When planning new wind farms, the cost for the internal electrical grid is estimated to account for 8-9 % of the total investment cost. On top of that, the cost for accumulated reduced income over several years (due to electrical losses), has to be added. The economic lifespan is relatively long (about 20 years) which means that an error in the loss calculation could lead to a bad decision basis. The accumulated reduced incomes due to electrical losses can be higher than the initial investment cost for the internal electrical grid.Today, Statkraft Sweden is using a template number when estimating the electrical losses in a wind farm. The actual losses are probably lower than the template number which could lead to an unnecessary high loss cost when planning a new wind farm.The aim of this M.Sc.

AbstractWith increasing population and increasing demands for comfort and thus an increase in energy demand, it is necessary to examine various energy-efficiency measures. This work deals with the ability to control the flow through the heating system to achieve the desired comfort with as little energy as possibleA heating system contains of different parts, roughly speaking, you can divide it to three main components: Heat source, Distribution and Heat emitters. All components are working together to bring heat to the building. What is examined in this report are different ways of adjusting the flow and supply temperature and how it affects comfort and energy use in a building.At today ?s date the conventional method is to use a high flow through the heating system, which affects pressure drop and cooling of the fluid.

The thesis describes a completely new biofuel system to generate particle-free heat from combustion of ash-containing biofuel particles at high temperatures.The suggested system gives opportunities to introduce biofuels in new areas.Main components in the suggested system is a heat radiating combustion chamber intended for pulverized wood, combined with regenerators to extract heat from flue gases and simultaneously preheating the combustion air.The thesis contains a description of the suggested system, theoretical considerations, calculations regarding the combustion, and includes results from tests performed.The results from calculations and tests performed concludes that the system is workable and possible to apply..

Fortum has in a pilot project installed metering equipment with wireless communication in secondary substations in Stockholm. So far, the collected data are used only in specific projects.This master thesis was carried out at Fortum Distribution AB in Stockholm during 2013. The purpose of this study is to simplify and enhance the use of data in for example network planning process, by giving suggestions on how data can be managed and giving examples of analyzes that collected data can be used for.The electricity meter which Fortum has installed is a EDMI-Mk10A which is set to measure max/average/min values with a one hour time resolution of the following parameters: voltage (per phase), current (per phase) andactive power and active and reactive energy.In order to analyze the collected data an analysis tool is required. During this thesis two customized tools in Microsoft Excel have been developed, one for sorting data and one for analyzing.One aim of the thesis is to show examples of what collected measurement data can be used for. This work shows an example of analysis of active power, power factor, voltage, occurrence of interrupts and the relationship between outdoor temperature and power.This master thesis has among others resulted in the following advice: Expand the number of secondary substations with measuring equipment.

A quantitative and qualitative study of all LIS Master theses applying a gender perspective on children-centred issues previously published at the Swedish School of Library and Information Studies. Two hypotheses were investigated: 1) studies with explicit gender perspective express strongest urgency; 2) study results confirm predeclared assumptions. A content analysis of all theses, and closer thematic analysis of ten, form the main question: Is there a risk that the theses? similarities in terms of urgency and confirmation create predictable conclusions? The theses? motivations behind the choices of research problems are explored in the content analysis. Two categories of motivation can be identified: 1) personal; 2) generally applicable.

AbstractThe assignment were assigned by Camatec Industriteknik AB. Camatec is a Karlstadlocated consulting company, they make everything from pilot studies to complete projects in mechanical design and calculation. They even have their own patented product, Camcoil. It is a winder for steel strips and is used for example with hardening of the steel strip. The assignment has been to solve the problems encountered by some customers within this product.

Migration is a worldwide phenomenon that has occurred for thousands of years in a vast variety of species. The general knowledge of migrating animals is poor even though billions of animals from a range of different groups migrate every year. The human impact on migrating ungulates is high and many populations are declining globally due to direct and indirect causes. Hence it becomes vital to study the migration phase and the habitat and resources selected during migration. The objective with this study was to identify the habitat characteristics and resource selection of moose during migration and compare the selection between different seasons and utilization distribution (relative frequency distribution for the points of location of an animal over a period of time) categories.

