation and Design Engineering Program at the Faculty of Technology and Science at Karlstad University. The project was carried out during the spring 2010 and includes 22, 5 ETCS credits.Initially the group had contact with the company Mavis möbler AB. Mavis gave the group the task of developing a new bedroom product. To assess the needs and problems of bedroom behaviors, an extensive questionnaire and several interviews were made. This became the starting point for further work.According to the results uncovered during the market research a vast problem was found with temporary clothing storage.