Today when new and harder demands on CO2 emissions are developed, vehicle manufacturers must work to develop new engine solutions to new kinds of fuels to replace fossil fuels. A fuel that could be applied is hydrogen. When hydrogen is combusted only water vapor occurs. Hydrogen is known to be explosive and flammable. These properties are both good and bad for combustion.

This thesis contains an empirical study of exhaustivity in the Swedish National Union Catalogue LIBRIS. The purpose of the study is to examine if fewer numbers of indexing terms in general lead to lower exhaustivity. The study contains two parts, the first part examine the mean of indexing terms per monography in the selection, the second examines the grade of exhaustivity within three groups with a low, moderate or high number of indexing terms. The 55 randomly selected titles were graded on a scale that was created from the indexing theories of Wilfrid F. Lancaster.

The purpose of this investigation was to study what students in in the first year of the social science program in high school think about the guidance they had access to during their time at primary school. This is to ensure that it the guidance students are entitled to and contribute to the development of the business. The survey was conducted at two different high schools in southern Sweden. A total of 57 students participated in the survey. The results show that 46 and 29 percent of students at the two schools did not feel they had the information they needed for their upper secondary school The results proving what previous research reached that students selection process can lead to stress and uncertainty associated with the choice to high school. The results of the present study showed that girls in particular have high standards for themselves and experience stress and anxiety associated with their selection to a greater extent than boys.

This study investigates how nutrients from source-separated human urine from Gothenburg properties can be used as fertiliser in agriculture or for parks or sports fields. The initiator is the Department of Sustainable Water and Waste Management at the City of Gothenburg. Today urine-diverting systems are installed in two apartment buildings and two public-use buildings. Urine recycling is expected to lead to less exploitation of natural resources and less eutrophicating discharges into water recipients. In the study the urine?s market potential is investigated, for which practical handling issues, business aspects and acceptance of customers, employees and visitors have proved to be important.

The local politicians in Sweden are responsible for a great deal of the welfare system why one would assume that there are a lot of demands put on them - demands for certain skills or a certain level of competence. I have in this study tried to find out how the demands on the local representatives concerning the demands for competence and the actual level of competence among the politicians are affecting the local politics. This was done through investigating how the local politicians are perceiving their level of competence and the demands put on them, but also how the employees are perceiving the demands and the level of competence put on the politicians. The study was made in the municipality of Gislaved in Southern Sweden. I was using both quantitative method (an opinion poll among the politicians and employees in the municipality) and qualitative method (interviews with three politicians and three employees and literature studies).In order to investigate the demands for competence I split the concept into ?soft? competence (socially and emotionally based skills), and ?hard? competence (skills based on knowledge, education and experience).

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

The purpose of this thesis is to present and describe which criteria, according to the systemfamily Configuration Management, should be met when developing a CM-tool to handlemigration data.ACT is a tool developed by Microsoft to gather information about, analyze, test and mitigateapplications in a network when migrating the IT-infrastructure of an organization to a newoperating system. The organization that is being studied wants to present the data about theanalyzed applications in such a way, that a customer can choose what to mitigate and migrate.The goal is therefore to develop a prototype (CM-tool) that will present this data.The study has shown that ACT lacks certain requirements stated by the organization when itcomes to presentation. But when it comes to the rest of the functions, ACT performs as expected.The investigation resulted in specifications and technical solution for the new CM-tool. CMcriteriafor migration data was put forth and parts of the prototype were also developed..

This report is made as a literature review, focusing on the work done to increase understanding of efficiency in the categories of substations and secondary heating systems, with respect to the deviation from the theoretically possible cooling off in the distribution network as well as the economic benefit that appear. The main purpose of a considerable part of the literature used in this report addresses the issue of identifying individual causes of reduced cooling in district heating systems. These literature resources have been compiled and summarized as part of the report.The technology of district heating is associated with benefits such as better use of the energy in a fuel. This is the case of cogeneration plants where serial generation of electricity and thermal energy increases efficiency compared with the parallel generation where heat is generated locally and electricity is generated centrally. Serial generation thus allows for lower primary energy demand.